Can I draw mathematical equations in Inventor drawing? I am using the stacking functionality but that fails when I need to include symbols such as greek characters.
I do not have to draw fancy equations just the simple fractions but I need the greek characters to appear.
I'm using CorelDraw 12 to make mathematical drawings. Triangles, circles, tangent lines, perpendicular lines, etc... and that works really fine
But... I'm having a hard time entering mathematical equations, especially when using a lot of fractions and square-root-signs. Is there an "easy" way to do that?
I want to construct some mathematical and scientific equations in Ai. Where I can get the necessary fonts that will work in Ai?
View 4 Replies View RelatedUsing Mathcad, I can create a file with x and y values defining a 2D shape from which I want to create a swept volume.
I want to import these values into Inventor to use as a definition of a sketched line and then use the revolve function to generate the shape.
Inventor 2012
Can equations like this cell equals this cell be used in the Ipart or Iassembly family tables?
I am trying to design a barrel cam. This works well with lofting, but I am not so sure about the mathematical accuracy. I am used to making cams like this with 1/4 degrees resolution - much too cumbersome in lofting. Is there a way with "_sweep" to constrain the profile (2d polyline) so that it stays e.g. parallel with the Z-axis?
View 4 Replies View RelatedI am using Civil 3D 2009 version 4.
I have designed a railroad yard that the construction plans require all grading to be to centerline of rail (0.5 feet under the ties) and my profiles are required to be to the top of rail (1.3 feet above the centerline elevation). Since I already have the grading surface done I was hoping there was a way to target my grading surface and add the 1.3 feet to the elevation in the label. Is that passable?
Using the stock 'Elevations and Stations' style I targeted the existing ground for profile 1 and the finished ground for profile 2. Then I tried using the language you enter at the command line to do math in the label (+ 1.3 <[Profile2 Elevation(Uft|P2|RN|AP|Sn|OF)]>) but that only generated a label that read "(+ 1.3 242.00)" instead of the "243.30" that I need for the loading area, for example.
AutoCAD Civil 3D 2012 (Primary), 2011 by contract.
Dell Percision T3500: MS Windows 7 64-bit SP1; Intel Xeon CPU W3505 @ 2.53GHz, 12.00 GB RAM, NVIDIA Quadro 600
This is using Civil 3D 2012 Service Pack 2.1
When a Station Equation is added to an alignment it causes all of the profile views to get messed up. In addition once the EG profile changes the entire FG profile may also need to be changed. See this video I uploaded to Youtube that fully explains and shows the problem: [URL] ........
So, any way to some how lock the profile views start and end stations? Or to some how lock the PVI locations on a a proposed profile to certain stations?
For a project, I'm needing the mathematical equations/formulas/matrices of a vector. Vectors are all essentially mathematical... thingies so is there some way that I can get the mathematical calculations that are used to make up a vector object in Illustrator? Or any third party program or script that can pull these formulas for me?
View 13 Replies View Related I work a lot with Processing to create picture based on mathematical formula, but i need to do the same in Illustrator in order to print those picture.
Is there any way to do this, like the expressions in After Effects, or a third party plugins.
Or did i have to find a way to output good picture from Processing.
one of my top questions ever about photoshop is where could I found some documentation about the real math equations and algorithms that plays inside blend modes operations?
View 1 Replies View RelatedI am working on a cool project and need to know how to do this.
View 20 Replies View Relateddisplay math equations as in-place vector OLE objects in Coreldraw 12.It looks like the Mathtype OLE in CDR saga is still not resolved, even with the latest Mathytype and Corel X5. The option to insert as a bitmap is not at all convenient - one wishes to be able to edit in-place and have vector scalability.
The work-arounds posted in various forums don't seem to work with complex mathematical symbols, adding fonts to the system doesn't seem to work, WMF/EMF also getting messed up, and so on. As Mathtype works flawlessly e.g. in MS Office and Open Office, the question is what is CDR doing...
I recently tried another program, "Aurora" [URL] , which renders *Latex* equations as vector OLE objects - quite nice (there are a couple of other Latex OLE solutions out there, but this one has the options I need). Free trial version.
