When creating a tile to make a seamless pattern, how I can accurately place an ornament in the four corners so that when the pattern is applied as a fill everything matches together perfectly.
View 3 RepliesI was going down the list of a few thousand web photos that we use on the company site, resetting levels via the Tone Curve in Paint X3 to make them more legible and uniform, when I noticed something odd.
The filesize that Paint indicates will result from a particular jpg compression level does not match what the Windows XP file folder indicates. Usually the discrepancy is only a couple K, but it can be much more and there seems to be no rhyme or reason to it.
I will load a jpg that is shown in windows as 12K, adjust the tone curve to match other product photos, then go to save, adjusting the compression while watching the Paint claim for resulting file size. Let's say that Paint is claiming 6.7K at compression of 14. When I actually do the save, it shows up as several K different, usually bigger - say 10K. How is it that Paint is so consistently off in this?
I need to make a hexagon with rounded corners instead of pointed.
View 6 Replies View RelatedI have prepared a calender where all the rectangles are rounded cornered and now client is asking acute angles without corners how to bring back them to without corners. Since selecting each objects and using shape tool and to unround them consuming.
View 6 Replies View RelatedWhat I do not like is that I draw a rectangle and then add the radius corners and it is fine.
If I then drag the box taller or wider the radius of the corner changes too. But also I have noticed that it does this even if you drag the box to size first then add the radius corners.
example: I make up a rectangle and add start adding text. Then I have to make the box bigger so I do that, finish adding my text. Now go to add in the radius corner and they are all skewed out of shape. This seems to be because I have dragged that rectangle bigger that what it was when I first dragged it into place.
Is there a way around this so that I can make my rectangle say 250 wide by 50 tall. Then later on change it's size and add radius corners and make it so the corners are all even and not all out of proportions?
When i tried to add an inside contour to a simple square with rounded corners......the inside contour is missing the rounded corners but when you add a contour to the outside of the square with rounded corners...the corners are round.
View 4 Replies View RelatedI am trying to place my cut outline on my image. I have turned the image from a jpeg to a bitmap but am still having trouble placing the cut line on it.
View 6 Replies View RelatedWe have certain registration marks that we use on our designs before we print to vellum. How to be able to write a macro that could do the following? I've attached an example image of where we place the registration marks and am also attaching the actual registration mark CDR file. I'm assuming this would probably be rather simple...
We'd like this registration mark to be centered to the image and placed on the top and bottom of the image at .25 inches away from the image itself. So, I would think the macro would have to select the entire image on the page, then decide where .25 inches is away from the top and bottom of the image and place the registration mark, centered in that area.
I'm working with Corel Draw X6 and need to place sports cliparts in my document.
I opened the connect docker and found all the clipart files.
Problem : I only see the title which does not give a lot of information about the content of the clipart.
Question : What do I have to do to see the pictures?
This is probably a moronic question to most of you, but in my defense I just started using coreldraw X5 yesterday, and I have no graphic designing experiance.
My boss is having me design the backdrop for a competition he is hosting. He is an Event Producer. And Im trying to take the company logo and place it on an image in corelDRAW X5. I cant figure out how to erase the white from behind the logo. Or convert the image that will do it automatically.. I dont need a power point presentation, I have full access to all the tutorials and the stuff the program came with, and I need the education on this product anyways.
display math equations as in-place vector OLE objects in Coreldraw 12.It looks like the Mathtype OLE in CDR saga is still not resolved, even with the latest Mathytype and Corel X5. The option to insert as a bitmap is not at all convenient - one wishes to be able to edit in-place and have vector scalability.
The work-arounds posted in various forums don't seem to work with complex mathematical symbols, adding fonts to the system doesn't seem to work, WMF/EMF also getting messed up, and so on. As Mathtype works flawlessly e.g. in MS Office and Open Office, the question is what is CDR doing...
I recently tried another program, "Aurora" [URL] , which renders *Latex* equations as vector OLE objects - quite nice (there are a couple of other Latex OLE solutions out there, but this one has the options I need). Free trial version.
Aurora supports both vector and bitmap rendering. Vector rendering works perfectly in all programs I tried, except ... Coreldraw. Choosing vector rendering shows some horrible font substitution. I tried adding the Latex fonts to the Windows system, but the problem seems to prevail (and all the other programs, e.g. Word, OO, work fine without doing this). But maybe it is just my version and system configuration.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
02012013010.jpg
Blank Blocks behind text and graphics
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View RelatedClient supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedI have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View RelatedIm using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies View Relatedhow to export png from corel?
View 3 Replies View RelatedWhere is the QR panel on X6.3?
View 2 Replies View Related