AutoCAD 2010 :: How To Overlay(Add) DXF File On Existing Dxf
Oct 8, 2012
I am a GIS person and not familiar too much with AutoCAD. As you may know we can easily overlay GIS fles in GIS software as much as we would like to have , while having same coordinate system.Now my question is , Is it possible to overlay( Or Open, Add, Insert,..) a dgf file into an exiting one?
For Example, I have received 4 dxf file which they have all same units and coordinate for Pit Design and I just want to have all of them in one dxf. How I can merge them? I saw a hint on web for Copy Base Point but it was too complicated.
View 1 Replies
ADVERTISEMENT
Jun 6, 2013
I installed AutoCAD on my pc with windows 7 and to complete the installation I had to change the registry file EULA from 0 to 1. Now it works but when I try to open an existing file it crashes.
View 1 Replies
View Related
Jul 29, 2012
Is there a method to import Layers from existing DWG file to another? I want to import all layers with their names.
View 3 Replies
View Related
May 26, 2011
I need to create a new block based on a existing block(need the same shape), then overlay on top of the existing one.
1. create a new block based on the existing one. the existing block is solid but I need to give pattern to new one
2. overlay on top of the existing one
I new how to create a block generally, but doesn't know how to create based on an existing one.
View 1 Replies
View Related
May 23, 2012
how to remove following message which appears when i open new / file existing file. This also changes my settings and autocad does not work properly.
View 4 Replies
View Related
Dec 25, 2013
I have autocad 2010 installed on dell n5537, i5, windows 8, 64 bit,.. whenever i open an existing cad file,.. it gives strange lines emerging,... as shown in the screenshots attached, most of the times they emerge from the corners,..
these lines hide n show, when i pan/zoom or move the dwg .
View 4 Replies
View Related
May 26, 2011
How do I create a new CTB file OR insure that a drawing is supported by an existing CTB file? I have tried to start one from scratch using Plot window - when I click on file - it sends me back to MY DOCUMENTS. Is this a glich??
View 9 Replies
View Related
Oct 31, 2012
I inserted a dwg created with Autocad LT 2004 into a MS Word 2010 document using: Insert | Object | Create from file. The result is the desired drawing is inserted but, in addition, the template used to create the dwg is also included and visible as if it is an additional layer. How to keep this from happening?
View 4 Replies
View Related
Apr 3, 2012
Is there a way to overlay a transparent background png image on a solid or mesh that already has a material assigned? i.e. a chrome object with a decal applied. I have tried creating a new material using my png file as the image but have not been able to overlay it on an object where I want to see the material underneath.
View 1 Replies
View Related
Jul 8, 2013
I'm on a help desk where we have several users who run Win7, but can't publish any projects that have a TIFF overlay. Let me correct that. It prints, but that TIFF overlay is not included.
They print to a Xerox 6204 Wide Format printer, and every single Win7 user has this problem (32 and 64 bit). The one person that still runs XP doesn't have this problem. This sounds like a driver problem to me, but we've reinstalled the drivers and still no change.
View 1 Replies
View Related
Jul 15, 2012
How can you use a template file from your personal files to use it in an already existing .dwg file.
I knwo how to do it if I start the drawing from scratch and I select that template, but I want to put this existing drawing into my personal template file from my documents.
View 2 Replies
View Related
Aug 24, 2012
I am trying to insert a AutoCad file as a Overlay into Factory.
The problem I'm having is the text in the Autocad file scales up and becomes a thick font.....I can't see or use the geometry under the text (text becomes a thick wall above with the geometry below.
The text seems to have a life of it's own..otherwise the geometry is fine. I know there are layer settings that can be turned on/off within factory.
I created a new file and stripped out the text from the AutoCad file to be able to use in Factory.
View 1 Replies
View Related
Mar 24, 2012
I'm attempting to create a table within autocad that I can update as I add new things to my drawing.
