CorelDRAW Graphics Suite 12 :: Display Math Equations As In-place Vector OLE Objects?
Jun 6, 2012
display math equations as in-place vector OLE objects in Coreldraw 12.It looks like the Mathtype OLE in CDR saga is still not resolved, even with the latest Mathytype and Corel X5. The option to insert as a bitmap is not at all convenient - one wishes to be able to edit in-place and have vector scalability.
The work-arounds posted in various forums don't seem to work with complex mathematical symbols, adding fonts to the system doesn't seem to work, WMF/EMF also getting messed up, and so on. As Mathtype works flawlessly e.g. in MS Office and Open Office, the question is what is CDR doing...
I recently tried another program, "Aurora" [URL] , which renders *Latex* equations as vector OLE objects - quite nice (there are a couple of other Latex OLE solutions out there, but this one has the options I need). Free trial version.
Aurora supports both vector and bitmap rendering. Vector rendering works perfectly in all programs I tried, except ... Coreldraw. Choosing vector rendering shows some horrible font substitution. I tried adding the Latex fonts to the Windows system, but the problem seems to prevail (and all the other programs, e.g. Word, OO, work fine without doing this). But maybe it is just my version and system configuration.
View 2 Replies
ADVERTISEMENT
Aug 18, 2011
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
View 14 Replies
View Related
Jun 3, 2012
I am stunned that CD still does not have feathering of vector objects-- Why would this be???? Is there a workaround?
View 10 Replies
View Related
Jul 9, 2013
This is my first post in the Corel forum and I hope I did it all right here:
First Bug -> In my last contest work I've tried to embed many transparency effects. While I designing my graphic I've used (among many others) a transparency effect that named »Behind« (in my German version of CorelDRAW it's named »Hinter«). I've applied that effect to a texture bitmap graphic and it worked correctly so long the bitmap overlaid a vector shape in an ordinary way. But after I include the bitmap into the vector shape (using the vector shape as a Power Clip) obviously the used transparency effect conflict with the anti aliasing function of the vector shape and the smooth margins of the vector shape turned into rough boarders and the vector shape looked like a bitmap in a poor resolution. I guess it is only an indication error in CorelDRAW but for a designer's eyes this bug is very disturbing and should be corrected by Corel!
Second Bug -> Often I use CorelDRAW for vector illustrations and that's why I have to integrate scanned sketches (JPEG format) to build vector illustrations bases of it. Here we have another indication error or better to say a performance problem of CorelDRAW. While I using the sketch image in extended view mode the zoom function of CorelDRAW works correctly and pleasant fast. But if I switch to simple contour mode the performance of zoom mode of CorelDRAW worsens rapidly. The performance of my computer is not the problem with this because my hardware is on a high level and I use an well arranged and clean Windows 7 operating system. It would be nice if Corel is able to fix that problem because it disturbs the work flow enormous and it minishs the fun that I have while I'm using CorelDRAW!
View 3 Replies
View Related
Mar 24, 2012
I'm using CorelDraw 12 to make mathematical drawings. Triangles, circles, tangent lines, perpendicular lines, etc... and that works really fine
But... I'm having a hard time entering mathematical equations, especially when using a lot of fractions and square-root-signs. Is there an "easy" way to do that?
View 4 Replies
View Related
Jun 19, 2012
I have problem with publishing my work in PDF. I have vector background (in thin stripes like) and several polygonal bitmap objects on it but in the PDF-file everything under the bitmap objects is bitmap also... And the stripes (of my background) are very ugly and jagged - part vector, part bitmap...
Could I complete that work correctly in CDR or have to search some other resolution?
View 6 Replies
View Related
Mar 5, 2011
Whenever I use the Trace option to convert, the result is an image filled with closed objects. Because I use vector images with a laser machine, and because the laser cuts everything it reads, the "double" lines (shared lines of the objects) get cut as many times as they appear. So I have to go in and break apart and delete segments & this goes on for days. I've tried welding, but welding makes one of the objects disappear completely. I've tried changing from cdr to svg, exporting & importing, hoping it would simplify, but that doesn't work either. Is there a way to have the bitmap converted to simple lines instead of overlapping objects?
View 9 Replies
View Related
Apr 24, 2013
In my CorelDraw X6 64bit (v16.3.0.1114) the Hue/Saturation/Lightness adjustment effect is not working on vector fills, but its fine on bitmaps in CorelDraw X6 and Photo Paint X6 as well.
