Paint Shop Pro :: Barrel Distortion Correction In RAW
Oct 16, 2013
I have an RX100 and am an avid Paint Shop Pro X5 fan. However, I have had no real success in shooting in RAW format. The reason is because of the awful barrel distortion on the RX100, so that it can achieve its level of compactness.
I want to be able to take RAW pictures, use the RAW lab for white balance, highlight recovery,etc, while dealing with the barrel distortion in an easy manner.
PSPx5 supports the .ARW format, and that I don't have to convert to DNG, I don't know what to do about the barrel distortion. It is possible I suppose to perform a barrel distortion correction individually on every single photo I take, but this seems overly labor intensive.
A script to automagically do this on all images is probably possible...HOWEVER, the distortion depends on the amount of zoom applied, from around 3.9% wide-angle to about 0.5% at the long end. So a batchfile process isn't really appropriate.
Sony has an Image Data Converter. But, when I tried to use it, it did not save any of the barrel distortion corrections back to RAW! Otherwise I could use it as a batch converter, then use PSPx5 like normal.
View 1 Replies
ADVERTISEMENT
Dec 28, 2008
i just bought a new wide-angle camera, and there's this common issue that occurs in all wide-angle lens - whenever i take portrait/group shots, people who stand at the edges always have VERY "flat" faces.
View 9 Replies
View Related
Jun 5, 2003
took a couple of photos using a wide angle lens.
Now I need to get rid of some barrel distortion.
How would I go about doing that?
On most photos its the horizon that's disorted.
Have a look at the attached photos.
if PS itself has functions for correcting the distortion.
View 9 Replies
View Related
Feb 12, 2014
I need to add barrel distortion to a 3ds max camera.
using 2014
View 4 Replies
View Related
Sep 29, 2013
I used the Pinch filter function for barrel correction in GoPro video. Unfortunately it does not correct the whole pictures area: the corners remain untouched. Is there any real barrel correction (fish eye lens correction) filter available for Video Studio?
View 4 Replies
View Related
Feb 25, 2012
I want to copy an part of image A into an selection of picture B.
Using the command " Insert into selection" works, but i get a distortion of image A. The relation of heigth/width is changed by PSP, so that image A fits into the selection, but this is not what I need. I would prefer the parts of image A that don't fit into the selection being cropped.
View 4 Replies
View Related
Dec 28, 2011
How can I zoom the image without distortion?
In photoshop it is "convert to smart object" command.How can I do it with Paint Shop Pro?
View 1 Replies
View Related
Jan 26, 2012
How do i do a geometric distortion without applying perspective? so in the example below. if i want it to look more like the second image (which i did badly with warp mesh,) rather than the top image. that is to say i want to be able to pull the corners like i did with the pick tool for the top image but not have it apply the perspective, which in this case bunches it up to the left. just to keep it in the plane as with the bottom image.
View 5 Replies
View Related
Dec 20, 2011
After I tried to correct the perspective of a building I couldn't remove the rectangle. Every time I uploaded a picture, the rectangle was there. How can I close it?
View 5 Replies
View Related
Mar 6, 2013
I'm trying to correct the distortion caused by a wide-angle lens in Premiere CS6. From what I can tell, there is no filter or transform / distort feature within Premiere itself. I followed the steps in this tutorial to open the MPEG4 in Photoshop, apply the lens correction filter, and then export the video again to be re-imported to Premiere. URL....
However this tutorial is for CS5. I am seeing no adjustment or filter layer in my layers panel, as it appears in the tutorial. When I go to export the video, it seems the Adaptive Wide Angle filter or the Lens Correction filter has only applied to a single frame of the whole clip. Bummer.
View 31 Replies
View Related
Jun 13, 2012
Lens correction, and therefore vingette does not apper in my distort filter drop down menu in cs5? can I put this in to this filter or is it somewhere else.
View 1 Replies
View Related
Jan 13, 2014
I have an Olympus OMD EM5 and I notice that when RAW files are imported into Lightroom, an automatic correction is applied by default. It appears to read this directly from the metadata of the RAW file. How to disable this?
The issue is that this correction means that the RAW files in Lightroom differ from both the camera viewfinder and JPG output in terms of composition - sometimes barely so, and sometimes significantly depending on angle, zoom etc. This is undesirable behavior in a lot of instances where you want the RAW to match your chosen composition.
View 11 Replies
View Related
Jun 4, 2013
My lens profiles in the distortion correction list are small. I looked at the official list and mine is not right. I only have one Tamron lens profile. Nikon and Canon only have about 6 lenses each. What gives?
View 2 Replies
View Related
Jan 13, 2012
Can't see the grid lines in the crop lens distortion correction overlays?
