All my plain AutoCAD seats are running their Express Tools correctly but the AutoCAD that comes with Inventor will not.I have ET partial loaded in my custom menu, just like the plain seats, and it shows up in the pull-down menu and the ribbon but when i pick on any of the tools, it says "Unknown command."
View 6 RepliesI installed express tools with ACADE abd ACAD, some of them don't work, example:
_.sysvdlg Unknown command "SYSVDLG". Press F1 for help.
other commands missing:
arctextx, txt2mtxt,mocoro,dimex,dimin,qlattach
I am using AutoCad Civil 3D 2012, with windows XP, and when I type "extrim" at the command line, I get this:
Command: extrim
"bad argument type: listp #<SUBR @2f9669b0 BONUS_ERROR>"
There are also a few other express tools that when picked from the ribbon menu, do not work either. Now, I have seen elsewhere on the web that in this case, you should make sure there are no search paths set to R14 Bonus tools (which mine aren't), or repair and update express tools from add/remove programs in the control panel. I did this, and the only thing that happened was the numbers after SUBR@ changed.
How to get the 'Shape to Block' command to work (under express tools).
It says select object, but no matter what object I select eg. circle, pline or line, it says invalid selection. I am running AutoCAD 2012. Are 'shape' objects somehow different from any other objects?
I am able to use the menuload command to load the express menu, but when I try to execute one of the express tools. AutoCAD say invalid command, there was something on the website that said to type express tools at the command prompt, but when I do that, too it says invalid command.
View 5 Replies View RelatedI have problem with my Autocad 2011,It always showing a message "unable to load acetauto.isp/fasload failed"
View 1 Replies View RelatedI recently did a repair on my C3d 2012 (whcih didn't fix the problem, but I found out what that was and sorted it another way.)
I now find that all express tools commands give me the command unknown error.
I have checked in the cui and the Express tools ARE loaded. I tried unloading and reloading acermain.cuix without success.
I tried adding features from the control panel, but express tools do not show in the list.
I checked the text window after I first opened C3d and it definitely lists that it has loaded express tools yet they do not work.
I tried typing expressmenu in the command line, but it says command unknown.
edit - I tried resetting acetmain.cuix and got the following error:
Unhandled exception has occurred in a component in your application. If yu click continue the application will ignore this error and attempt to continue.
Unable to cast object of type 'Autodesk Autocad Customization CUIUnresolvedCUIFileNode to type Autodesk Autocad Customization CUIPartialCUIFilenode'
I have loaded the Express Tools as here [URL] .... says. The Express Tools appear in my menu bar like normal, but when i try to do anything with any of them —FLATTEN, for instance— autocad does not recognize any.
I am running on Windows 8, Autocad Student Version language Spanish.
My application works with function it acet-ss-drag-moves of Express Tools. Can I distribute AutoCAD Express Tools with the program of Installation of my application?
This to guarantee that Express Tools will be with the user's AutoCAD. If this is possible what document should I use?
I had express tools loaded, but now I have a problem. I try downloading Auto CAD True View, but did not get it to work, since then I have been getting unknown Command "txt2mtxt" now none of my commands work. I try auto cad repair from the install program and it still does not work.
View 1 Replies View RelatedI have the express tools loaded and it shows in Autocad. But when I try to use a command it says unknown command. I have tried unloading and loading the express tools many times but the commands in express tools aren't working.
View 9 Replies View RelatedMy question is: Why certin AutoCad files, I'm not able to draw lines?
I'm in model space. I can move objects. I can even erase/delete things. But I'm tring to edit this shop drawing, i need to add some details, so i need to draw some lines. I use the "l" command. Select my 1st point, then 2nd point. It doesn't work? The Command line keeps saying: Specify next point or [Close/Undo]. But no lines are getting drawn. i finally have to hit escape to end the line command but no lines have gotten drawn. its the same thing if i draw a square or circle. (Not sure if you need to know this but these are my companies files created by a former employee of my company using our own AutoCad. So, i would think if he's locked this file somehow, i should be able to unlock it.)
i m trying to move arc text from one location to other but i cannot move it..
