I am trying to design a barrel cam. This works well with lofting, but I am not so sure about the mathematical accuracy. I am used to making cams like this with 1/4 degrees resolution - much too cumbersome in lofting. Is there a way with "_sweep" to constrain the profile (2d polyline) so that it stays e.g. parallel with the Z-axis?
View 4 RepliesCan I draw mathematical equations in Inventor drawing? I am using the stacking functionality but that fails when I need to include symbols such as greek characters.
I do not have to draw fancy equations just the simple fractions but I need the greek characters to appear.
Using Mathcad, I can create a file with x and y values defining a 2D shape from which I want to create a swept volume.
I want to import these values into Inventor to use as a definition of a sketched line and then use the revolve function to generate the shape.
What the best way to draw multiple parallel pipes that cross a corridor. In my example I have a track with 4 pipes crossing the track corridor on slightly different alignments (from perpendicular to skewed). I have drawn the pipes on as individual pipes under the same network.
However I cannot get them all to display on the profile. I have tried "Draw Parts in Profile" but it seems to bring up only 1 pipe. managing multiple pipes.
Is there any way to set the drawing accuracy in INV2013.
Like not to calculate the points more than 3 decimals.
How to set the mass calculation accuracy to 'Very High' when doing calculations in iLogic.
I asked for the iLogic equivalent to the VBA term:
' Set the accuracy to VeryHigh.
oMassProps.Accuracy = k_VeryHigh
and was provided with:
oMassProps.Accuracy = 24580 'k_VeryHigh=24580
However, I believe that the value 24580 is actually equivalent to k_Medium. Confirm the iLogic equivalent value of k_VeryHigh.
Original post: [URL].......
Our company is currently looking at a large upgrade from AC LT to Product design suite and Building design suite. My question is, will the following setup support it? If not, what's needed? We're at a crossroads and need to capitalize on the current software sales.
Our current setup:
yanWorkstation Motherboard, AMD 3ghz processor, 8gb ram, 2tb mirrored storage, 500watt PSU,
DVD, Antec 300 Chassis
Microsoft Windows Server 2008 R2 Standard W/SP1 5 CALs 1 Server (1-4 CPU) OEM DVD 64-BIT
when i pick design center from the ribbon nothing happens. Even if i type in adcenter nothing happens.
View 2 Replies View RelatedFor a project, I'm needing the mathematical equations/formulas/matrices of a vector. Vectors are all essentially mathematical... thingies so is there some way that I can get the mathematical calculations that are used to make up a vector object in Illustrator? Or any third party program or script that can pull these formulas for me?
View 13 Replies View RelatedAny way to transform/rubbersheet a photo/raster so it sticks to a wall i.e. vertically and not just doing it 2D. Trying to digitise photo's taken of walls to work in a 3d model.
View 3 Replies View RelatedI am wondering if there is a way for the images of blocks in the Design Center viewing window to be bigger. Its hard to see what all is in the block.
View 2 Replies View RelatedWe have both 2012 and 2013 AutoCAD at work, and both versions are having the same problem. When adding favorites in Design Center, it does not show up. The shortcut is actually there if I browse using Windows Explorer, but it does not show up in Design Center. I guess this is some issue where shortcuts do not show up, which is beyond me because that is how the Favorites system is supposed to work.
I should add, this is not an issue on some of our older machines running AutoCAD 2009.
how do i import from the design center into my project
View 1 Replies View RelatedI am trying to bring in a block from the design center and some of the parts that were created as the block are not showing up. If there is a layer setting or another setting in the drawing that I am missing?
View 3 Replies View RelatedI've has Inventor tell me this for thin walled tubes with holes in them, but not for a simple part like the attached one. Autodesk are you listening yet? This has been an issue for a long time. Mass calculations for parts with holes on curves do not work properly. On many parts the error comes up with "low" selected. By default each time I try to save the file, the error window pops up.
View 8 Replies View Relatedit's possible to create a barrel vault skylight that would work similar to a curtain wall (i.e. stretch the skylight and it adjusts to a fixed size and adds mullions)?
View 1 Replies View RelatedI have a drawing with 3 table styles I've saved that I can usually insert into my drawings using design center when I need them. Normally all three come in fine, occasionally only two will come in. I have a drawing that I am trying to insert my table styles into and none of them are inserting! I don't know if there's a setting preventing this command or what.