It's not effective even after trying F8 reset.
Is there any solution to get its functionality back for vector fills also?
CDGS X6 64bit - v16.3.0.1114Environment: MS Windows 8 Pro 64-bit OSHardware: Intel DG45ID, Core2 Quad CPU Q8300 @2.5 GHz, Memory DDR2 8GB
View 1 Replies
View Related
Jan 4, 2009
one of my top questions ever about photoshop is where could I found some documentation about the real math equations and algorithms that plays inside blend modes operations?
View 1 Replies
View Related
Feb 5, 2014
I want to construct some mathematical and scientific equations in Ai. Where I can get the necessary fonts that will work in Ai?
View 4 Replies
View Related
Jul 10, 2013
I am working on a cool project and need to know how to do this.
View 20 Replies
View Related
Jul 29, 2012
I am having trouble doing this in my current software, Serif Drawplus, PSE, Photoplus, (I have Gimp but haven't used it ever yet). And I am considering buying X6 for use in other projects. So, can x6 do this in either Photo Paint with a bitmap, or in X6 with a group of Vectors?
I want to wrap a bottle with a logo. The mesh warps aren't working for me in the above applications, and envelope warping will not work either. Transform-Warp is not present in PSE. I mention that because I see a tutorial for PS using that. How would Corel X6 Suite do this? I am considering buying the software once some questions I have about it are cleared up. I wish Corel would make the manual and tutorial videos public. I'd rather download the trial for actually using it rather than trying to see if some feature is present, or a workaround for a feature a competitor has.
I am also hoping to make in this project, some 10-20 different bottles with the logo on, of different sized bottles and different rotations of the bottles. Plan D is acquainting myself with Blender, but lets hope I don't have to go that far!
View 8 Replies
View Related
Mar 14, 2011
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies
View Related
Sep 24, 2011
I am trying to place my cut outline on my image. I have turned the image from a jpeg to a bitmap but am still having trouble placing the cut line on it.
View 6 Replies
View Related
Sep 14, 2011
We have certain registration marks that we use on our designs before we print to vellum. How to be able to write a macro that could do the following? I've attached an example image of where we place the registration marks and am also attaching the actual registration mark CDR file. I'm assuming this would probably be rather simple...
We'd like this registration mark to be centered to the image and placed on the top and bottom of the image at .25 inches away from the image itself. So, I would think the macro would have to select the entire image on the page, then decide where .25 inches is away from the top and bottom of the image and place the registration mark, centered in that area.
View 12 Replies
View Related
May 27, 2013
I'm working with Corel Draw X6 and need to place sports cliparts in my document.
I opened the connect docker and found all the clipart files.
Problem : I only see the title which does not give a lot of information about the content of the clipart.
Question : What do I have to do to see the pictures?
View 10 Replies
View Related
Aug 22, 2011
When creating a tile to make a seamless pattern, how I can accurately place an ornament in the four corners so that when the pattern is applied as a fill everything matches together perfectly.
View 3 Replies
View Related
Mar 11, 2011
This is probably a moronic question to most of you, but in my defense I just started using coreldraw X5 yesterday, and I have no graphic designing experiance.
My boss is having me design the backdrop for a competition he is hosting. He is an Event Producer. And Im trying to take the company logo and place it on an image in corelDRAW X5. I cant figure out how to erase the white from behind the logo. Or convert the image that will do it automatically.. I dont need a power point presentation, I have full access to all the tutorials and the stuff the program came with, and I need the education on this product anyways.
View 3 Replies
View Related
Jul 7, 2008
I want to import AI vector file into corel draw but it seemed not possible to me, i did try with .ai, .eps , .pdf files but its not working with corel draw. Is there any way to do that.
View 14 Replies
View Related
May 30, 2013
Marshall's Burger Logo (Red Background).pdf
I receive a PDF file from my client which is their logo.
The text is suppose to be vector, but they appear as bitmap and I cannot apply fill and outline to it.
I can edit the nodes with the Shape Tool after I converted it to AI or EPS format, but still cannot apply fill and outline.
View 14 Replies
View Related
Aug 7, 2011
I would like to convert a jpg image into a vector is that possible? I have search for tutorials on the net but have yet to find anything suitable. Below are the two images I would like to convert into vector to use as website logo.