I have a ton of dblocks that carry attributes with them, and I want to be able to have the table in autocad populate with the information from each insertion.
The table in autocad will be linked to an excel spreadsheet that should also be updated (either as a separate action or automatically... not sure what would be better).
The table in excel will go through a system of formula that will divide it up into useable groups for me. How do I update a table within Autocad, instead of having to create a new table every time I want to add data to the extraction information?
View 1 Replies
View Related
Feb 3, 2012
I have an exisitng attribute that have several line items. I want to add more items to this attribute same attribute. The attribute block name is "JLR24X36" and there are 15 existing tags within this attribute?
View 3 Replies
View Related
Jan 14, 2013
I'm very new to Civil 3D.I've been given original topography in a .dwg file and a .csv file of the same topography after some dirt work.My problem is when I import the .csv file the points don't overlay the original topography.
What I have done is added the .csv points to the original topography .dwg with the "Points From File" option.
View 6 Replies
View Related
Aug 3, 2012
How do I create a new pointer using two existing pointers. I would like to create a pointer that combines the default arrow and the integral.
View 9 Replies
View Related
Apr 4, 2012
I have a venue drawing that is in mm and I need to convert it to ft/inch so I can update and get dimensions from it. Can this be done so when I change the format in drawing units it will update the drawing units?
Current settings.
Drawing units
Length:
Type - Decimal
Percisin - 0
Angle:
Type - Decimal Degrees
Precision - 0
Insertion Scale:
Unitless
View 4 Replies
View Related
Feb 24, 2012
How to convert the “existing” hatch from one measurement to another?
In the screenshot below, the first hatch is drawn with “measurement” = 1 (metric), while the second is drawn when the measurement = 0 (imperial). The “measurement” value is not a property for the hatch!
Then how to convert the hatch that already exist and drawn with the “measurement” = 0 to the “measurement” = 1.
In other words, how to switch all the hatches in a particular plan from being “imperial” based (measurement = 0) to “metric” (measurement = 1)?
Is there a way to do that? Or should we delete the existing hatches and re-draw them with the required setting (metric/imperial)?
View 3 Replies
View Related
Jul 3, 2013
I have been sent a DWG floor plan from a firm in South America. The existing file is Type: Decimal and Units to scale: Meters. We need to convert the file to a useable architectural and feet set up. I know that I will need to scale the existing dwg however I am not sure what the exact steps are or what I should scale it by. Should I change the drawing units first and then scale? Or the other way around? Biggest thing I need is the scale factor.
View 9 Replies
View Related
Oct 11, 2012
I have an existing drawing with numerous viewports. I would like to know if there is a way to link those existing viewports to the set as "sheet views" without having to delete them and re-create them using the normal sheet set process.
I've noticed that each viewport has a variable in its properties display called "link to sheet view" with a yes or no entry, but it doesn't seem changable.
Is this possible, or must I re-create them from scratch?
View 3 Replies
View Related
Apr 24, 2012
I'm attempting to create a sheet set from existing drawings, but when I point the "New Sheet Set Wizard" to the folder containing my 8 or so drawings (with 24 or so associated layouts), only 2 drawings appear with 6 associated layouts for import. The other layouts don't even show up as being part of another sheet set. How do I get the New Sheet Set Wizard to "see" the layouts?
View 4 Replies
View Related
Jan 23, 2013
I have a problem with Dimension association to any existing object in my drawings. If i draw anything new in the same drawing this problem does not occur. The leaders are also associating themselevs to these objects.
When i select a line, no grips appear even though if i draw a new line they do.
-I have tried to use DIMDISASSOCIATE the dimensions from the objsect to no avail.
-I have tried changing the DIMASSOC variable but this didnt work.
-I have tried exporting the objects to new files but still the same problem, only with the objects from this drawing.
It seems to have made every object associative. The only thing i can think that caused this was i pasted in a drawing from a pre 2002 Autocad version.