View 4 Replies View RelatedWhen I search on Express Tools in the Help section I am told to type EXPRESS TOOLS int the Command Line. That produces the error msg. no such command.
View 2 Replies View RelatedI am currently running Building Design Suite Standard 2014. I have always used several of the tools on the express menu. Convert to mtext, arc aligned text, are 2 of the tools that are not working for me at this point.
View 9 Replies View RelatedCan I uninstall Express Tools?
View 3 Replies View RelatedWHERE AND HOW THE EXPRESS TOOLS ARE LOADED?
View 8 Replies View RelatedIs Express tools an option in Acad 2012 LT and if so how do I install it... It does not appear as an option in add remove programs.I would also like to know do you need express tools for super hatch?
View 1 Replies View RelatedI want to do a short movie with facial animation.
I want to animate 2 bears and 1 human.
Is there any program, to record my face(for the human) and "mix it" with the character?
Or how should I do the Face animation?
I want to change the text in my dimension. I don't actually want to change my the actual dimension, just the text. Is it possible? I want to create drawings that aren't to scale, and put in the dimensions that I want on there.
View 1 Replies View RelatedI have a problem I haven't found an answer to in any CAD documents, books of forums. I would like to create:
a) a continuous line that begins and ends with space or a shape
b) a line (of any type) that has text (i.e. shape) imbedded exactly in the middle (no matter how long a line is) or at equal intervals (e.g. each 1/3 of the line)
Is there any chance linetypes like that can be created or will I need to resort to lisp and trimming/breaking the lines once drawn?
The problem is related to cartographic symbols defined by the State Geodetic Administration.
just got new computer with 2013acade on windows 7 os. is express tools still a separate install?
View 2 Replies View RelatedI would like to know how our old Cad guy would take PDF's from BlueBeam and put them in AutoCad.
Example: I added serveral notes to camera port detail in BlueBeam. Somehow our old Cad guy, would copy just that 1 detail and put it in model space. Its really cool because theres layers to the copied detail so you can edit/make changes in AutoCad. The importing kinda messed a few of the lines up, like the arc line caulking joints i made. AutoCad can select the caulking joints i made in BlueBeam and i can then delete them and make a new ones in AutoCad.
How to import a whole PDF document into AutoCad but the page you insert in not clickable/changeable and its the whole page.
Making linetypes with this Express menu command. I either get a straight line from my shape or dots at the vertex and that's it.
I'm trying to make an edge of pavement linetype.
can't use express tools commands because they forgot to click on install express tool, what is the reason that you have to click on it and Fusion is a part of autocad?
View 7 Replies View RelatedI know that there is a Save All command in express tools but if one does not have express tools installed or loaded how can they access this Save All function from the command line?
View 9 Replies View RelatedI can not find the tcircle command
View 1 Replies View RelatedWhenever I want to save my DWG to PDF I use the builtin pc3 from Autodesk. Normally when I use it, the filename of the dwg is suggested as name for the pdf. But now this is empty and when you have to save 20-30 pdfs a day this is a pain to type over the names everytime. When I use PDFcreator however, it does suggest the name correct, but then I dont have the correct paper sizes.
View 2 Replies View RelatedInitially we got an error message stating: "error: no function definition: VLAX-USER-PRODUCT-KEY".We did some trouble shooting ourselves with information obtained via several web searches, involving the following:
1) Adding .fas files from the Express directory to the appload.
2) Reloading the acetmain.cuix via menuload (had to unload it first, since it was apparently already loaded)
3) Removing and re-adding Express Tools via Programs & Features (Add/Remove programs)
4) Reinstalling AutoCAD 2014
5) Running (vl-load-com) from the command line (no effect)
6) Running expressmenu and expresstools from the commandline (says it's successful).
then we are now getting "error: no function definition: VLAX-MACHINE-PRODUCT-KEY"..The registry keys appear to be OK, and I am seriously at the end of my tether. I have pretty much tried everything I could find to no avail.
I need to list all the blocks in my drawing and how many of each there are.
View 7 Replies View RelatedI have a drawing that was drawn in MM, I re scaled the drawing by a scale factor of .03937, when I check the dimensions it appears that it is still off by around 5"
View 2 Replies View Related