View 2 Replies
View Related
Mar 8, 2012
Can't see the grid lines in the crop lens distortion correction overlays?
View 1 Replies
View Related
Aug 30, 2012
I have run into this problem several times. CorelDRAW has "envelope" which works for vector illustrations. (how I made the sample) Photo Paint does not have a similar tool. How can I pinch the middle in PP. How to make the image on the left into the image on the right.
View 1 Replies
View Related
Oct 29, 2013
In Lightroom 5 I really like the Perspective Correction tool which always produces white Out-of-Canvas areas as a result of image deformation.As a "constain crop" very often would cut out a lot of interesting details, I love to Crop the image a bit wider.The problem are the white areas remaining that were not present in the original, undistorted image.I would love to fill them in with the Clone Tool, but it does not seem to work on those areas!
To make a complicated story simple just look at this image:My aim here is to fill in the bottom left white by simply cloning the missing part of the column.This is a super-easy job which I could do with Lightroom clone tool in seconds. Shall I report it as a BUG? (if so, how?)
View 5 Replies
View Related
Dec 24, 2011
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies
View Related
Oct 28, 2011
I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies
View Related
Nov 24, 2013
What the best way to draw multiple parallel pipes that cross a corridor. In my example I have a track with 4 pipes crossing the track corridor on slightly different alignments (from perpendicular to skewed). I have drawn the pipes on as individual pipes under the same network.
However I cannot get them all to display on the profile. I have tried "Draw Parts in Profile" but it seems to bring up only 1 pipe. managing multiple pipes.
View 3 Replies
View Related
Nov 9, 2013
I'm running Photoshop CS3. I recently got a Wacom Cintiq 22HD Touch with an Art Pen. The Art Pen supposed to give me that 6th rotation(barrel rotation). But when I tried it, it doesn't rotate any of my custom brushes.
View 3 Replies
View Related
Mar 11, 2012
I am trying to design a barrel cam. This works well with lofting, but I am not so sure about the mathematical accuracy. I am used to making cams like this with 1/4 degrees resolution - much too cumbersome in lofting. Is there a way with "_sweep" to constrain the profile (2d polyline) so that it stays e.g. parallel with the Z-axis?
View 4 Replies
View Related
Sep 25, 2012
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies
View Related
Apr 9, 2011
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies
View Related
Aug 20, 2011
if is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies
View Related
May 15, 2012
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
View 3 Replies
View Related
Jun 10, 2013
it's possible to create a barrel vault skylight that would work similar to a curtain wall (i.e. stretch the skylight and it adjusts to a fixed size and adds mullions)?
View 1 Replies
View Related
Oct 14, 2013
Ok, either I am totally loosing it, or it just ain't happening.
I cannot get the Nik HDR module to work with my PSP X5
It's installed, it shows up in my Effects menu, but it only imports one of the photos I have opened in my edit tab.
What am I missing??
View 1 Replies
View Related
Jan 30, 2012
Using PSPP X3 Ultimate.
I have some Tif files and jpeg files that are 600dpi and 400dpi. I scanned these images with my Canon CanoScan LiDE 700F scanner. Can i use my version of PSPP X3 Ultimate to change the dpi value? Is this stuck? I wanted to be able to get the 600 and 400 dpi image files (I have some 300dpi's too) down to the 100-250 range if I needed to. I see there are different export options and compression in PSPPX3Ultimate, but I'm not sure if this will do what I want.
I want to export as Tif and Jpeg again.
Are there any good third party photo and or video editors that I can batch edit this with? It's ok to mention pay programs and I'd prefer good quality freeware if there is such a thing. I am sure that my Corel program can do the trick though. I just don't know how and don't want to rescan multiple dpi's every single time. I only need the archives and then get the smaller dpi when needed.
View 2 Replies
View Related
Nov 2, 2012
I was using a trial version of paint shop pro x5 and still had 11 days left of my trial when it suddenly stopped working. When I click on the icon to start paint shop pro it starts up and then freezes every time when it is loading in the spot that says "initializing color swatches".
I haven't changed anything on my computer- it just suddenly stopped working. I uninstalled it and tried reinstalling it, I also tried restoring it.
View 3 Replies
View Related
Jun 26, 2011
I installed PaintShop Pro Ultimate X3 several months ago. It worked fine initially, but then stopped running and gave me an error message pertaining to a language error. In an effort to fix the problem, I have completely uninstalled the application and removed all of its registry entries. I then reinstalled the program, which appeared to be successful, however, now it simply will not run and gives no error message whatsoever. When you click the desktop icon, it tries to load momentarily, then does nothing more.
I have removed my virus protection and my User Account Control.
View 2 Replies
View Related