View 6 Replies
View Related
Aug 7, 2012
Is there any free site for this kind of vector floral design?What I found are mostly the simpler type of floral design.
View 9 Replies
View Related
Jul 2, 2011
I have a vector that is 1000 pixels wide and 500 pixels high. How do I reduce it down to 1000pixels wide and 120 pixels high? Can I do that without distorting the image?
View 2 Replies
View Related
Jan 18, 2012
Use CorelDraw X for laser engraving? I did have X3 and just changed to X5 and need to cut Ovals in Flexi Brass and the file engraved fine, but did not vector cut the Red outline.
View 10 Replies
View Related
Jun 11, 2012
I use and really like Corel Draw X3 (almost 3 years) and will keep that version on one P4 computer that runs win xp pro 32 bit.
X3 has been a great version that never crashes but it is getting slow as I increase the number of objects and symbols in my files. I have a new comp with win 7 pro 64 bit running CDraw X6 and the latest epilog 64 bit driver for my mini 24. I have been using the new X6 for 3 days .
In X3 a hairline or .001 is a vector cut. A line width of .005 and above are raster lines and they work well in my Epilog mini 24. I am using a 1.5" diam lens. In X6 a .005 line will not raster but only vectors. If I change it to .006 it becomes a raster line and will engrave OK.
The big Question:
Is there a way to make .005 raster as it did in X3? I have hundreds of files that are all .005 line width. I don't mind changing them but would rather not.
Could this change be because of the latest Epilog 64 bit driver that I am using with win 7 pro? Almost all my files have oddles of very fine detail (.005) and they would look a bit muddy changing the line width to .006.
View 2 Replies
View Related
Oct 26, 2011
[URL]
I made a circle over a image. I want to erase-trim the image outside the circle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 6 Replies
View Related
May 12, 2013
X6 becomes very unstable when using fills with vector patterns. There is, for whatever reason, a lower limit for the size of the pattern (1 inch) that is way to high for most textures, so the only way to work around is to calculate the wanted size of the pattern tiles, enlarge the object accordingly, fill it, assign the size with object attribute and renormalize the size of the object. This used to work fine in prior versions, but X6.3 already crashed several times instantly or soon after the procedure at my site. This is not amusing.
Is there maybe another way to get past the silly one inch pattern size limit?
used hardware: Dell Precision T-7500 workstation / Xeon 5680 6core @ 3.3Ghz / AMD Firepro 8800 / 16 GB RAM / Win7x64
View 9 Replies
View Related
Nov 2, 2012
I'd like to create a vector graphic with precise object size and placement so that when I import into PhotoPaint I get a precise conversion.
For example (use no outlines):
make a black square 10mm in diameter create 9 colored squares 2mm in diameter placed 1mm from the edge of the black square and 1 mm from each other copy all your squares paste into photopaint setting size to 10 pixels square and turning anti-alias off what you get is not what you drew in corel draw
Here's my example as a vector:
and as a bitmap:
So the squares are completely the wrong size - 1 pixel larger than they should be and in the wrong position!
Interestingly if you import the same vector as a bitmap 100 pixels square it looks better - however you'll notice that the colored squares are, in fact, 21 pixels square and not 20!
The conversion process seems to make every object larger by one pixel in each dimension - not useful. I should note that this effect happens in X5 as well.
View 16 Replies
View Related
Apr 8, 2013
I'm a longtime CorelDraw user (since the 90s), so I generally know what all the tools are... but there are times my mind lapses. Unfortunately, in CDX6 none of my tooltips appear. This is on version 16.3.0.1114 .
CTR+J > Workspace > Display > Show Tooltips has no effect.
Running on Windows 7 Professional x64 with 12GB RAM and NVidia Geforce 480 with latest drivers.
View 5 Replies
View Related
Mar 7, 2013
Just installed X6 and tried CONNECT for the first time and it doesn't display the thumbnails of the vector images only bitmaps etc.. Any way to correct that?
View 7 Replies
View Related
Apr 12, 2010
I have just installed Corel Draw X5 upgrading from X3. Using the program to run (2) laser engravers.
One Xenetech XLT1325 and one ULS M-300. Everything works fine until I send over a job which requires a vector cut line (hairline set to higher power to cut through plastic etc..) The vector do not appear to be recognized by either laser machine. I have tried to import the pallette that I was using in X3 but to no avail.
View 10 Replies
View Related
