I have tried to load dbconnect on several 64 bit workstations usinf "dbc" and "dbconnect". In all cases AutoCAD Map 3d stops working. Generally, the workstation just spins and you have to end the program with task manager, but I do have on Win 7 machine that crashes all the way out. There is never an AutoCAD error message or opportunity to report the issue to Autodesk.
View 8 RepliesRecenlty I used the DBConnect Manager to link template data to a drawing object. Well I think I flubbed because I altered the view that the link template was accessing while AutoCAD was open. Now anytime I use the DBConnect command, whether through the toolbar or ctrl+6, it crashes AutoCAD. If I point the data link to a different database, I can use the DBConnect Manager with no problems. If I recreate the data link, pointing to the original database, it works once or twice and then crashes again.
View 1 Replies View RelatedI currently use Autocad LT 2007 and every time I use the llayer command Auticad crashes.Â
View 4 Replies View Relatedautocad lt 2010 crashes when I hit the enter key.
example: typed UCS in command line then hit enter key and crashes.
I installed update 1 & 2. still crashes.
restarted computer,still crashes.Â
Any thoughts besides unistalling and reinstalling?
My boss just came in and wants to get a new workstation with Windows 7 64bit on it. We are, however, out of copies of AutoCAD 2007 to install but have many 2006 copies. Will 2006 run under Win7? If so, how reliably? Or should I suggest getting 2012?
View 7 Replies View RelatedOur company is planning to buy new workstations Dell Precision T1700 [URL] and we have question about compatibility with Inventor 2009: Will there be issues with drivers or directx etc. that don´t match with Inventor 2009 ?
View 5 Replies View RelatedAfter shelling out a pretty penny for Inventor 2012, my boss set me up with a less-than-adequate off-the-shelf PC. I don't need faster visualizations as I'm not dealing with super complex assemblies, maybe 100-200 parts. I also don't care about ray-tracing while modeling. My problem is it took 24 hours to render a 65 second animation (about 1000 frames).
my boss is going to allow me to build a new, more inventor optimized workstation. I am using studio to do fairly complex animations. Fades, camera changes, constraint animations, all rendered with higher quality. I need a computer that will render quickly, and possibly higher quality if available.
I don't fully understand the whole "Direct X vs OpenGL" stuff. What should I spend my money on, knowing that rendering, not modeling is where I need improvement. I am thinking AMD system to save $$. Also, what to look for, fast bus, cache, etc. Just remember, I need faster RENDERING in STUDIO ANIMATIONS.
I have created a workstation to be used by my cad department, but not able to get it to work. How do I make a multi-user workstation?
View 7 Replies View RelatedStarting a few weeks ago Photoshop CS6 crashes every time when selecting the print command with the error : "Adobe Photoshop CS6 has stopped working" This happens using different printers and when printing anything, including a blank page. Printing works fine from other applications.
Running Photoshop CS6 v.13.1.2 x32 on Windows 7 Professional 64bit
This is a Dell Optiplex 990, I7 3.4GHz, 4GB RAM, 250GB HDD system, AMD ATI RADEON HD 6350 PCIe Video Card on a 16x bus
Â
1) Photoshop has been updated
2) OS has been updated
3) Video drivers have been updated with new ones from the manufacturer
4) I tried new drivers for our Kyocera TaskAlfa 3550ci
5) I tried new drivers for our Kyocera FS-3140MFP
6) I also tried removing all of the printers except "Adobe PDF" printer
Here is an example event from the Windows Application Log after photoshop crashed.
Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86403
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b60
Exception code: 0xc0000374
Fault offset: 0x000c380b
Faulting process id: 0xa0c
Faulting application start time: 0x01ce355706f614ca
Faulting application path: C:Program FilesAdobeAdobe Photoshop CS6Photoshop.exe
[code]....
One of my co-workers is having trouble with pdfs. Â He can bring them into the drawing, but they show up as dots, and he cannot see anything else.
When I open the same file, the pdf is there plain as day.
Already re-installed CAD.
I have the following path declared for a R2007 workstation:
(setq rr (strcat "HKEY_CURRENT_USER\Software\Autodesk\AutoCAD\R17.0\ACAD-5001:409\Profiles\" (getvar 'CPROFILE)))
How can I extract this path without manually declaring it?
Something like:
(VL-Get-Registry-Path-Prefix (getvar 'CPROFILE))
Which will result in the following statement:
(setq rr (strcat (VL-Get-Registry-Path-Prefix (getvar 'CPROFILE)) (getvar 'CPROFILE)))
Dyslexia is a permanent physical disability that cannot be seen.
I need to reinstall CS 5 on a new workstation. Where do I find this download file?
View 1 Replies View RelatedMy new Dell U2713H is on its way, and I need a new video card to take advantage of it. I work mainly with Photoshop and Illustrator, with a little bit of Video and 3D. No games whatsoever.
Â
How much video memory do I need? When I look at the Nvidia Quadro series, there's a big jump in price from entry-level to mid-level, but only the mid-level has 2GB. For desktop cards, even some of the lower-end ones have 2GB. Would the extra memory be good for working with image stacks and panorama stitching?
Â
For the more expensive desktop cards, are you mostly paying for enhanced gaming capabilities, or would it be a general overall improvement in performance?