View 1 Replies View RelatedMy design center has the content of my entire computer on it. How do I adjust it so that only the general blocks are present on there, such as doors, plants, etc.?
View 2 Replies View RelatedWorking in Autocad 2010, needed to insert my title block into my design, I know how to insert, but I can't get design to work in the middle of title block.
View 3 Replies View RelatedIs there a way to permanently attach a raster to a .dwg? I want to publish a large set of drawings on our Intranet and some have rasters attached.
I don't need to worry about links to references and how to post them so as not to break the link.
I'm using CorelDraw 12 to make mathematical drawings. Triangles, circles, tangent lines, perpendicular lines, etc... and that works really fine
But... I'm having a hard time entering mathematical equations, especially when using a lot of fractions and square-root-signs. Is there an "easy" way to do that?
I want to construct some mathematical and scientific equations in Ai. Where I can get the necessary fonts that will work in Ai?
View 4 Replies View Related I work a lot with Processing to create picture based on mathematical formula, but i need to do the same in Illustrator in order to print those picture.
Is there any way to do this, like the expressions in After Effects, or a third party plugins.
Or did i have to find a way to output good picture from Processing.
I have a problem with autocad 12 when i write command DC "design center" it don't work correct it show me the box but don't expand any drive to select !
View 2 Replies View Relatedi just bought a new wide-angle camera, and there's this common issue that occurs in all wide-angle lens - whenever i take portrait/group shots, people who stand at the edges always have VERY "flat" faces.
View 9 Replies View Relatedtook a couple of photos using a wide angle lens.
Now I need to get rid of some barrel distortion.
How would I go about doing that?
On most photos its the horizon that's disorted.
Have a look at the attached photos.
if PS itself has functions for correcting the distortion.
I need to add barrel distortion to a 3ds max camera.
using 2014
I been trying to make a deployment of Autodesk Building Design Suite Premiun 2012 from
a pc with XP 32 Bit, XP 64 Bit, and Windows 7 64 Bit and the aplicaciton stars well but then after a couple minutes. I got this error.
Cannot create deployment - "The copy functions cannot be used D:x86RAC2012
I have an RX100 and am an avid Paint Shop Pro X5 fan. However, I have had no real success in shooting in RAW format. The reason is because of the awful barrel distortion on the RX100, so that it can achieve its level of compactness.
I want to be able to take RAW pictures, use the RAW lab for white balance, highlight recovery,etc, while dealing with the barrel distortion in an easy manner.
PSPx5 supports the .ARW format, and that I don't have to convert to DNG, I don't know what to do about the barrel distortion. It is possible I suppose to perform a barrel distortion correction individually on every single photo I take, but this seems overly labor intensive.
A script to automagically do this on all images is probably possible...HOWEVER, the distortion depends on the amount of zoom applied, from around 3.9% wide-angle to about 0.5% at the long end. So a batchfile process isn't really appropriate.
Sony has an Image Data Converter. But, when I tried to use it, it did not save any of the barrel distortion corrections back to RAW! Otherwise I could use it as a batch converter, then use PSPx5 like normal.
I have just finished my design and I wanted to insert a title block and annotations with pictures using the paperspace option. I want to print the design out onto A1 Paper (80000mm x 56000mm) to a 1:100 scale.
What I want to know is what is the dashed line, how do I make the paperspace A1 size and a 1:100 scale, as well as wanting to know how to make the title block and add annotations to the design.
One problem I am facing is that any line I do create comes out bold as well as when I zoom into the drawing itself every line is bold. Why is this?
Working in AutoCAD LT 2010.
Drawing format 2007 or 2010
bedit, OK if you regenall after
refedit, Ok if you regenall ofter
design Center - display order goes out the window. The inserted block is redefined but the rest of the drawing loses all its display order. sortents (127, 33, 51, etc) and displayorderctl does nothing, either before or after the block is redefined. hatches and blocks just jump to the front (display order shows as order of drawn not order as moved to) Regenall does nothing.
absolute nightmare with display order managed elevations (solid hatch, baconies, windows, multple buildings, all overlaying!!)