We are now running AutoCAD 2012 on our network. We had a third party come in a long time ago and write us a custom macro that generates specsheets for our product. The problem is it was written for AutoCAD 2004.
move that code from 2004 to 2012 somewhat easily. If not easily, at least tell me that it is possible without having to rewrite the entire macro.
We are now running AutoCAD 2012 on our network. We had a third party come in a long time ago and write us a custom macro that generates specsheets for our product. The problem is it was written for AutoCAD 2004.
Any way to move that code from 2004 to 2012 somewhat easily. If not easily, at least tell me that it is possible without having to rewrite the entire macro.
why few of the drawings processed in Autocad 2004 version and saved in autocad 2000 cannot be opened in different Autocad version such as 2012
View 6 Replies View RelatedWhen I try to import my custom tool palettes onto my co-workers computer, his machine does not see the xpg.
My machine is a 64 bit computer and his is a 32 bit.
Is there a way to convert the xpg to a different extension or will I have to set up his palettes from scratch?
My company have some custom menus and some some lisps that are related to it.
to install the menus in r14 first we opel tools/options/Files then we add the custom folders under the Support File Search path then we load the menu and open the Display screen menu and after all the commands can used under the screen menu.
this also work under acad 2000 but cannot find a solution under 2010
I just started working for a new employer as a 2012 AUTCAD Tech: they have only used old school DTEXT for everything (what a pain compared to multi-text "MTEXT").
Problem: I converted several single line Dtext to Mtext (.075 test height) paragraphs but can not achieve the same spacing they have been using (.225) because .025 is not an availalbe increment in the parapgrah & line spacing selection. Is there a way or a LISP that will allow me to add custom spacing choices to the Line/Paragraph spacing default list?
Then I can upgrade so much and work faster, yet maintain the standard spacing already set via snap grid settings.
I'd like to create a new Menu which will contain few custom tools (ie. place text with particular font type, scale and justification)..I tried to import my customized menu from AutoCAD 2007 but that wasn't successful.
View 2 Replies View RelatedI'm using autocad LT 2010 and need to send the drawings to someone using autocad 2004, how do i save the drawing so they can open and print with 2004. i was told that theres an option under save as but its not coming up on my version.
View 9 Replies View RelatedI have 106 files that I have to save as version 2004 for a contractor. They have been able to open all of the converted files except one. I have run an audit and found nothing. I have purged everything and still no luck.
View 1 Replies View RelatedHow do I transfer 3d polylines from civil 3d 2010 to 2004?
View 2 Replies View RelatedWe previously switched from 2010 to 2012, i transferred our pipe catalog with custom pipes. I though i did it right, but when i started editing pipes that were started in 2010 the pipe sizes were automatically changing to the wrong size after edit.
We are about to upgrade from c3d 2012 to 2013, i don't want this to happen again. proper way to transfer our customized pipe catalog?
C3D 2012, SP1
Win7 - 64bit
I have been using AutoCAD 2006. Our company is switching to AutoCAD 2012 LT. I want to be able to add my custom toolbar buttons from the 2006 to the 2012 LT custom Ribbon Tabs & Panels. I have figured out how to make the custom ribbon, tab and panel. I just haven’t figured out what I need to do to get the old stuff to where I can add them to the panels.
I have custom 2006 buttons with and without flyouts.
We're about to roll out LT 2012 now the SP1 is out, normally I would run round and change the default options by hand (template locations, support file paths etc..) Is there any way I can do this in a macro, or some other way, which means I don't have to go to 100 PC's?
View 1 Replies View Relatedi recently upgraded to 2.8 from 2.6 and i'm having a tough time importing my brushes. i've tried creating a custom folder in the 'brushes' folder and exporting them there. i've tried a simple drag and drop. nothing seems to work. am i missing something or is what i'm trying to do impossible?
View 5 Replies View RelatedI need a macro to auto label, with DIMLINEAR, the lines for Rafters with the lenghts. I have the Dimension Styles set up for each roof pitch, but need a macro to auto label the line instead of clicking each line individually. Also, I can't find a ROUNDUP feature in the Dimension Styles. I've got it to round to the nearest 2' but it won't go up....if it's 11' it goes to 10'...I need it to go to 12'.
View 5 Replies View RelatedIn CorelDraw X3 we had named our custom color tabs for easy cross checking before processing the files. When we bring these files in to X6 it is not holding the same file name that we put in place on X3. This information shows up in the bottom right had corner of your Coreldraw page.
How the custom naming looks in X3
How the custom naming looks in X6
We need the file to tell us the Dates#1 DD1111 as all the information. We have thousands of x3 file that this will affect for checking purposes.
