I have a problem with lines that begin and end outside the Z is zero, and polylines with elevation outside the Z zero. The difference is very small, for example, -0.00000112, or 0.00000078. I checked the possibility of using the Flatten command but does not always work, even though there hatches in the drawing. Polylines and Blocks also cause problems with the command by flatten.
View 7 Replies
How can I fixing ( for example) attachment DWG contains too many elevation levels for ( Lines, Dim, Text & Layers) quickly, from all elevation levels into zero elevation level.
To explain more : When I am looking on top view it's good plan, but when I am looking on other Isometric view it's shown many levels . I need to fix every things quickly to zero level ?
I am trying to create a block with 1 attribute (ELEVATION) showing a finished floor level and another text (field) to show another level derived by the sum of the attribute value + and additional (fixed) number, say 100.
I have tried using fields inside an ATTRIBUTE or a simple DTEXT but the field does not update, it only picks up the DEFAULT of the attribute, not the user entered input. How can I do this?
attached is the block
I'm using the FILTER command to do this. I've added elevations 410, 420, 430, ect to the list, with a ** Begin AND at the start of the list, and a ** end AND at the end. Nothing gets selected.
Civil 3D 2013
Windows 7 64-bit
Xeon W3550 3.07 GHz
Nvidia Quadro 4000
12.0 GB RAM
I'm using the exporttoautocad command to convert a 3D drawing with a proposed surface (a TIN object) into a drawing with just contours (polylines with elevations). My original drawing is in feet and has a NAD83 state plane coordinate system.
Everything seems great in the exported dwg, except it is converting the elevation units from feet to inches!? A contour that was originally at an elevation of 7.0 feet, ends up at 7 inches in the exported drawing. Spatial coordinates are preserved.
I am working on an electrical plan and am having some issues setting the elevations on the lighting blocks that I inserted into the drawing. When I select all the lights at once to set the elevation (or Position Z, as there is no elevation option) to 14', they all go to different heights. I need them all to go to 14', which is the ceiling height. The lights that are recessed need to have the bottom at 14' and the lights that hang need to have the top at 14'.
Attached is the file for reference.
Is there a setting I can change so if I am drawing an object (line, polyline, etc.) if I am snapping to a contour line, the objects will NOT take on the elevation of the contour line?
View 3 Replies View RelatedI am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies View RelatedWhen I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies View RelatedI have a drawing of Polyline. The elevation of Polyline's are set different. But I don't need the elevation. So I change the elevation to 0. But after making it 0 all the polylines are scattered. How will I make the elevation to 0 not hampering the polylines.
View 6 Replies View RelatedI have created a surface from contours for a tank containment area. I need the volume up to a certain elevation. The results i am getting have some fill volume and some cut volume..
View 7 Replies View RelatedHow to default Z into 0 elevation? I am editing drawing, everytime I am creating object I cannot fillet because its not coplanar. i have to flatten them.
View 3 Replies View RelatedWhat I am having trouble with is that I need to get a true elevation. When you use the scroll wheel the model moves away from a true elevation, either above or below ground level. I need the tru elevation to create 2D sections using flatshot.
View 2 Replies View RelatedThis might be simple, but what is the best way to hatch a part of a surface at say RL4.00 only so that any part of the surface below RL4.00 is hatched and the rest of the surface is not.
View 2 Replies View RelatedJust a follow up to the inquiry on the Flatten command. Is there a way to use set all entities in a drawing to elevation 0? like moving them all to Z=0 like the flatten command but all entities in one command including blocks, hatches, etc.
View 9 Replies View RelatedI used the Volume dashboard to cal volume so when I view the surface in object viewer or 3D I see my TIN volumes surface at zero elevation is this right? I think the reason is because they want us to see both surface so they are not on top of one to another.
