After I set my render settings in the render queue for h.264 movie the sound sample rate always jump back to the lowest quality and I can't export the movie with the sound qulity I want to.
View 1 Replies
I am creating video in FLV (custome mode). The only audio compression option is PCM which makes video too big.
How do I add different audio compression codec for FLV video? With other video formats/codecs mpeg-4 I have many moore audio compression options, but not for FLV.
I'm trying to add audio to a slide show. I've done it before on this computer with no problem, but now it's telling me I don't have the correct compression files installed on my computer.
View 1 Replies View RelatedHave reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies View RelatedI have created keyframes from audio file and used them to generate some effect, all works fine, it is amazing how easy it is However, I would like to generate flash (?) so that these effects would be dynamic to different audio files after export.
What I want is basically to create effects that can be used in life event to the streaming music.
Everytime i try to put a Fraps video (with the avi extension) the audio does work but the video does not, there is only the grey part which you see when you have nothing at all. When I try to open it in my documents, it works just fine.
View 6 Replies View RelatedI imported audio into Audition. In Audition, I created waveform and time-varying spectral displays. With Snagit, I video-captured the waveform and spectral display as MP4. Saved it. Imported it to After Effects. No audio.
View 2 Replies View RelatedI have imported footage that works fine in Prelude but not at all well in AE. There is always a problem with the imported footage. But mainly there is never any audio or sound. I have read a few other post and tried the recommended solutions to no avail.
View 2 Replies View RelatedI just created a new project in After Effects 6 and imported an MPG clip with audio, but despite toggling on the audio switches etc the clip has no sound. The visual stuff is fine but I can't figure out why the audio won't work. By the way I have checked the audio on other devices and with other playback programs and it works fine.
View 4 Replies View RelatedWhen I try to import a .m2ts file into After Effects CS6, there is no audio track what so ever not even if I do the RAM Preview. However, when I play the clip in Windows Media Player, the sound is totally fine. But whenever I import the clip, After Effects detects the video as having no sound. It doesn't even give me the option to check the little speaker icon in the timeline.
View 4 Replies View RelatedI have added audio into my composition which is 3:43 long but it says the composition is only 30 seconds long shoud it not automatically update?
Also when i render it , it still comes out as 30 seconds as well
for some reason my video in AE that i am rendering is not in sync audio wise however i have the original file and the audio is fine. why is it that in AE the video is not in sync?i previewed it many time in different scenes however when the video hits about 2mins the video suddenly becomes off synceven tho the original video i have isnt.
View 5 Replies View RelatedI have this audio layer that I want to add as a soundtrack to the intro video I made. The audio is a bit longer than the intro so I added 2 keyframes at the end of the audio to act as a fade out (I decreased the audio levels from +0.00 dB to -19.00 dB). The problem is when I export the project, I don't hear this faiding out. Is like AE doesn't "reads" the 2 audio keyframes. (When I hit play inside the project, with RAM preview, I can hear the fading out, but not when exporting). I have to mention I export the project as .FLV, as .AVI exports much bigger files. I attached a screenshot so you can see the keyframes I'm talking about.
View 3 Replies View RelatedI have a .wav file in my composition that I see the waveform going across the entire composition. If I grab the first 10 seconds of my composition and hit 0 on the number pad, it correctly plays the audio the entire time. When I render that composition, making sure audio is enabled, it doesn't work. The resulting .mov file plays the audio for the first 5 seconds and then just abruptly stops.
I'm using the Creative Cloud version.
Unable to start audio playback. Please confirm your audio device is properly configured or change the driver selection in Preferences: Audio Hardware. On After effects CC
Im on a mac with mavricks OS and i have done what it says and changed it but it go's back to the setting that it was on the one that does not work.
It seams that when editing in After Effects (CS6) despite doing everything i've been told to do i get no audio when editing video clips imported from my digital camcorder. The only audio it seams i can hear in it is an actual song or audio file (MP3) and the worst part is when i render out the video after adding my effect even when i check the audio output box in the Output Module, i keep most render settings the way they are? but i have tried everything that i have seen suggested but nothing seams to work and no matter what i do i cannon manage to get any audio from my finished products unless there is an actual song in it.I must also add that in the Output Module i have tried many formats such as MPEG4, H.26, AVI, WAV, Windows Media and many others, none of them make a difference to the audio, only the quality of the video.
View 4 Replies View RelatedI've been trying to get my Steinberg (Yamaha) ur-28m external USB audio interface/soundcard to work with After Effects CS6 for a week now. The problem is that everytime I change the audio input in the AE preferences to the Steinberg asio drivers AE freezes for a few seconds and then crashes. Same thing happens in Premiere btw.
I've tried everything possible:
- updated Steinberg drivers to newest version
- updated AE to latest version
- trashed preferences
- totally removed and installed master collection again
- formatted hd and Reinstalled windows 7 and installed Master collection again.
