CorelDRAW Graphics Suite X6 :: Radius Corners Hexagon
Oct 24, 2013I need to make a hexagon with rounded corners instead of pointed.
View 6 Replies
ADVERTISEMENT
CorelDRAW Graphics Suite X4 :: Rounded / Radius Corners On Boxes And Rectangles
Jan 21, 2013What I do not like is that I draw a rectangle and then add the radius corners and it is fine.
If I then drag the box taller or wider the radius of the corner changes too. But also I have noticed that it does this even if you drag the box to size first then add the radius corners.
example: I make up a rectangle and add start adding text. Then I have to make the box bigger so I do that, finish adding my text. Now go to add in the radius corner and they are all skewed out of shape. This seems to be because I have dragged that rectangle bigger that what it was when I first dragged it into place.
Is there a way around this so that I can make my rectangle say 250 wide by 50 tall. Then later on change it's size and add radius corners and make it so the corners are all even and not all out of proportions?
CorelDRAW Graphics Suite X5 :: Radius Of Curvature Of Object
Aug 6, 2011Is there a reason why the radius of curvature at the corners of an object is not maintained when you either stretch it or shrink it? Is there a way around it without having to redraw and reset the radius?
View 9 Replies View RelatedCorelDRAW Graphics Suite X5 :: Accurately Place Ornament In Four Corners?
Aug 22, 2011When creating a tile to make a seamless pattern, how I can accurately place an ornament in the four corners so that when the pattern is applied as a fill everything matches together perfectly.
View 3 Replies View RelatedCorelDRAW Graphics Suite X6 :: How To Remove Rounded Corners For All The Rectangles At Once
Nov 18, 2012I have prepared a calender where all the rectangles are rounded cornered and now client is asking acute angles without corners how to bring back them to without corners. Since selecting each objects and using shape tool and to unround them consuming.
View 6 Replies View RelatedCorelDRAW Graphics Suite X3 :: How To Space Lines Evenly Along Radius Of Specific Range
Jul 11, 2011I have a radius that is spread between 10 and 40 degrees that I need to evenly space 6 line segments throughout.
What this is for is a property with 5 lots along a curved street. Each lot is the same size and I am trying to draw just the sections that are affected. I have tried using the star feature and reducing it to single lines, but they do not space evenly and getting the line number is very difficult. I have tried dividing the angle range and come up with the correct angle and spacing but this is also an issue. Is there any way to do this without dragging each line separately?
CorelDRAW Graphics Suite X5 :: Add Contour To Simple Square With Rounded Corners
Jul 20, 2011When i tried to add an inside contour to a simple square with rounded corners......the inside contour is missing the rounded corners but when you add a contour to the outside of the square with rounded corners...the corners are round.
View 4 Replies View RelatedPhotoshop :: Change Radius Of Rounded Corners...
Mar 15, 2009DW CS3.
I have made a shape with the Rounded Rectangular Tool (U) with a radius of 7 px. How can I change the current button to have a radius of 10 px?
I can manage to get the Transform Controls to show, but cannot get it to change the radius.
Photoshop :: Make A Square With Round Corners With Certain Radius
Mar 2, 2013I would like to make a square with round corners with certain Radius. I use Rectangular Marque Tool with Feathering set to some value. The thing is that when I cut the shape from Layer I don't get a sharp corner but instead I have shaded corner.
View 9 Replies View RelatedAutoCAD Architecture :: How To Make Top Corners Of Wall With A Radius
Mar 18, 2012How to make the top corners of a wall with a radius. I have attached a file to show in 2d the wall.
Specifically I wish to draw a wall with lets say a 16" radius corner at the top.
Illustrator :: How To Find Value Of Corner Radius Of Rounded Corners
Aug 30, 2012Is it possible to find the value of the corner radius of the rounded corners for a rectangle that was created with the Rounded Rectangle Tool. This if for CS4.
View 6 Replies View RelatedPhotoshop :: Maintain A Fixed Radius Of Rounded Corners During Transform?
Feb 19, 2009i'm trying to design a layout using slices and such for a website. i'm using the vector objects and layer styles inside Photoshop CS4.
Problem is that during resize, all rounded corners get distorted and do not maintain shape or radius, is there a way to prevent rounded corners from distorting during transform?
otherwise this seems way too tedious to be an effective method of creating a layout that may need adjustments later, since things will need to be recreated.
I'm used to working with parametric CAD (inventor/solidworks), so i'm like a fish out of water without geometric constraints or ability to re-spec existing objects without remaking them...takes me back to the days of autocad.
CorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?
Mar 18, 2012why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
CorelDRAW Graphics Suite X5 :: Dropping Lines Of Text Or Parts Of Graphics?
Dec 1, 2010We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedCorelDRAW Graphics Suite X4 :: Graphics And Text Disappear After Zoom In Or Out Quickly
Sep 5, 2009Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedCorelDRAW Graphics Suite X5 :: Can't Export Large Drawing With Raster Graphics
Jul 21, 2013i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
CorelDRAW Graphics Suite X5 :: Import From Illustrator Maintaining Graphics Position And Canvas Size
Nov 9, 2011I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
CorelDRAW Graphics Suite X5 :: Entire Suite Freezes On Start Up?
Jul 23, 2011Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
CorelDRAW Graphics Suite X5 :: Mixing Vector Graphics And Bitmaps
Mar 14, 2011I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedCorelDRAW Graphics Suite X5 :: Exporting Web Graphics To Correct Size
Dec 1, 2011How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
CorelDRAW Graphics Suite X5 :: Missing Text Or Graphics When Printing?
May 9, 2011X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
CorelDRAW Graphics Suite X6 :: Opening AI File That Have Linked Graphics
Jun 19, 2013I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
CorelDRAW Graphics Suite X4 :: Links To Graphics Are Broken When Using Help File
Oct 18, 2012I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
CorelDRAW Graphics Suite X3 :: Blank Blocks Behind Text And Graphics?
Jan 2, 201302012013010.jpg
Blank Blocks behind text and graphics
CorelDRAW Graphics Suite X5 :: Error While Installation - No Graphics Shown
Dec 6, 2013After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
CorelDRAW Graphics Suite X5 :: Dual Graphics Cards
May 22, 2011I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Export PDF When Graphics Has EPS Files In It?
Jun 9, 2011Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies View RelatedCorelDRAW Graphics Suite X6 :: Print Merging Graphics
Nov 6, 2013I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
CorelDRAW Graphics Suite X5 :: Unable To Uninstall Graphics
Jun 13, 2011When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies View RelatedCorelDRAW Graphics Suite X5 :: Size Graphics For Web
May 10, 2012Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: How To Export PNG
Jun 10, 2011how to export png from corel?
View 3 Replies View Related
