Writing a script file is more difficult with the current version of AutoCAD (2012) than i used to be with older version? What i wanted to do is to insert an as-built block to 198 drawings
Open a drawing
insert a block (same location, same scale, same rotation)
save
and close
Is there any other way beside writing a script file to do this?
I had an engineer use another engineer's desktop computer for a week. When the orginal Engineer came back to work and started trying to use AutoCAD 2010 it now wants to write to the second engineers Windows profile.
View 6 Replies View Relatedwhy our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies View RelatedIs it possible to attache a PCG file created with ACAD 2013 in ACAD 2012? I ask because I keep getting the message "the point cloud data file is not valid!". I have tried using both x86 and x64 and get the same error. I have also tried with ACAD 2011 and get the same error. The file was created from a Leica PTS file.
View 2 Replies View RelatedUsing AutoCAD 2012 SP2 on WinXP.
On a file server, when a folder permission has been set to "deny delete" we cannot navigate to that folder in the open file dialog box.
I have a file path im trying to capture in a text file however its not working and autocad is prompting back,
; error bad argument type: streamp nil
Im assuming its because of the slashbacks but Im not sure..
Hence the code so far...
(defun C:GO ()(SETQ ACADLSP (findfile "acad.lsp"))(setq f (open "C: est.txt" "w"))(write-line ACADLSP f)(close f))
I have drawings that are saved as ACad 2010 and need to work on them in ACad 2014. I am receiving error messages saying the drawing is damaged and requires recovery. Errors are being detected and some files I can eventually open but edits are missing. Others I am unable to open and I get a message "audit could not correct errors in database".
View 3 Replies View RelatedIs this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedI have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View RelatedI am experimenting with a simple form of CAD/CAM and would like to be able to export the coordinates of my drawing to a data file in order to use it as an input file forthe CAM system. I am running AutoCad 2000 and would expect to be able to have this option available under the Plot command but have not been able to see how it can be done. For example, taking the simple case of a rectangle, I would like to be able to write to file the coordinates of the four corners of the drawing.
View 9 Replies View RelatedWrite the elevation text in a cad file from attached text file.
In this text file Easting Northing and Elevations are given. We have hundreds of that text files.
I am writing a external ilogic riule, which will iterate through all the referenced documents of the active assembly and write certain iproperties to a text file.
The code is below
It works in that the text file is created and it does write the iproperties. HOWEVER it only writes the iproperties from the active assembly
' go through all referenced documents in a assembly . Grab the description,title and part number iproperties
' and print out a list
If Not ThisApplication.ActiveDocument.DocumentType= kAssemblyDocumentObject Then
Return
End if
[Code]....
How can i fix this code so that it writes the iproperties for each oFileRef ?
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
I have a large number of images for which I need to collect various data points that photoshop and its plugins produces (i.e., histogram RGB mean, SD, etc.). I'm looking for a way to write this data to a *.dat or *.txt type file from automated manipulations. The structure would need to include the image filename, and all the values captured that are associated with the image.
View 1 Replies View RelatedI have a problem with After Effects CS 5 on Windows 7 64 bit.When I try to render out quicktime formats in After Effects I get an error message:
After Effects error: Rendering error while writing to file "E:/ . Unable to open file. (-1610153459)
Rendering to other drives, like C: or D: works fine but as soon as I try to render to the E partiton.I get this error.... It must have something to do with permissions on that partition.I don't want to reinstall windows.
I have just purchased this upgrade software having used XARA Xtreme4.0 for many years.How can I change the black background screen with white writing to grey with black writing?
View 9 Replies View RelatedI have Photoshop Elements 12. I can backup a catalog to my Mac, but not to an external drive. I have tried two different externals. Both work with my PC, but not the Mac. I created a new 1 photo catalog as a test. It will back up to the Mac, but not the external.
View 1 Replies View RelatedI have a subroutine i wrote that works fine.Just not sure how to turn it into a batch processor so i can apply it to all the files in a directory. And would I just run it like i run the non-batch version, like, from a document? Or is there some kind of batch process setup in corel where I can just load a sub and point to a folder and run it, like illustrator?
View 8 Replies View RelatedWhile trying to do a full backup to an external hard drive, I am getting a message "error encountered while writing file" after about 75% of the 14,000 photos. I believe I have traced the problem to a missing slide show presentation program that was on an external hard drive (F) I no longer have. The program still works (from the C drive), however if I click on the program thumbnail in the Organize screen (which points to the F drive), and try to delete it, I get a message "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media." I believe that is because it is looking for the program on the non-existent F drive. What can I do to enable a backup?
