I have the same audio file in After Effects CC and in Audacity.
The time markers in Audacity are slightly off than they are in After Effects so my timing is all off.
Also, when Im scrubbing in AE, the time stamp jumps from 1;29 to 2;00. This is the only location where it does this (that I know of so far)
Ive tried different file types and frame rates and RAM preview settings and I have no idea where the discrepancy is.
I'm trying to get back into making youtube videos and I am running into an issue. I have an Hauppauge HD PVR 2 gaming edition. Now one of the features that makes it easier for commentators like me is the ability to have all of the audio channels [game, mic, PC (aka skype chat)] all on seperate "layers" that way you can go into your video/audio editor and have the different audios so you can tweak them individually.
The problem that I have and wondering about is this, is there a way to import the files and have the different audio tracks be seperate? The files that they come in are either .ts [raw] or .mp4 [in program compression]. I would like to keep it in .ts even though its a bigger file as I like my compression style after I've edited that gives the best look without loss when uploading to youtube.
I have see the free program at any-video-converter.com mentioned, but the issue is last time I used it I somehow ended up with a virus. I also have handbrake, the Master collection cs 5.5, and VLC.
Operating System: Windows 7
Software Version: 10.5.0.253
Device: HD PVR 2 gaming edition
After selecting "interpreting footage" in after effects after importing my video clip (the clip shows 24.999 fps) i change it to 25fps and it starts working. It took me a while to figure out why my clips werent matching with my seperate audio, there was missing clips. My footages i import are 30 minutes and after i interpret my footage, it gets shortened to 22 minutes. I am using Windows 7 and AE 5.5.
View 5 Replies View RelatedI imported audio into Audition. In Audition, I created waveform and time-varying spectral displays. With Snagit, I video-captured the waveform and spectral display as MP4. Saved it. Imported it to After Effects. No audio.
View 2 Replies View RelatedI have created keyframes from audio file and used them to generate some effect, all works fine, it is amazing how easy it is However, I would like to generate flash (?) so that these effects would be dynamic to different audio files after export.
What I want is basically to create effects that can be used in life event to the streaming music.
I am using Videostudio 12 and have run into a problem when i try to import *.mp4 clips into the library, and for some reason these clips are being cut to 1 or 2 seconds long.
How i imported them was: Clicked "load video" right above the library box selected the videos i wanted to put in, and then imported them. Does it make a difference that i imported multiple files at once?
Properties of the videos:
Video type: H.264 Main Profile video
total frames:317
Attributes:24 bits, 1280x720, 16:9
frame rate: 59.94 fps
Data rate:16000 kbps
what I'm currently trying to do in After Effects I need to be able to see "left", "right" and "both" channels...but all I see is a single wav form even though it's an mp3. The tutorial I'm following uses an mp3 and gets those channels so I'm not sure why I'm getting different results (see pic).
View 3 Replies View RelatedI can't Import video&Audio file in photoshop cs6..And my timeline is like Cs5.
View 3 Replies View RelatedI´ve a problem when import all types of audio file, the application crash...but is curios that if I export the file that crash the application (in Lost and found) to the desktop and try import this audio there aren´t problem..import ok...and if this audio is edited with a image and import with import media tool (audio and video) import ok.
Another question about import / export...when a tried export a quick time in the column of status of background tasks appear the message that my "host" does not seem to exist, and not process the quicktime move.
why in cs6 adobe premiere pro doesn't import the audio of the AVCHD file?
View 3 Replies View RelatedHave reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies View RelatedI just got done installing the Corel Videostudio Pro x6, I am trying to import my own personal music-audio file into the music track, however when I do the system crashes or another way of saying it, a window pops open saying Corel has stop working. This same problem happen with the x5 Pro version. I notice that the pre-loaded audio files in Corel are files of MPEG-1...do I need to convert my MP3s into MPEG-1 in order for this to work?
I have a few converting tools but none of them can convert MP3s into MPEG-1..
Why After Effects CC won´t let me import an .obj file as AE CS6?
View 2 Replies View Relatedi'm using Cs4 and my problem is cannot import the mov. file
it shows:
***After Effects error:Can't import file "(file name)"
unsupported filetype or extension.
(0::1)
and i have read "troubleshooting QuickTime errors with After Effects"
[URL]
im having problems with the object buffers not working correctly when a i extract them from the C4D file. Not liking this work flow at all. Is there a way to import a AEC file into After Effects CC?
View 10 Replies View RelatedI am importing a large avi file into After Effects. It is 50 minutes long. When I import it into after effects, it only loads 32 seconds of it. I've tried renaming the file, reloading the program, but it still will only load that small portion of it.
View 4 Replies View RelatedMy AE cs6 version is 11.0.2.12, it imports obj file well and I can drag the obj footage to the timeline,since I last did this in June using a form effects.But yesterday when I importing the obj file from the project panel,it warns me with the pop-up window.How can I deal with it?I have uninstall and install for many times,however it doesn't work.
View 4 Replies View RelatedIs there a possibility to import .avi files into AE without converting them into an other file?