View 9 Replies
View Related
Feb 13, 2013
As often done in mechanical drawings, a circle is drawn around a detail in the main drawing, and the detail is displayed somewhere else on the drawing on a larger scale.
My detail is the small rectangle in the upper right corner of the larger rectangle. I have also drawn a dash-dot-dot circle object around that corner to designate the detail-area.
In layout 1 the top left viewport displays the "whole" drawing. I also created a circular viewport to display the detail on a larger scale.
In the circular viewport, I used zoom-to-object (and selected the dash-dot-dot circle). The result is visible :both circles (object & viewport) are still visible, and they are not concentric too.
I thought the zoom command would have zoomed until both circles overlapped eachother and were concentric...
View 1 Replies
View Related
Dec 22, 2012
I have a slightly unusual query that I can't seem to find a solution for elsewhere. I have an existing OS plan that is 'off grid', and would like to adjust the vertices at the ends of all the existing lines and polylines so that they all sit on a grid point. Is there a quick command or script that does this?
View 2 Replies
View Related
Oct 25, 2012
I've wrriten a script that will create custom annotative scales and a new text style. (It works fine up to that point) The next steps I'm trying to add to the script is to select a text object, set it to the new style, make it annotative and add all of the annotative scales to that text object. CHPROP allows me to make the text object annotaive but I haven't found a command that will let me change the style or add annotative scales to the text object. Any commands I can use in a script to do this ? (or know if this is even possible)? I have 2000+ drawings I need to run this one, I hope I can find the commands to script this with.
View 2 Replies
View Related
Apr 19, 2012
change my existing customize classic toolbar to be ribbon type.. Though want to try out the ribbon type format with my current customize toolbar.
View 1 Replies
View Related
May 10, 2012
I want to convert existing lighting blocks with attributes to a new dynamic block. I created a few visibility states but when i insert the block I can't move the attribute text around. I don't have to redefine the attributes within the block editor to make this work. What is the best way to deal with existing blocks with attributes?
View 4 Replies
View Related
Apr 11, 2013
I have a block that has been already established. i added another line of attribute. how do i make the new attribute associate with the 'move' parameter that has been set with the old attributes?
All this is created in block editor.
View 2 Replies
View Related
Jun 16, 2011
I have several existing block definitions and need to change the insertion point. Also, when creating a new block in the Block Editor, how do I define the insertion point?
View 9 Replies
View Related
Jul 26, 2010
I've created a new sheet set with some existing drawing files. These files have several layout tabs in each drawing. The Sheet Set Manager (SSM) seems to import the layout tabs in random order, not in the order they appear on the drawing, nor in alphabetical or numerical order. In addition, the SSM imports and numbers all of my drawings in reverse order. Any system variable setting, or some other property setting somewhere that will change this back to ascending order?
View 7 Replies
View Related
Nov 18, 2012
I did a search around, and did not find the answer. Basically I have attempted to create an action in Photoshop CS6 which will save a file in the tiff format after i crop the image. I want the file name to be the name of the image (which is supposed to change depending on name of the image) like this:
1280x720_MGXXX.tiff, where, in my case the XXX represents DIFFERENT NUMBERS.
I want to apply the action to one image at a time. Each image has a different number (name). I record the action, add the 1280x720 text to the image name in the Save dialog. I am saving the image in a different folder from the source file. The source file name is _MGXXXX.tiff (again XXXX is a number like 2220...).
When I run the action on a file, say "_MG2221.tiff" it adds the 1280x720, and saves the file. When I apply the action on the next file (_MG2222.tif), the action overwrites the existing file, 1280x720_MG2221.tif, with the image. The action always uses the name I entered in the Save dialog!! I think I was able to do this in CS4 and CS5.
I want to be able to open a file, crop and adjust it, and then save in a diff location with 1280x720 pretended to the file name.
View 2 Replies
View Related
