AutoCAD 2010 :: LAYMGR Doesn't Seem To Do Anything
Aug 28, 2013
I'm trying to merge 2 layers in AutoCAD 2012.When using LAYMGR I can select both layers, the model regenerates but once regerenerated both layers are still present & nothing has changed.
Both layers are unlocked etc & neither are the current layer.I have purged the .dwg, run an audit & also tried with other layers but the same thing happens ie nothing.I've accessed it via FORMAT & via the cmd line, I've tried selcting the layers on the plan as well as the name via the layer table.
I don't seem to get an option to confirm or rename the new layer at all & sure I'm missing something very obvious.
I just got a new Logitech wireless keyboard and mouse (MX 5500 Revolution) and I can not pan with the mouse. I love this wireless set up and it was a birthday present so I dont want to just get rid of it. I have the VX Revolution mouse at the office and have no problems with it.
My company used autocad 2009 and a printing Plug-in which was made by VB,they worked perfect.But when my company uses autocad 2010,the problem rises:The printing Plug-in doesn't work.
Although I downloaded and installed the Microsoft Visual Basic for Applications Module 32bit (from URL....), the printing Plug-in can not work with autocad 2010.the commands from the plug-in cannot be recognized.
Firstly I install autocad 2010,then VBA,next printing Plug-in.Is there anything wrong?
I just got a newer computer and loaded autocad2012. If I use the viewcube to rotate to a front view and try to draw or dimension it only will draw on the "top" or XY coordinates while the screen is showing the xz. If I use the view tool bar and switch to the front view I can draw at will on the "front" and the ucs is showing I am drawing on the xy. How do I get the ucs to follow the view with the view cube like it does with the tool bar?
Now, I have checked the ucs settings ucsortho (1) ucsvp (1) ucsfollow (1) What else am I missing?
If I change view with the viewcube, then type ucs v. It will change the ucs to match the view. Why isn't it doing it automatically?
The file autocad 2010 (dwg) that I've been working for ages doesn't open. It starts loading but then get stuk on 96%. I tried to recover it and no errors are detected.
we are using A2011, Classic workspace (toolbars) and i have partial menus loaded (custom toolbars).
If i try to add a new toolbar to a custom toolbar, or to add buttons to an existing one, the changes are not saved when i close the customization window.
I am difficulty getting the options dialog box to open (under the file menu "red A" dropdown list, options button). When I click on it, all of the buttons on top go gray and nothing appears. When I click on the black workspace, I get a compluter bell sound.
What I've tried to do to solve the problem is restart the computer and shutdown the computer.
Whenever I create a new layer in the Layer Manager, and I set the color, the color reverts back to whatever it defaulted to when I created the new layer - usually the color of that layer that is current, since everything is just duplicated.
To fix it I have to go back into Layer Manager and set the color a second time.
Civil 3D 2012 Win7 64 bit Capable Dell Precision everything up to date
Dell Precision 7core 8GB RAM NVIDIA Quadro FX 1800M
When I first started, I noticed that EVERY time I started Acad (Civil 3d 2012 or Arch 2012), the MRU list showed nothing but DST files. If I opened a dwg, it would get added to the top of the MRU list. But then the next time I loaded acad, there would once again be no dwg files--just dst files.
I thought that maybe the profile where the MRU list is stored was being overwritten by a backup (maybe the mgmt here wanted to ensure the profile remained "standard"). But then I noticed that when I open a dst file that was not on the MRU list, it gets added to the MRU list and STAYS THERE when I close the Acad session and is still there the next time I start Acad.
Now the difference between my issue and the other thread (at least as far as I can tell), is that I think they're saying that as dst files are opened, the dwg file(s) get pushed out of the list. But most of the dst files I'm seeing in the list are there from before I started.
How to get the all the materials back in the materials palette?When I switch to 3D Modeling and go into the Render Tab in the Materials section, I do not have any materials loaded.