View 5 Replies View RelatedIts been a while since I have needed to change the elevation of a object. The problem is that does not list the elevaation in the Properties manager on my quick access tool bar or in QP window. I have used it in the past but now its gone. I an using AutoCAD 2011. Ive tried to use the CUI to find it but no luck.
View 5 Replies View Relatedmake a drawing to be flattened and set to elevation zero.
I do have the flatten command from express tools, and that works only to make everything to 2d, but i need a simple script routine to set all objects to elevation zero.
This is my current methodology
1. select objects
2. flatten
3. select same objects
4. explode
5. select same objects
6. explode
7. select same objects again
8. In property's, adjust Z axis to 0.
I fear that this is too long and bulky, and sometimes it wont work.
I also fear that any lisps routines are completely out of my league as i never used them before and my company never really had a need for them, but i am willing to give them a shot if it means that they will save me some time.
I am trying to make a autoamtic elevevation as attached. but still no luck, i dont know how to do it.
View 6 Replies View RelatedAny way to label the elevation of an object where it is picked? For example, I'd like to be able to pick on the node of a feature line or 3D polyline (or any object really) and have a label placed that displays the elevation of the object at the point where it was picked. This could appear similar to the surface spot elevation label, but instead of getting it's elevation from a surface, it would come from the object where picked.
Alternatively, any way to create a label style, perhaps using the Note label, to display something like this? I don't even care if it is dynamic or not, static would be fine. However, I do need it to scale innovatively . Tool Pac has a feature that does this, but the label is just a polyline and text that is not annotative.
ACA2011
So I've got a Construct that is the building model. I also have a View file for my 2D extracted elevations. I've just 'Refreshed' one of the elvations based on some updates I did to the construct model. But when the 2D elevation refreshed, it's surface hatching (roof tiles) scaled itself down considerably. What controls this? I need to have that hatching scale back up and don't know how.
I turned the visibility of Elevation & Offset label off. How do I get it back. Not all just one spot.
View 1 Replies View RelatedIs their a way to create a spot elevation in AutoCAD LT 2013?
View 1 Replies View RelatedIn the good old days I would create 3d polylines by elevation to create curb lines and driveway cuts. The command was in the terrain pull down. Has this feature been completely down away with?
View 3 Replies View RelatedSuperelevation curve criteria specifies axis of rotation but the assembly does not contain pivots.
okay i got this Before , just when i wanted to change in the Super Elevation Wizard , to outside lane rotation , i recently used AOR type , but yet no luck. also in my profile the super elevation the Cross slop Band : i always no matter what a rotation about center line.
I have a surface profile 1 and a corresponding water level profile 1 of a flood plain. Now I get an updated surface profile 2 and the engineer ask me to ajust the water level according to the difference of surface level 1 and 2.
How can I add a irregular distance (water depth) to surface profile 1?
I conducted 2 surveys on different days and somehow the second survey was off by exactly 0.9 (don't ask because I do not know). With the temperatures being -10C with a very high windchill. I said I would worry about it after the fact once I put it into CAD.
So I am on to Civil3D 2014. I imported the 2 .FBK files and was wondering how to do an elevation drop of 0.900m for just the one survey quickly.
In regular conditions de elevation of every object that I creat is Z= 0
Lines starting and ending points are at this level, circle centers -and circles as objects- polylines etc.
How is possible to setup a different elevation for my objects?
Second case: Just in case I rotate my UCS and having my drawing doing all my objects in the plane X-Z therefore my coordinate Y as default for every object, could I set up the Y coordinate as required?
I'm getting a zero elevation for the surface I create when I compare surfaces to get volumes. What am I missing?
View 9 Replies View RelatedI have a surface with a bunch of contours. I want to view the contours at elevation 550. In Microstation there is a set display depth command. Is there a tool in autocad where I can view certain elevations.
I want to make layouts/viewports that are clipped to different elevations. For example I have a surface with 5' contours. I want to create multiple viewports on a sheet showing what each contour looks like at its elevation.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
