I've imported three mov files and have created them on three separate layers in my AE comp screen. When I press to preview the files they play but only for about 3 seconds. I need them to play the full length of the mov files which is about 15 seconds.
View 3 RepliesComing from a FCP background, and I see this in FCP and in AVID, but I can't seem to do it in premiere, though I really want to. I want a multi monitor set up where the first monitor has my timeline, source window, and project window, then my second monitor has my bins & effects & metadata, then the third will be a full screen of the project window that is still on my first monitor, and then finally a fourth, 65" 4k tv also displaying the project window (mirroring the third monitor). Dragging the project window around and toggling in and out of fullscreen is a waist of time since there was no need to do that with FCP for so many years. I need 3 project windows in premiere (and I dont mean using the reference) , how do I do this with premiere?
View 1 Replies View RelatedA project that I will soon start is a two-screen projection composed of 2 HD screens.
I wonder if it's possible to set up Smoke 2013 to output 2 HD streams simultaneously in split mode - one half of a timeline goes to one screen, and the other half goes to the other.
If it is possible, what kind of hardware would this setup require?
Looking for green screen effects, like explosions, fire and so forth. I found this site Detonation Films , but the clips crashes SV.
View 3 Replies View RelatedI've just started using VS X6 Pro, after not doing much with video for a few years. I previously used VS 10 and 9.
We have a canon P&S camera which produces HD H264 mov files which I am editing for the first time and getting a weird problem. The files play fine on the time line, but when I try to use the multi-trim tool I get two issues:
1. Audio is badly out of sync in the multi trim window, like 1/2 second in a 20sec clip. (again, same clip plays fine on the time line)
2. When I make a multiple trim, the "play trimmed video" button does not work properly. eg if I make two selections from a clip with a gap between them, play trimmed video plays the whole clip to the end, then returns to the start of the second trim selection and plays that.
If I load up an mpeg2 .avi clip, the multi-trim tool works perfectly: audio is in sync and it correctly plays only the trimmed sections.
I have enabled smart proxy on the clips, and following another hint in a thread here, I downgraded quicktime to 7.5.5 but neither worked. Also I have installed sp1.
As 3dsmax is used in so many different areas, I try to get an overview of the use of multi-channel OpenEXR files. EXR files are usually used as an intermediate file format to hand over cg footage to compositing for further processing. Different compositing packages are handling EXR's more or less comfortable. My guess would be and that is not meant as a judgment if you comp in afx, it is less likely that you use EXR files, but when you comp with nuke, I am pretty sure you do. With composite and fusion somewhere inbetween. Also, when you work in ArchViz and MoGraph you propeably prefer psd files, while when you do tv commercials and film works, you are more likly to use EXR.
The questions in the poll are meant in a general way. It doesn't mean when you vote 'Yes' that you exlusivly render to EXR.
I downloaded what is supposed to be a gimp fill pattern pack but it turns out that there is only 1 pat file named 'love patterns.pat'... I open it with gimp to view them but I get an error message 'Opening <file path>love patterns.pat failed: GIMP pattern plug-In could not be opened' how do I use multi image pat files in GIMP???
View 7 Replies View RelatedI am taking a long shot at this because I know its possible, but I cant seem to figure out how to do it. My problem is that I have a lot of resturants clients who have different menu (take out, dine in, delivery) that contain the same items over and over agian. Problem is that if there is a change in one you have to manually change it in other menus. I am wondering if there is a way to setup these menus where you change the text in one file (doc, txt, rft, incopy or whatever)? BUT the tricky part is that, each of these files have its own indepdent text & paragraph styles and that cant be disturb by the edits.
View 16 Replies View RelatedMy AE comp renders as a full-length video of a black screen (with audio, when enabled). Comp plays fine in RAM preview, and I've tried all types of codecs and disabling RAM intensive effects, though I'm working on a quad-core i7 macbook pro with 8 gigs of RAM, so that shouldn't be a problem.
View 10 Replies View RelatedI heard about that its possible to track/grab/capture your brush/viewport while you are working in after effects.
Is this done in AE or did they use tools like fraps etc..?
You can do some cool Realtime Masking Effects with it.
i just installed after effects and i can't seem to find the SCREEN(superposition) option in the blending mode.
View 1 Replies View RelatedI know CC definitely won't work, but I'm on a 13 inch Macbook Pro. The system requirements for CS 6 state you need 1280 x 900, but mine is 1280 x 800! Will the software be buggy and messy? Or will it run alright? Also, I have an external monitor which I can lug to work tomorrow, and that definitely has enough pixels, but I'd really prefer not to do that! Is any success with these dimensions?
View 3 Replies View RelatedHow to Export Many ai Files To A Multi JPGS?