View 4 Replies View RelatedI am trying to move my catalog from a Windows xp computer to a new Windows 7 computer.In attempting to do so I an trying to make a backup of my catalog.When I attempt to make a full catalog backup I get an error message at the end of the writing of the backup file. The message is: "Error encountered while writing file."
The images are written to the backup file (> 20,000 images) and the Catalog.buc is written as well, but the Backup.tly is missing in the backup folder.I have gone thru my catalog and have found no unconnected files and no file that are in need of repair. Everything seems to be in order with the catalog.
When I try to export an image I get the error "An error occurred when writing the property "Revision number" to the file". The file still exports but I would like to get rid of this error.
View 5 Replies View RelatedI am trying to make a script file to open a drawing and run a lisp routine. They both work independently just fine, the script file will open the all of the files fine... and the lisp is in the startup suite and works in all the files. But when I tell the script file to open the first drawing then run the lisp it hangs trying to open the next file after running the lisp. I have Filedia set to 0, but the message I get when it goes to open the next is "No canvas exists. click New Canvas." (And on top of that... Filedia even set back to 1 still does not display the Dialog box anymore, I have to shut down AutoCAD 2012 and start again then it works.) I Have tried several ways, Opening one at a time then run lisp, and open all files first and then try to run lisp (that closes the file after running) and try and run it again in the next... It will only run the lisp one time and then locks up from there.
View 7 Replies View RelatedI have been having problems with Autocad 2012 (running on Windows 7/64bit) where it keeps getting hung up and I get the spinning wheel and the (not responding) message... I notice this happens most often when I am editing attributes of a block, editing text (by double click or through the properties window), or printing to PDF. I am unable to shut down autocad, Windows 7 will not let me end the process in the task manager, and I have to shut off the power on my laptop to force it to shut down. On the few occasions where I got the window to close, Autocad would not re-open, the start up screen would just get stuck at Initializing..
View 4 Replies View Relatedhow to disable F1 in autocad 2012. How to do this in 2012 version. The F1 key doesn't appear in the CUI under keyboard shortcuts. My internet connection goes off and on and when it's off hitting the F1 key freezes my computer. so I need to disable it.
View 4 Replies View RelatedI have saved back a drawing to 2007 in Map 3D 2012. I have tried to open it in AutoCAD Map 3D 2010 but get a fatal error:
"Exception in ird.arx ARX Command
Unhandled Exceptiion 10002000 (Access Violation Reading 0xa433aef8) at address 5E2D89DCh"
"AuotCAD Error Aborting
FATAL ERROR: Unhandled Access Violation Reading 0xa573b9c0 Exception at 5e28a140h"
What does this mean and what can I do to be able to open the drawing in AuotCAD Map 3D?
I use a user-defined hatch often - just 45 degree lines say 4" apart in model space. In 2009 I could make this annotative and the paper distance between those lines would remain the same as long as I made sure the hatch had the appropriate annotive scales associated with it.
In 2012 when I try to do the same thing, the hatch stays at the same Model space spacing in every viewport even though the viewports have different annotative scale AND the hatch has matching annotative scales.
I've downloaded it several times, but it seems it just will not install.
heres the log:
2012/10/11:15:59:33 midnit_angel13 ANGEL === Setup started on ANGEL by midnit_angel13 ===
2012/10/11:15:59:33 midnit_angel13 ANGEL Launch
2012/10/11:15:59:47 midnit_angel13 ANGEL === Setup ended ===
[Code].....
My ribbon an pull down Menu show a Express tools comand but the comands dont work
which is the file that is loaded to run the expresstool?
why with autocad 2012 mechanical, I can't no more embed PDF or Images to a drawing but only load it as references, linked to a file path?
Previously I used Autocad 2009 MEC and there wasn't this problem.
I shall fix this because, when I load a dwg to our company management system, the pdf or images shall be embed to the dwg file.
If I load the pdf as OLE Object, it doesn't lock the view and the pdf zoom canghe with the dwg zoom, so it is acceptable.
I´ve started at a school which is using autodesk inventor 2010, but on my computer I have autodesk inventor 2012, and I can´t find the way to open the homework I do at home on the school computers.
It is supossed that my inventor 2012 saves the files in 2010 format as I can read on the settings, but when I open it on the 2010 in shows me an error message about that it´s not possible open this file. Also I´ve tried to save as 2007 format, but it can´t open it.