Aurora supports both vector and bitmap rendering. Vector rendering works perfectly in all programs I tried, except ... Coreldraw. Choosing vector rendering shows some horrible font substitution. I tried adding the Latex fonts to the Windows system, but the problem seems to prevail (and all the other programs, e.g. Word, OO, work fine without doing this). But maybe it is just my version and system configuration.
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies View RelatedSetting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedI've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
I would like to know if there is a way to insert drawing no.1 into drawing no.2 (not copy sheets!) so that if I change the drawing no.1, the drawing no.2 (the one that contains no.1) also updates.
That is because I would like to have one part of the drawing that is ''standard'' and multiple drawings that contain this part (so that this part is defined in all drawings but is always the same). Because I don't want to have a separate drawing for the ''standard'' part, but only drawings that contain it.
When we put an angular dimension on our drawing, the unit is degrees. How can we make an angular dimension on our drawing with radians as unit?
View 1 Replies View RelatedI did a 3D model on inventor, and now I need the drawing from the model, it is a simple axle, but I really can not figure how to do it. I have looked around, but I failed in finding an awnser. I am sure it is very simple,
View 4 Replies View RelatedI am using Inventor Pro 2010.I have a model and I am driving the dimensions from EXCEL. The model updates nicely when I change dimensions but the drawing (idw) does nothing. In the browser instead of the usual tree in the view there is this red lightning bolt and under them is a big plus (+) sign and the words Solid.... after it.I was assuming that the lightning bolt meant something needed updating, but I can't find how this is done.
View 9 Replies View RelatedI have problems with exporting a Inventor drawing to dwg autocad drawing, the message I get when a try is: Cannot open XML file: c:....Inventor 2014/InventorCustomization.xml.
View 1 Replies View RelatedIs there any way of accessing the properties from an IPN in a drawing as opposed to its assembly - which seems to be the default.
View 2 Replies View RelatedI need to convert a idw drawing to PDF and JPG, when save to PDF there are no problems
but when I do it for JPG it seem to be a screen dump and not similar to the PDF I only need the drawing exact as the PDF. Is there a way for this.
I have a situation where I have my master BOM that is shown on sheet 1 of my drawing that represents everything shown on the drawing. What I am running into is I have to detail a couple of sub-assemblies as details on the drawing.
What I do is bring in views from that sub assembly seperate from the main assembly, but the problem is those items dont show up in the main BOM. I end up having to drag in a second BOM that I place off of the drawing sheet as well as adding line items in the main BOM to represent these components in the sub assembly. Then manually change the items numbers in the second BOM to match the iotem numbers in the main BOM. What I would like to know is if it is at all possible to link the two BOM's together so I can change the item numbers in the main BOM and it funnels down to the second BOM.
I cannot seem to install the SDK Drawing tools with Revision Cloud. When I click the msi file, the installer says it was successful, but I cannot find it on any INV ribbon and it is not shown in the list of available add-ins in Add-In Manager. Really need that revision cloud!
Inventor 2011, Win7 64bit.
I can load it on our Inv2011 32 bit WinXP machines, however.
Can I set a drawing scale? If I want to print 1:2, 2:1 and so on? If so how?
View 8 Replies View RelatedWhen I try to open this drawing I get this error "Internal error in persistence operation (Can't load segment PmBRepSegment via a RSeRef when loading segment DLSheet35DLSegment)".
Is there a recover command in Inventor 2012 similar to the recover feature in Autocad?
I want to create a .pdf according to a rule who is :
IF “iProperty Design State" = “Released” then ".idw is exported to .pdf in "C:/...
I'm working on a Isometric drawing and im trying to dimension the view. I keep the original view there and cut another of the same view and place that cut view over the original, so I have something to snap to while dimensioning.
Every time i go to place the cut view over the original and i always grab the wrong view and move it and I am wondering if there is a way to pin the original view in place permanently?
I was wondering how everyone uses drawing numbers on their part and assembly drawings? Do you use the part names or drawing numbers to keep track of everything? And do you save the parts with their names or with a number? We are currently restructuring all our processes.
View 2 Replies View RelatedI'm trying to add a new unit's type for a specific drawing.
Is there any way to add one with its corresponding calculation parameter?
Under the "Style and Standard Editor" Panel i cannot modify it.
The End result is to display a " Symbol after the first Units instead of the in unit (see enclose picture that i manipulated to display the end desired result).