View 7 Replies View Relatedhow you create a flickering text effect as seen in the video :30 in. Also I would like to know how to get a split screen like they do in 1:07. URL...
View 4 Replies View RelatedIs the anyway i can fix it by myself or do i have to wait for Adobe to have an update. here is a screenshot: [URL]
View 9 Replies View RelatedWhen rendering a Video, first AE is ultra-slow, then the Screen starts to flicker, then several AE Icons appear in the Taskbar and than it freezes...
System: Windows 8 on Intel i7 3930 with 32GB Ram, 2TB SSD and AMD Radeon HD 7970m... latest drivers installed...
I cannot open a file in either Photoshop CS6 or CC if the file has more than one layer. The application crashes every tme I attempt to open a multi-layer file.
View 7 Replies View RelatedI am using Civil 3d 2011 and i have about 200 landxml files that I need to import into my drawing. Is there an easier way of doing this besides importing them one at a time?
View 1 Replies View RelatedSo, this is pretty much all I see:
I can't move or do anything with the light. It's just stuck! I've looked at other screens of people using lighting effects and there's (obviously) supposed to be some sort of on screen controls. And for some odd reason mine aren't showing up. I've been having this issue for days now and I'm not sure why it's not working. Also, I'm using Windows 7. In addition, my alignment buttons seem to always be greyed out, or "unclickable".
So I've been trying to follow some 3d camera tracker tutorials to the tee but I keep having the same problem. When I go to render the video instead of the character staying in a fixed spot it starts to bounce all over the video.
This is the main tutorial I've been trying to follow; [URL]
My error rate is only .73.
I have recently, and reluctantly, purchased LT2012 and have learned to hate it with an unbridled passion. I have a client that uses Acad R14dwg still and when I open their dwg files the multileader style is set to some arbitrary "standard" instead of matching the existing dimstyle of "3-16 Letters" that the file was created with. When editing old files it makes it silly to add a leader and have to create a new multileader style with every single dwg I open. Can it be done once and never be done again for all subsequent dwg files regardless of when they were created? Can it be 'matched' to an existing leader that was created years ago?
For that matter, why did Autodesk pull some dimension leaders OUT of the dimstyle options at all? All dwg files are ONLY in model space, they never use layout or paper space, but that's another topic.
This seems to have only started happening recently, and it's a pain. After you preview an effect in full screen, the time navigator brackets are pulled to the very start and end of the video. You return from a fullscreen video preview to see your timeline extended over the whole duration of the project.
Is there some way to turn this off? I frequently work on small sections of a project, regularly watching full-screen previews to check how various changes look, and after the tenth or so time what starts as a minor irritation becomes completely infuriating. It seems like something easily fixed, but I've had no luck finding out how.
When importing a multi-page pdf or ps file into a multi-page document, sometimes the inserted pages will all have their Document Grid layer visibility turned on, even when the existing pages in the document all have it turned off.
If I bring up the object manager, I can go through the affected pages and 'un-eye' them one page at a time. But it's a blooming nuisance, especially when importing dozens of pages at once.
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View RelatedI'm trying to edit a set of titles made in Premiere in After Effects, and after I import the file (as a Premiere file) then load the sequence into the timeline; the preview is just a black screen throughout the entire preview. The titles never show up.
View 2 Replies View RelatedShould I turn off the screensaver and/or energy saver on my Mac during rendering? I've been rendering (or I thought so) for more than 2 hours and when I came back to check on the progress it was basically in the same place as when I left. Now sitting here watching it it's moving again.
View 2 Replies View RelatedI have some R3D files here from my Red Scarlet and Epic. I used the A Box from wooden camera and a microfone with xlr to record sound direct on footage. In Redcine X and Premiere i got the waveform and the sound, but in After Effects i got only a dead spine. No visible waveform. I can activate sound button on and of, also can change the DB, but nothing happend. I also got no sound with Ram preview or rendering. If i put the footage in a Premiere project and import this Pr Projekt to after effects, than i got the waveform. But that is not the way i want to use my footage. Now i lost al the RAW abilitys from my R3D files and some other specials. Why i got no sound/waveform? I have the latest CC version of AE.
View 3 Replies View RelatedI am trying to import or open RW2 files sequences from a Panasonic GH3 camera in Adobe apps (After Effects & Photoshop) on a Mac Pro X.8.3. The Adobe apps do not recognize the RW2 file, they open in Aperçu (don't know the name of this app in English, Preview ?)
View 6 Replies View RelatedDoes CS6 fix the extremely annoying (<-yeah I did, I used the B I U trifeccta) habit of AE storing .TMP files wherever in the hell it sees fit (usually, but no always, the drive with the most space).
View 1 Replies View Relateddoes ae cc support .zip files??
View 1 Replies View Related