I have a 3d drawing file which I manually flattened except the section. The ground plan is at 0 Z axis.
Now I am trying to draw lines on top of it, and I cannot extend my lines. Any solution to this?
Additional question:
I also had some difficulties when I was trying to flatten the 3d model. "Flatten" command did not work. I understand Flatshot did not work because these are not solids. But why Flatten did not work? That was why I had to manually change start and end of z position.
I have a user that when he draws the first line he does not see it until the second line or other action is taken. Photoshop is similar to this when drawing lines. Is there a setting to change that in the command line?
I'm working on 2010, and I can't get the PURGE dialogue box to show up when using the PU shortcut. It will open if I type out PURGE completely, but when I type in PU, stuff just shows up in the command prompt. I even went into the alias-editor and made sure PU = PURGE. I've never had this issue before, but I'm on a new system because I started a new job. At my last job, we were also using 2010, and everything was fine.
When I try to create a new font style using the standard Autodesk Swiss fonts, I get the message "font file doesn't exist". I can see that the fonts are in the AutoCAD fonts folder and that I have a file path set to that folder.
I'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast!
Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!
Publish comment doesn't work correct. Even if I set multi-sheet file and prompt for name, autocad doesn't ask me about file name and makes single sheet files.
I have some mulitleaders in paperspace that lost their associativity with objects in model space. _dimreassociate will work with to reattach a leader arrowhead to a model object but the command doesn't work with multileaders. Is there another way to do this or do I have to redraw the multileaders?
i have problem with pan function, it doesn't work on scroll button, i have windows 7 (64 bit), microsoft wireless mobile mouse 4000 and autocad 2011, i have downloaded new software for mouse and changed wheel button to middle click and i have changed mbuttonpan to 1 in autocad, still not working.
I need to print this drawing and I cannot get either print to PDF or print to printer working properly.
I was asked to create a local area map of the site and i used a google map image as the map. I have a paper space layout with labels and the company title block, with a raster image reference in the model space viewport, when I go to print this drawing using plot PDF the image comes out so grainy it's useless. When I plot to printer the paper space layout comes out great but only a slice of the raster image is printed.
No indication of problems can be seen in autocad's preview mode, and this doesn't happen outside of Autocad- I can open the image and have it print to PDF clearly, and I can open the image and print to printer without problems.
Here's a link that explains what the printer is doing: [URL] .......
The image is supposed to fill the whole viewport, but most of the viewport is blank.
This drawing file doesnt allow copy to clipboard or even binding on to other drawing. It was originally sent to us from another company, I have deleted all the objects and layers, purged it. If I create a new line or other object, Ctrl+C doesnt work.
Quick dimensioning a number of blocks doesn't work. Is there a way to do this without exploding the blocks.
For example I have 10 blocks at various intervals and I want to pick up the centre line position of each block to show the dims between each block centre.
I am having an issue with saving the merge control variable to "Lines Merge" under the Sheet Set Publish Options. I have full rights to the sheet set file, and can change the variable to make a plot, but it gets reset everytime I close program and reopen.
I type in the command ( I'm an old school typer, hate the buttons ) BLOCK....then the next thing that happens is (after hitting enter of course), my crosshairs instantly turn into the Windows arrow.
I wasn't playing with any switches. I was just trying to make a little block with a number in it.
Yes, I restarted AutoCAD, restarted the computer, did not reload in AutoCAD.....AutoCAD 2011 by the way.
I run Windows 7 Home Premium 64bit.
I have to do a WBLOCK to make the blocks I need to bypass this odd behavior.
i did the test with a qleader and everything seem to be functional but mealder have an issue where autodesk have to check this
example: i have a layer called test1 with color green i have a meleader with a Dot as an arrowhead when i go to the viewport and change the vport color to red
well everything changes expt the arrowhead which will take the layer color (green) but if i go to properties and i change the arrow head to closedfilled then it will take the vport color (wierd) i did the test with autocad 2008 to 2012 all the same problem
