One of my co-workers is having trouble with pdfs. He can bring them into the drawing, but they show up as dots, and he cannot see anything else.
When I open the same file, the pdf is there plain as day.
Already re-installed CAD.
I have created a workstation to be used by my cad department, but not able to get it to work. How do I make a multi-user workstation?
View 7 Replies View RelatedAutoCAD MEP 2010
I've used batch plot to make pdf copies of my drawings in version 2004 and did not have this issue:
In 2010 when I use batch plot to pdf (say for 5 drawings), it produces one single pdf file with 5 sheets. I want an individual pdf file for each drawing (5 pdfs).
I don't want to have to open each drawing and plot. That's what batch plot is for!
I am having a problem getting PDFs to plot when I have plot transparency on.
I use the dwg to pdf plot function and with plot transparency on... my hatches work perfectly but my PDFs appears very much screened. (As a 50% or more screen would look) If I turn off the plot transparency, the pdf works perfectly but of course my hatch shades obliterate any line work beneath them.
I was able to convert the PDF to a .tiff, with a graphics program... increase the resolution to 600dpi and use imageattach to bring that in. But it is an extra step for each insert and increased dpi = increased file size.
Other than increasing the resolution on the PDF, any way around this "screening" issue on PDFs when plotting with transparency on?
I have a collection of dxf files that open fine, but the plot preview (and the plot) has extraneous lines in it. Any way to clean up the plot image?
View 1 Replies View RelatedPublishing to PDF as single sheets for insertion into other documents or page managers (such as Indesign) works fine, apart from the fact that it makes crappy work of JPGs should any be embedded in the CAD file. Plotting individually using high quality PDF settings also works but it's difficult with large sets.
Therefore, I would like to publish a tab set to PDF using the plotter named in page setup. However, what this does, is it forces me to pick the file name and locaiton each time, rather than using the one specified in the publish dialog. Is there a way around this? That is, can I make the named plotter behave like the "DWG to PDF" one (that is, name the files automatically)?
If not, can I make the "DWG to PDF" one not compress JPGS?
As to why - I work in a mac environment and everyone draws in Illustrator. I use CAD and many times, for large projects, need this sort of page management. And every once in a while, I need to insert a rendering into a CAD document and then publish.
I'm looking for a field or maybe piece of rtext that can display any pdf's that are showing in a drawing, I've had no luck in finding anything that can do it.
View 4 Replies View RelatedWhat Acad2010 or Trueview 2012 uses to create it's bacth PDF's? We got a new plotter last week and it seems to have corrupted that driver somehow. We are no longer able to create batch PDF in either Acad or Trueview. We using both Win XP and Win 7 machines. I don't know if the plotter had anything to do with this problem it just seem that this happend the same time as we installed the plotter. I can use a 3rd party PDF maker to make individual PDF but this takes time, the batch PDF is much more useful for me. I'm hoping I can get the generic PDF driver that autocad uses and reinstall that, but I don't know what it is or where I can find it.
View 6 Replies View RelatedThis is one issue that I really hate most in the mids of my drawing progress. Why my cursor are suddenly become invissible although it still active? My only option here to make visible again is to save and re-open it .
View 1 Replies View RelatedI work on DWG importer and every now and then I come across some files which behave strange. To take as an example, I am working on a file reported to be having unwanted entities when loaded through our importer. This file when loaded in AutoCAD shows proxy entity and nothing else. When I do "zoom to extents" and select the visible entities by selection window, it shows
Select objects: Specify opposite corner: 5767 found, 1988 groups
Now if I do the selection and say "select: all" instead of using selection window it shows:
Select objects: all
5805 found
9 were on a locked layer.
2 were not in current space.
So apparently there are 38 (5805 - 5767) objects which are either invisible or ignored by AutoCAD when I do "zoom to extents".
1. Is there any way in AutoCAD to make all the objects visible?
2. Why "Zoom to Extents" must be ignoring these objects?
3. What is the meaning of "2 were not in current space."? Does that mean, that the drawing file is simultaneously referring to two Coordinate Systems?
How can I convert drawings on paperspace into PDFs and DWFs with the correct scale? I measured everything on paperspace and it's right; but if I convert them to PDFs and DWFs everything srinks a little and the scale doesn't match at all. What settings or ways to match the scale into what it's suppose to be to convert it to PDFs and DWFs?
View 4 Replies View RelatedI have some blocks with invisible attributes that I use to put information a wiring schedule. How to have those checked in a spell check? I can see that they are misspelled in the table but when I run a spell check it will not fix them.
View 3 Replies View RelatedI am working on my xref file and all of a sudden in my layer properties, all of my layers are missing. It's as if they are still there but invisible, I put my cursor over them and a box comes up with the layer, but I still can not see it or modify it.
View 1 Replies View RelatedI'm using Autocad 2010, and have never had this problem before. Working in plan, the traced linework over 2 xref pdfs (both on locked layers) keeps moving in model space either when I'm performing another command on different linework or when I regen. The layers that keep moving are all locked, and do the same when they're frozen. There is no consistency to where they move--usually within the same screen view--so it makes me wonder whether I xrefed these files into a different plane? They're not georeferenced though.
Or is this just a bug? I thought the file may be corrupted so started a new one, still same issue.
I have a dwg with (dynamic) blocks and when i do a find and replace, it finds ivisbile text that aren't there. i did allready purge, there is no freezed or off layer. even when i copy the whole drawing into another empty dwg it appears.
View 2 Replies View RelatedWhen you clip an something from a file you insert, is there a way not to have the outline that you clip show?
