I cannot seem to install the SDK Drawing tools with Revision Cloud. When I click the msi file, the installer says it was successful, but I cannot find it on any INV ribbon and it is not shown in the list of available add-ins in Add-In Manager. Really need that revision cloud!
Inventor 2011, Win7 64bit.
I can load it on our Inv2011 32 bit WinXP machines, however.
I instal form SDK User Tools because I need in Inventor Drawing Tools (Revision cloud). I do this install like on website Autodesk show and I didn't get it on ribbon. I do also registry of this plugin but I also didn't get it.
I used Invenbtor 2013 with servce pack.
I draw a rectangle, and I want to draw a line coming out from the rectangle. Normally I would use OSNAP to get midpoint and endpoint, but this time I want to draw it from any part of the edges of the rectangle.
How do I get the cursor to "snap" to the lines of the rectangle? Similarly, I would like this function for the MOVE tool as well, I used this method in Sketchup before and really liked it a lot.
How do I achieve this in AutoCAD? I tried Nearest, Perpendicular, but they don't work as well.
edit: just found out my subject line is not related .
I need to list all the blocks in my drawing and how many of each there are.
View 7 Replies View RelatedI have a drawing that was drawn in MM, I re scaled the drawing by a scale factor of .03937, when I check the dimensions it appears that it is still off by around 5"
View 2 Replies View RelatedI can no longer make changes to one of my gimp files. Everytime I select a tool such as pen, pencil sprbrush, the mouse icon changes, but when i try to draw nothing happens. It seems like all the other tools work, i tried the following
1. made sure the correct layer was selected
2. exit gimp and re-run it.
I'm stuck.
I'm using GIMP in my own language so the tools names translation might not be 100% accurate.
Been using GIMP (2.8 and just switched to the latest one) for a while now, it's been nearly a year on this PC (Windows 7 64 bit, relatively recent hardware, 8 Gb of RAM, etc.) and it's worked smoothly up until a couple of days ago when it stopped working as intended all of a sudden for some reason.
Whether I use my Wacom tablet or the mouse none of the tools that normally allow you to draw (pencil, brush, airbrush, etc.) work anymore (cropping, distorting the image and the likes work fine though), doesn't matter if it's a brand new document or an old file.
The funny thing is that when I go to the "Edit" menu it'll allow me to rollback and undo whatever I did with the aforementioned tools, even though there's no trace of it on the empty canvas itself.
I tried to uninstall and install the software back but it didn't do the trick.This is really irking me as I'm working on an illustration that is due in a week and I basically had to stop working on it altogether because I haven't been able to get rid of this problem (also I can't seem to find anything about this specific issue on the net).
How or where I can get the Detail tools that was in the 2013 Tool Palette?
Batt insulation
drywall
Plywood
studs
pretty much everything you need to build a detail. Where are these tools?
I want to make some icopy tools to suit my needs, i did the tutorial i've found on AUGI "an icopy how to" and then i did a glass panel using the technique i learn there. Everything works fine until i place the icopy on a different plane than the x, y plane.
when i place it in other plane it the icopy behave in strange way. I had this problem since the first icopy test i made and i can't find why it doesn't work.
All my plain AutoCAD seats are running their Express Tools correctly but the AutoCAD that comes with Inventor will not.I have ET partial loaded in my custom menu, just like the plain seats, and it shows up in the pull-down menu and the ribbon but when i pick on any of the tools, it says "Unknown command."
View 6 Replies View RelatedCan this part be made with sheet metal tools...it will be made from aluminum. I attach the shape made with standard tools and the sheet metal attempt.......how do add the sides in sheet metal.
View 4 Replies View RelatedThe model repair tools is apparently new to 2012 version however I cannot see it in my Inventor interface (yes I am using Inventor 2012). Does it should be there or is it an optional add-in (at cost ?). If I should have it I'll get on to the software company and ask them why it's not installed properly !
View 2 Replies View RelatedI have managed to find the Top view, Right view and Front view through the Tools>customisation option, but cannot find Left, top or rear view.Where are they?