- tried all possibles buffer rates
Problem still there... I looked into the events log and it mentions ntdll.dll and makes afterfx.exe crash. Bottom line is I can't work with sound now, which is really frustrating. In other programs (non Adobe) these drivers are rock solid. Apparantly After effects (and in my case premiere also) doesn't like Steinberg. I saw this other thread about Steinberg in After Effects: [URL] Doesn't look like it's been solved.
Main specs of my pc:
Intel i7-2600
16GB ram Corsair
Nvidia gtx 560 ti
Gigabyte Z68P-DS3 motherboard
Seagate 1TB (7200rpm)
I have installed After Effects CS6 in a Mac running 10.6.8(Snow Leopard) with 4 GB ram and have installed all the updates of After Effects. Whenever I try to get the audio output, i get an error: " After Effects Warning: Unable to start audio playback. confirm your audio hardware is properly configured or change the driver selection in Preferences: Audio Hardware "
I tried to reinstall the software and also I tried the Audio MIDI Setup configuration but it too is of no use.
I've had an issue over the last couple weeks with Ae CC where any time I output to uncompressed (audio) codec, no audio is attached. I've verified that my output module was set to Audio Output On. Bringing the file into Pr or back into Ae shows that there is no audio track, even though the setting should have at least made a silent audio track. This happens regardless of the audio format in my composition (.wav, .aif, .mp3), and seems to only occur with uncompressed codec.
Ae CC v12.0.0.404
Windows 7 64-bit
I'm doing' music and animation, but I want to place markers every few seconds, or consistently to the bpm. It would save me a WHOLE not lot, but ton, of time.
View 2 Replies View RelatedI'm working with the denoiser filter cleaning up some audio in an interview. In the timeline the audio sounds clean but on the export certain clips revert to their non-denoised state. It seems to happen with the same couple clips and I have tried unlinking and relinking the media, outputting audio only, outputting just pieces of the timeline and, of course, restarting my machine. There are lots of other clips in the timeline using the same filter and they sound fine
View 1 Replies View RelatedI imported my files from Premiere Pro CS6. I rendered in Premiere Pro prior to importing it to AE.
View 1 Replies View RelatedI want to visualize a song on a easter egg edges, which are curved. So, my question is how do i curve Audio spectrum without distorting it like with Polar Coordinates?
View 3 Replies View RelatedAfter importing a .mov from a canon t3i.
No audio in the preview and even after render. Why??
I am having an issue with my audio sample rate. For some reason it is set at 8 khz by defualt when I am exporting. This was not an issue until the latest update (2 weeks ago). I'll try and give all the info I can up front. Also I tried customer support...
Ok the issue I am addressing is that the audio sample rate when exporting is at 8khz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to h.264 it insists on resetting to 8khz. Even if I manually set everything look at the render queue and click on output module again it changes the sample rate back to 8 khz automatically which I must adjust again. Why can it not just be set at 48000 like every other adobe product is and like it used to be two weeks ago.
I have the same audio file in After Effects CC and in Audacity.
The time markers in Audacity are slightly off than they are in After Effects so my timing is all off.
Also, when Im scrubbing in AE, the time stamp jumps from 1;29 to 2;00. This is the only location where it does this (that I know of so far)
Ive tried different file types and frame rates and RAM preview settings and I have no idea where the discrepancy is.
After rendering the equalizer and waveform are not at all synchronized, when i do ram preview it is
Here are some examples: [URL]....
[URL]....
I dont really mind it for now, but i'll like to get it Fixed
At the beginning of the cross fade transition effect the audio drops out completely and suddenly get's loud at the end of the effect.
I'm using external USB 2 hdd and USB 3hdd
VS ProX5 and VS12
The properties for my video:
File format: mpeg2
file size-1,173.668
duration-478.378 sec
video format: mpeg-2, upper field
attributes: 24bits, 1440x1080, 16:9
frame rate: 29.970
data rate: 25000
Audio:
Audio type-mpeg audio layer 2
total samples-18, 166,967
attributes-48000hz, 16bit stereo
layer-2
bit rate-384
a. Where did they originate (camcorder, internet, TV card etc) Camcorders-SonyFX1 HDV and Canon XHA1 HDV
b. How did they get onto your hard drive (download, firewire, USB cable etc.) Firewire
Project Properties-
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 256 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
I'm attempting to animate a stroke similar to the the new Siri interface in iOS7...The stroke is fixed at both ends but bounces relative to the users voice. How I could possibly recreate this in Ae or even tutorials that exist that follow this same idea?
A video can be viewed on Apples iOS7 site URL.... Its the third phone down on the right.
where i cant see the opacity( you know like 100% and so on) its the same with audio level, position, scale etc. here's a print screen of it [URL]
The reson why it dissapeared is because when i pressed L-L on my keyboard to show the audio waves, but instead i must have pressed something wrong or maybe the layer the layer want selected.
I am looking for a way to render a 3d model that reacts to an audio in real time. I know processing does the audio reacting in real time but I was wondering if this is possible to render a 3d object that react to the audio via after effect as well?
View 2 Replies View Related