View 1 Replies View RelatedWorking in Autocad 2011, PC version.My drawing has blocks that contain (1) visibible and editable attribute. Also contain (4) invisible and constant attributes. I need to update text information in the (4) invisible attributes. Using BATTMAN seemed the easiest way to do this, but when "Sync" ing the changes, the rotation angle/placement of the Visible attribute changes globally in the drawing.
(Many of the Visible attributes location were adjusted to prevent overlapping with other drawing lines.
How can I update text values of invisible attributes without rotating/adjusting the placement of my visible one?I've tried -attedit & attredef - neither of them did what I needed.
I am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies View RelatedMy boss just came in and wants to get a new workstation with Windows 7 64bit on it. We are, however, out of copies of AutoCAD 2007 to install but have many 2006 copies. Will 2006 run under Win7? If so, how reliably? Or should I suggest getting 2012?
View 7 Replies View RelatedOur company is planning to buy new workstations Dell Precision T1700 [URL] and we have question about compatibility with Inventor 2009: Will there be issues with drivers or directx etc. that don´t match with Inventor 2009 ?
View 5 Replies View RelatedI have tried to load dbconnect on several 64 bit workstations usinf "dbc" and "dbconnect". In all cases AutoCAD Map 3d stops working. Generally, the workstation just spins and you have to end the program with task manager, but I do have on Win 7 machine that crashes all the way out. There is never an AutoCAD error message or opportunity to report the issue to Autodesk.
View 8 Replies View RelatedAfter shelling out a pretty penny for Inventor 2012, my boss set me up with a less-than-adequate off-the-shelf PC. I don't need faster visualizations as I'm not dealing with super complex assemblies, maybe 100-200 parts. I also don't care about ray-tracing while modeling. My problem is it took 24 hours to render a 65 second animation (about 1000 frames).
my boss is going to allow me to build a new, more inventor optimized workstation. I am using studio to do fairly complex animations. Fades, camera changes, constraint animations, all rendered with higher quality. I need a computer that will render quickly, and possibly higher quality if available.
I don't fully understand the whole "Direct X vs OpenGL" stuff. What should I spend my money on, knowing that rendering, not modeling is where I need improvement. I am thinking AMD system to save $$. Also, what to look for, fast bus, cache, etc. Just remember, I need faster RENDERING in STUDIO ANIMATIONS.
I have the following path declared for a R2007 workstation:
(setq rr (strcat "HKEY_CURRENT_USER\Software\Autodesk\AutoCAD\R17.0\ACAD-5001:409\Profiles\" (getvar 'CPROFILE)))
How can I extract this path without manually declaring it?
Something like:
(VL-Get-Registry-Path-Prefix (getvar 'CPROFILE))
Which will result in the following statement:
(setq rr (strcat (VL-Get-Registry-Path-Prefix (getvar 'CPROFILE)) (getvar 'CPROFILE)))
Dyslexia is a permanent physical disability that cannot be seen.
I need to reinstall CS 5 on a new workstation. Where do I find this download file?
View 1 Replies View RelatedMy new Dell U2713H is on its way, and I need a new video card to take advantage of it. I work mainly with Photoshop and Illustrator, with a little bit of Video and 3D. No games whatsoever.
How much video memory do I need? When I look at the Nvidia Quadro series, there's a big jump in price from entry-level to mid-level, but only the mid-level has 2GB. For desktop cards, even some of the lower-end ones have 2GB. Would the extra memory be good for working with image stacks and panorama stitching?
For the more expensive desktop cards, are you mostly paying for enhanced gaming capabilities, or would it be a general overall improvement in performance?
Most of the reviews I see for workstation cards are oriented towards people who do do a lot of 3D. Like I said, I don't do a lot, but I do some. Would something like a Quadro K600 give me a performance boost in Photoshop? Or might I be just as happy with a lower-mid-range desktop card?
I am currently running a quad-care, 4 gigs, with a nvidia 8800gts 640mb graphics card machine and using photoshop cs4 extended with windows xp 32 bit os.
While photoshop cs4 is fairly fast and responsive, I would like to have it even quicker.
My question is, what would make this happen?
Naturally a faster processor (i7 intel) would assist in this, but I rather not go that route. I would rather go to a 64bit OS and add additional 4 gigs of ram (total of 8). What would your suggestions be?
Add the additional 4 gigs of ram and go to 64-bit xp? 64 bit vista?
Build a new machine with i7 quad cpus, 16 gigs of ram and 64 bit os?
Simply use what I got because there will not be much of an improvement?
I would like to have it run faster without a great deal of reworking the system. Clearly what I am running now is pretty darn fast even though it is a year old since I built it.
I have a license for 2013 Ultimate Entertainment Suite. I'm wanting to set up batch rendering on a second workstation. Does this license allow for batch rendering on 2nd workstation while you still design on 1st workstation?
View 2 Replies View RelatedI need to move projects and clips from an old system drive (restored from system crash, unbootable) to a new install on a new disk.
Is there a "best practice" for moving projects?
It looks like this
Disk1 (old)
/usr/discreet/clip/stonefs7/old projects
/usr/discreet/project/old projects
Disk2 (new)
/usr/discreet/clip/stonefs7/
/usr/discreet/project/
I have imported some auto cad files from a software named arcgis 10. The files are opening perfectly. But when I 'am importing the boundary on those files , the scale/size of the boundary is too large. Is there any option in autocad by which we can reduce the scale as per rest of the layers.
View 6 Replies View RelatedWhen I print multiple sheets from IDW to PDF by using the PDFAddIn Translator, the first 9 files are good - the rest have 0KB. Is there any way to correct?
View 3 Replies View Related2010 version in model space scale 1:1, set text height but appears much smaller than rest of drawing
View 6 Replies View Related