I'm trying to create a macro which will attach a custom sketched symbol with a leader to some specific parts in a view. By modifying some sample code I managed to create a macro which will attach the sketched symbol to the currently selected edge (see code below). However I would like to select the view and let the code cycle trough all the parts and check the filename or a custom iProperty. If the filename has a certain pattern or a specific custom iProperty exists it should add the sketched symbol. I don't really see how I should do this, I can get a reference to the selected view and as far as I can see I can use the referencedfiledescripter to open the assembly and cycle through the occurences. However I don't see how I can use this to add the sketched symbol to the occurence in the drawing view.
' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument ' Set a reference to the active sheet. Dim oActiveSheet As Sheet Set oActiveSheet = oDrawDoc.ActiveSheet ' Set a reference to the drawing curve segment. ' This assumes that a drwaing curve is selected.
[Code] ......
I just got Autocad at home, and looking to take some work home with me over the weekend.
I've noticed when I open a drawing at my home computer, the font styles, dimention styles, etc are not carried over with the drawing.
best way to transfer a drawing to another machine and keep all the included formats, hatches, and everything else in the drawing?
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies View RelatedSo I can run the following code from the command line with no problem:
(WRK-Insert_Standards_Block '("S:\AUTOCAD\_Common\Linetypes\CSW_Civil-Linetype"))
(WRK-Insert_Standards_Block '("S:\AUTOCAD\_Common\Linetypes\CSW_Survey-Linetype"))
(WRK-Layer_Insert_all "CSW-X-FM_Layers_List")
However when I put it into a macro (custom command to be used from the ribbon) it spits out the following in my command line:
(WRK-Insert_Standards_Block '("S:
We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
View 3 Replies View RelatedI need to be able to automatically number pages with a preset. Coreldraw can already do what I need using the PageNumbering macro but I have to enter the individual settings for each template every time. I simply want the included PageNumbering macro but with the option to save 5 presets. If possible I would like the option of saving the presets to a file that can be shared with other workstations so I don't have to manually recreate.
View 5 Replies View RelatedWhere do I place custom textures I have downloaded so I can See them in the materials browser/library?
I can't drag and drop into the materials library through CAD and cannot figure out the folder location in Win7 X64
I have recently upgraded to ver 2012 from ver 2000. I have numerous macros that were written for the older version that I need to utilize in ver 2012. I manually recreated them in the new version by typing in the commands from ver 2000. As I expected I am getting errors when I try to run these macros in Ver 2012. The mlayer command, for example, does not work. I am pretty sure I need to use the -layer command and have tried this but I still get errors. While I am relatively proficient in ver 2000 I am having some trouble finding commands in ver 2012 that match the old version. Below is an example of a macro from ver 2000 as well as my attempt to rewrite it in ver 2012.
^C^C(mlayer "notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
my rewrite:
^C^C(-layer;m;"notes" "cyan" nil) -insert;B6;insert;;;;$S=NUMB0
launch macros much faster than going through the tools menu.
cs_setInnerHtml('video_84cfecff-edd9-427c-acdf-ab8c387c2f0f','');
I am trying to write a macro for a button that when I press, it goes to a certain folder on a server. Normally when you click on the "open" button, it takes you to the last file location. I want that to be ignored an goes to a certain folder.
View 3 Replies View RelatedI recorded a macro that inserts a block in top view. It works good but it takes allways the last inserted block, just like the insert command.
I would like to create a few buttons with macros tha insert a predefined block.
For example: I need a button that, when clicked, inserts 'drawing.dwg' in top view AND exploded.
I'm doing a program in Visual Basic 2010. In one of the forms I put a button that when clicked must open AutoCAD 2012 and make a drawing in it. The user will decide where to save it.The steps are these:
1. I added the references Autodesk.AutoCAD.Interop and Autodesk.AutoCAD.Interop.Common to the Visual Basic Project. That's OK.
2. I wrote this in the heading of the form's
- Imports Autodesk.AutoCAD.Interop
-Imports Autodesk.AutoCAD.Interop.Common
3. In the event Click of the Button1 I put this:
Dim acadApp As New AcadApplication 'Create an instance of an AutoCAD Application
AcadApp.Application.Visible = True 'Show the instance of the AutoCAD Application
Dim acadDoc As AcadDocument 'Create an intance of an AutoCAD Document
acadDoc = acadApp.Documents.Open("C:Respaldo TesisDibujo2.dwg") 'Open a Document called Dibujo 2
'Draw a line
Dim PT1(2) As Double
[code].....
I recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
When I create a new dwg, I use a macro to set all the system variables in the drawing - ltscale, hatch scale, etc. I also use the setq function and define a few new "variables" in the drawing. For instance I use setq to define a variable I call "sf" and set it equal to 72. Everything works great and I do my work and close the drawing. Next time I open the drawing, all my custom variables no longer exist. I have to use redefine them all over again. Is there a way to get these custom variables that I create with setq to stick with the drawing permanently - so I do not have to redefine them every time I close/open the drawing?
View 3 Replies View RelatedHow can I migrate my custom settings from AutoCad LT 2008 to AutoCad LT 2012?
View 9 Replies View Related