View 8 Replies View RelatedThis may have a simple solution (and probably does), but I can't find it. What I'm trying to do is to import an AI file into AE 5.5 as original vectors. I need to be able to scale up to about 12,000 percent and then back down to 100 percent for the effect of an extreme closeup being zoomed out. The point of vectors, of course, is that you can do this without losing resolution... but no matter what I try, AI files keep being imported as raster files. When they're scaled up enough, the pixilation starts. There HAS to be a way around this!!!
View 6 Replies View RelatedEverytime i try to put a Fraps video (with the avi extension) the audio does work but the video does not, there is only the grey part which you see when you have nothing at all. When I try to open it in my documents, it works just fine.
View 6 Replies View RelatedI have imported footage that works fine in Prelude but not at all well in AE. There is always a problem with the imported footage. But mainly there is never any audio or sound. I have read a few other post and tried the recommended solutions to no avail.
View 2 Replies View RelatedAfter I set my render settings in the render queue for h.264 movie the sound sample rate always jump back to the lowest quality and I can't export the movie with the sound qulity I want to.
View 1 Replies View RelatedI just created a new project in After Effects 6 and imported an MPG clip with audio, but despite toggling on the audio switches etc the clip has no sound. The visual stuff is fine but I can't figure out why the audio won't work. By the way I have checked the audio on other devices and with other playback programs and it works fine.
View 4 Replies View RelatedWhen I try to import a .m2ts file into After Effects CS6, there is no audio track what so ever not even if I do the RAM Preview. However, when I play the clip in Windows Media Player, the sound is totally fine. But whenever I import the clip, After Effects detects the video as having no sound. It doesn't even give me the option to check the little speaker icon in the timeline.
View 4 Replies View RelatedI have added audio into my composition which is 3:43 long but it says the composition is only 30 seconds long shoud it not automatically update?
Also when i render it , it still comes out as 30 seconds as well
for some reason my video in AE that i am rendering is not in sync audio wise however i have the original file and the audio is fine. why is it that in AE the video is not in sync?i previewed it many time in different scenes however when the video hits about 2mins the video suddenly becomes off synceven tho the original video i have isnt.
View 5 Replies View RelatedI have this audio layer that I want to add as a soundtrack to the intro video I made. The audio is a bit longer than the intro so I added 2 keyframes at the end of the audio to act as a fade out (I decreased the audio levels from +0.00 dB to -19.00 dB). The problem is when I export the project, I don't hear this faiding out. Is like AE doesn't "reads" the 2 audio keyframes. (When I hit play inside the project, with RAM preview, I can hear the fading out, but not when exporting). I have to mention I export the project as .FLV, as .AVI exports much bigger files. I attached a screenshot so you can see the keyframes I'm talking about.
View 3 Replies View RelatedI have a .wav file in my composition that I see the waveform going across the entire composition. If I grab the first 10 seconds of my composition and hit 0 on the number pad, it correctly plays the audio the entire time. When I render that composition, making sure audio is enabled, it doesn't work. The resulting .mov file plays the audio for the first 5 seconds and then just abruptly stops.
I'm using the Creative Cloud version.
Unable to start audio playback. Please confirm your audio device is properly configured or change the driver selection in Preferences: Audio Hardware. On After effects CC
Im on a mac with mavricks OS and i have done what it says and changed it but it go's back to the setting that it was on the one that does not work.
It seams that when editing in After Effects (CS6) despite doing everything i've been told to do i get no audio when editing video clips imported from my digital camcorder. The only audio it seams i can hear in it is an actual song or audio file (MP3) and the worst part is when i render out the video after adding my effect even when i check the audio output box in the Output Module, i keep most render settings the way they are? but i have tried everything that i have seen suggested but nothing seams to work and no matter what i do i cannon manage to get any audio from my finished products unless there is an actual song in it.I must also add that in the Output Module i have tried many formats such as MPEG4, H.26, AVI, WAV, Windows Media and many others, none of them make a difference to the audio, only the quality of the video.
View 4 Replies View RelatedI've been trying to get my Steinberg (Yamaha) ur-28m external USB audio interface/soundcard to work with After Effects CS6 for a week now. The problem is that everytime I change the audio input in the AE preferences to the Steinberg asio drivers AE freezes for a few seconds and then crashes. Same thing happens in Premiere btw.
I've tried everything possible:
- updated Steinberg drivers to newest version
- updated AE to latest version
- trashed preferences
- totally removed and installed master collection again
- formatted hd and Reinstalled windows 7 and installed Master collection again.
- tried all possibles buffer rates
Problem still there... I looked into the events log and it mentions ntdll.dll and makes afterfx.exe crash. Bottom line is I can't work with sound now, which is really frustrating. In other programs (non Adobe) these drivers are rock solid. Apparantly After effects (and in my case premiere also) doesn't like Steinberg. I saw this other thread about Steinberg in After Effects: [URL] Doesn't look like it's been solved.
Main specs of my pc:
Intel i7-2600
16GB ram Corsair
Nvidia gtx 560 ti
Gigabyte Z68P-DS3 motherboard
Seagate 1TB (7200rpm)