Â
Most of the reviews I see for workstation cards are oriented towards people who do do a lot of 3D. Like I said, I don't do a lot, but I do some. Would something like a Quadro K600 give me a performance boost in Photoshop? Or might I be just as happy with a lower-mid-range desktop card?
I am currently running a quad-care, 4 gigs, with a nvidia 8800gts 640mb graphics card machine and using photoshop cs4 extended with windows xp 32 bit os.
While photoshop cs4 is fairly fast and responsive, I would like to have it even quicker.
My question is, what would make this happen?
Naturally a faster processor (i7 intel) would assist in this, but I rather not go that route. I would rather go to a 64bit OS and add additional 4 gigs of ram (total of 8). What would your suggestions be?
Add the additional 4 gigs of ram and go to 64-bit xp? 64 bit vista?
Build a new machine with i7 quad cpus, 16 gigs of ram and 64 bit os?
Simply use what I got because there will not be much of an improvement?
I would like to have it run faster without a great deal of reworking the system. Clearly what I am running now is pretty darn fast even though it is a year old since I built it.
I have a license for 2013 Ultimate Entertainment Suite. I'm wanting to set up batch rendering on a second workstation. Does this license allow for batch rendering on 2nd workstation while you still design on 1st workstation?
View 2 Replies View RelatedI need to move projects and clips from an old system drive (restored from system crash, unbootable) to a new install on a new disk.
Is there a "best practice" for moving projects?
It looks like this
Disk1 (old)
/usr/discreet/clip/stonefs7/old projects
/usr/discreet/project/old projects
Disk2 (new)
/usr/discreet/clip/stonefs7/
/usr/discreet/project/
Just installed CS6 on my new workstation and Photoshop; it freezes upon opening.Every other program I have installed has worked flawlessly, including the rest of the CS6 Suite and Lightroom 5.Both Windows and the Adobe Suite have all available updates already installed.Computer is a new HP Z420 Xeon Workstation, Windows 7 Pro 64bit, 16GB Ram.
View 15 Replies View RelatedAutoCad 2011. I am having no luck when trying to drag a command from the Command List pane to the Quick Access Toolbar. I have success draging to Tool Palettes
View 1 Replies View RelatedI am currently writing a series of routines for setting the layers for text, leaders and dimension commands. The end goal is a system where any annotation command sets the correct layer for the duration of the command, then reverts back to the layer that was active before the command.
I have managed to complete all the code, and it appears to be working fine, I just have one question: I have used -layer "m" "Lay_name" etc... for all layer setting commands, rather than any code to see if the layer exists already. In my limited testing this seems to be suitable, nothing that exists on that layer seems to be affected.
I know how to write code to determine if the layer exists already and set the layer instead, but so far it seems unnecessary??
After installing the VBA Module, I get the message "Unknown command "VBARUN"". Â I've rebooted, restarted and tried reinstalling the VBA Module to no avail. Â
View 4 Replies View RelatedI used send command for Export Layout..But the line only executes after exiting command method.
View 9 Replies View RelatedI press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
I need to save a drawing file and give it the name of my desire using a single command, I don't want to issue "saveas" and then specify the name in the file name prompt. This problem is has been faced when I was using ScriptPro and I couldn't succeeded to do that. Hence I need to know if it is feasible to do the stuff using a single command. It will be preferred if I can choose the location to save the file also rather than save the file to the default location.
View 2 Replies View Relatedwithout reiterating a lot of what is said in this thread: [URL] ......
This happen outside the potential malware infection?
if you care to not click-through, the problem is that certain commands (not all of them) simply do not disply in the command line. Â so the MOVE command for example looks like this:
NORMAL:
Command: _move
Select objects:
NOW:
Command:
Select objects:
same with QSAVE and who knows how many others.
line command is a multiple command. there is a way to execute it like a single command?
View 4 Replies View RelatedHow can i use subtract area command in area command while using add command , often it happens we click on polyline whose area we did not want to consider. How can i do like this, i re click on that enclosed polyline and the area gets subtracted and the green fill goes away?
View 3 Replies View RelatedAutoCAD LT crashes without any dialogue box, in a matter of seconds. This has happened to a whole set of drawings. I have purged, audited, recovered all and copied all the drawing documentation into a new drawing file and it still occurs.
View 3 Replies View RelatedI have a file that we have worked on for a long time that has important information in it. When I try to open the file, I get this message. I am running AutoCAD LT 2011. My co-worker with AutoCAD lt 2012 is able to open it. I tried to recover the drawing, to no avail.
AutoCAD LT 2011
AutoCAD Civil 3D 2012
I'm facing an issue when I start up the AUTOCAD 2013 on Windows.
I clicked on Autocad icon, and a message is prompted saying "Unknown Property" with a yellow triangle with an exclamation mark inside it, and the software do not start up.
The highlights: Yesterday the software was working normaly when happened a black out. I started the computer again and keep working without any issue. Today when I would keep working on the project I couldn't start up the Autocad.
Autocad crashes frequenlty. Especially when making a pdf.Â
View 7 Replies View RelatedAutoCAD LT 2013 - Crashes at startup and haven't been able to use at all!
Autocad opens and them it closes itself very quick. It doesn´t give me any error. The program was running ok, until last week. Haven´t make any system changes
I´ve tried to uninstall and them install de program, reinstall :NET framework and still nothing