View 6 Replies View RelatedWe are using 64bit Windows 7 & Inventor 2012. We got the drawing tools to show up correctly on one machine, but can't get them to show up as an add-in on a second machine. We've uninstalled & re-installed the tools. registarted the tools many times. Nothing seems to be working.
View 9 Replies View RelatedI`ve not used the sheet metal parts that much but have a part which would suit Sheet metal.
How do i make this shape with sheet metal tools .Also how to press the groove starting in the metal at the begining of the bend and continuing through to the end of the bend at the opposite side.Would not even know how to start this part in sheet metal with Inv.2012.
Do i get the metal sheet and use bend to make the sides?
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies View RelatedSetting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedI've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
I would like to know if there is a way to insert drawing no.1 into drawing no.2 (not copy sheets!) so that if I change the drawing no.1, the drawing no.2 (the one that contains no.1) also updates.
That is because I would like to have one part of the drawing that is ''standard'' and multiple drawings that contain this part (so that this part is defined in all drawings but is always the same). Because I don't want to have a separate drawing for the ''standard'' part, but only drawings that contain it.
I have a question for all the mold designers out there! How do you control the number of side actions when designing multi impression tools?
I recently completed a job for a customer where the requirement was to have a 2 impression tool with one side action to control both of the impressions. I found that if you pattern a part within the mold design environment and then apply a side action, the side actions would be copied to each of the patterned parts. I have created a test part to try and illustrate this (which is way out of size and proportion!):- Even if I combine the inserts, I still get the same effect.
How to get the 'Shape to Block' command to work (under express tools).
It says select object, but no matter what object I select eg. circle, pline or line, it says invalid selection. I am running AutoCAD 2012. Are 'shape' objects somehow different from any other objects?
i have cs5 suite. last week everything fine in photoshop. this week, only the tools that are showing are available to use. i can not access the tools when i click on the corner of individual tools. i am running version 10.6.8
View 1 Replies View RelatedThere seems to be way too many tools in the tools panel for me. Many of them I will rarely, if ever use. Is there any way I can rearrange or remove some of them? It would unclutter the screen immensely.
View 8 Replies View RelatedI have an interactive board with tools (such as pen or eraser) which I want to integrate with the AI. The typical scenario woulld be as follows: the user lifts the pen from the tray, the pen event will me mapped into selecting Pencil Tool from AI toolbar after which the user can add freehand annotations to the AI document.
Is there an API which would allow me to map abailable hardware tools with relevant AI tools? Is there an example which would demonstrate such integration?
I am able to use the menuload command to load the express menu, but when I try to execute one of the express tools. AutoCAD say invalid command, there was something on the website that said to type express tools at the command prompt, but when I do that, too it says invalid command.
View 5 Replies View RelatedI installed express tools with ACADE abd ACAD, some of them don't work, example:
_.sysvdlg Unknown command "SYSVDLG". Press F1 for help.
other commands missing:
arctextx, txt2mtxt,mocoro,dimex,dimin,qlattach
I have problem with my Autocad 2011,It always showing a message "unable to load acetauto.isp/fasload failed"
View 1 Replies View RelatedI am using AutoCad Civil 3D 2012, with windows XP, and when I type "extrim" at the command line, I get this:
Command: extrim
"bad argument type: listp #<SUBR @2f9669b0 BONUS_ERROR>"
There are also a few other express tools that when picked from the ribbon menu, do not work either. Now, I have seen elsewhere on the web that in this case, you should make sure there are no search paths set to R14 Bonus tools (which mine aren't), or repair and update express tools from add/remove programs in the control panel. I did this, and the only thing that happened was the numbers after SUBR@ changed.
In my Autodesk Inventor 2012 product design suit there is nothing displayed when I Press
Tools menu
Appliction Options
Colours Tab
My application works with function it acet-ss-drag-moves of Express Tools. Can I distribute AutoCAD Express Tools with the program of Installation of my application?
This to guarantee that Express Tools will be with the user's AutoCAD. If this is possible what document should I use?
I had express tools loaded, but now I have a problem. I try downloading Auto CAD True View, but did not get it to work, since then I have been getting unknown Command "txt2mtxt" now none of my commands work. I try auto cad repair from the install program and it still does not work.
View 1 Replies View Related