I am looking for a good lightning solution to use in a number of scenes. I looked at Draper's pflow lightning setup but could not get it to work correctly.. in the short framecount I need it to occur.It looked great but only over 600 frames.
I am animating splines and I think I can get that to work ok.. but
I created a number of models/scenes and applied materials/textures to them using bitmaps that are in another folder.
I then created sub-folders for each of the models/scenes because I wanted to export to .obj and then copied the .max files to those folders. I then opened those .max files and the materials/textures were showing as normal.
I then exported to .obj, so in each sub-folder I then had 1 x .max, 1x .obj & 1 x .mtl files. Problem is that if I now open the original .max files in the normal way, the materials/textures are not showing and a message comes up saying that the bitmap files are missing. I don't understand why this is, seeing as the .mtl files are there in the sub-folders along with the .max & .obj files.
I encountered the much discussed 2739 error when trying to install PS CS3 on Vista Ultimate. I followed the proposed solution. But instead of a dialog box I received the message: not recognized. I have the latest update of Java installed and I have IE as my default browser.
What now? Return CS3?
i've come up with a relatively easy step by step tut using my fav tool -- Shapes
have a go at it and tell me what u think....
UPDATE
I just added another tutorial getting the same affect
but yet maintains the text to be editable (ie not Vector Mask)
(and neither one uses the Warp Tool)
Circular Text
Elemets 11 stopped working with the "windows is checking for a solution" message but nothing after that. I have tried the Ctrl,Alt,shift. Delete Elements settings but this has not worked.
View 12 Replies View RelatedBeen trying to recreate the comic-like effect used in Max Payne cut-scenes, how to make something like this out of a real picture... Cause the way I see it, they've taken real photographs and fixed them... or are these real drawings?
View 9 Replies View RelatedI was trying out the referencing in 3dsmax and i noticed you cant select the object, is there a way to reference an entire scene and be able to do edits like maya? I know you could with containers but containers are only by objects.
View 1 Replies View RelatedWould I be correct in assuming that an HDR map is useless in an interior scene with no outside light source (but interior lights would be used)?
View 1 Replies View RelatedI am importing some .avi files and burning to a disc. Most of the .avi clips are fine on the DVD, but two that have panning sequences are very jerky. I checked the source .avi files and they pan smoothly.
I've explored changing the Speed to Quality slider and also the Frame Type (Upper/Lower field first) setting to no avail.
AVI Clip Properties:
File Format: Microsoft AVI files
File Size: 13,513 KB
Frame rate: 23.976 frames/sec
Duration: 62.479 seconds
Data rate: 215.01 kbps
Video
Compression: ffdshow Video Decoder
Attributes: 24 bits, 720x404
Total Frames: 1,498 frame(s)
[code].....
I'm facing a serious problem with my Co-rel x2 in getting it to cut some inappropriate scenes from an episode of AVI type stuff. The thing is after scanning and deleting the unwanted plans, I cant save the separated selected project as a whole ; and what is worse, the voice is completely gets out of whack! I am desperate and don't know what to do!
View 1 Replies View RelatedI recently converted from Sketchup 8 to 3DS and I've been trying to render some scenes with Vray but they all come out super grainy, like the rendering has a layer of noise on top of it. I have a lot of experience with Vray for Sketchhup and have never encountered this. I attached an example.
View 3 Replies View RelatedI have 2 files that are acting weird. They were created earlier this summer but when I open them now, 99.9% of the geometry is invisible with nitrous and the file is very laggy. I want to get an alphabetized list of the geometry so I can start merging in pieces and keep track of what I'm doing.
Any way to export a list like that?? Or better yet..how to trouble shoot the bad files?
I get a warning when I open another max scene on another machine here at work, it says:
"The MassFX authored in this file was created with a newer version of the plugins. Forward compatibility is not supported so things might not behave properly."
I am currently using PhysX for Max version: 2.7.1.0202.1800 and PhysX System Software 9.11.0621.
Third party plugins installed for Max being used in the scene are: Rayfire 1.57.10; Orbaz Particle Flow Box #2 ver. 1.07 and #3 ver. 1.53. I've gotten this warning in scenes saved from another PC, opened in another, and not even using any PhysX or PhysX capable plugins.
I have got some levels for games I'm working on and a lot of the items have to seal off perfectly, etc etc.
I often cannot snap to any item in an XRef Scene under some circumstances. I think that these are scenes that are failing because some are referencing each other and access stops for some reason...
In the examples:
Scene 1: Referencing Scenes 2 & 3
Scene 2: Referencing Scenes 1 & 3
Scene 3: Referencing Scenes 1 & 2
When editing Scene 2, I am able to snap to Scene 3, but not Scene 1. I don't know if it's something about a reference being an overlay (which all are) and the ordering it loads... I know that in the XRef Scene dialog it lists them (in example above) as Scene 3 above Scene 1 ... but I have not experimented with removing one and inputting them in another order... since it seems that any time I delete a scene from the list in an XRef scene dialog, Max crashes.
Developer of Wall Worm - the 3ds Max Pipeline for the Source Game Engine
CorVex Level Design Plugin
3ds Max 4/Gmax - 3ds Max 2014
Mudbox 2009-2011
WIndows 7 x64
i7 930
12GB RAM
Geforce 480x2
A collegue of mine will save a file in Maya 2012 (a character model) yet, when I open the file, I only see the cameras and image planes. The HUD shows zero faces, verts, etc. When he opens the same file again, all the geometry appears.
View 5 Replies View RelatedI am running Softimage XSI 7.5 Mod Tool on a Windows Vista 32 bit. I cannot open any of my saved scenes, when I do I get an error.
I have done some research and found two things, one, that using a registry fix for windows is the cause of this problem, and two, that the fix to this error is to run the "runonce.bat" file from the "bin" directory. I used a registry fix recently that not only didn't seem to improve my computers performance, but it also stopped XSI from working properly. Apparently lot's of people have had this problem and the fix is fairly simple.
However, when I ran the runonce.bat file, it failed to work, I ran it again this time with a command to produce an error log, and this error came up on about the 25th line: "oleaut32.dll: Registration failed; Result == E_ACCESSDENIED".
Here's where it get's confusing. I created a second windows user, this one not an administrator, logged onto it, and ran runonce.bat. It did not produce the error seen above and instead, when I run XSI from the second user, I can load scenes just fine. But I log back onto the admin account, and the problem persists.
Obviously I'd like to be able to use XSI from my admin account like normal, instead of having to use an "XSI" account. I am fairly certain that runonce.bat's error "oleaut32.dll: Registration failed; Result == E_ACCESSDENIED" is the reason that runonce.bat seems to have no effect.
I'm using Maya 2012 with thirty fluid containers and the scene takes over 45 minutes to load.
What is taking so long to open the file? How can I reduce the time it takes to open the scene without removing the fluid containers?
While working in a drawing xrefs that are attached to that drawing are getting saved "behind the scenes" by AutoCAD.
Specifically one instance was a user changed his working annotative scale while in model space, and this caused all of the attached xrefs to re-save themselves (you could watch the files update in Windows Explorer). He did not save the drawing he was in, just changed the annotative scale. This is worrisome in that we are still between 2011 and 2012 on some projects and I'm worried that a user opens a drawing from a 2011 project in 2012 to look at something and in the background even though he doesn't save that drawing, the base xrefs will get updated to 2012, forcing an unplanned version upgrade for Civil 3D objects.
I know that VS can capture DV and split-by-scene and add the date to the timeline. What I was wondering though, is there any easy way to render all of the split scenes with the date information as separate files?
View 2 Replies View RelatedThere is a Tut on how to do random lightning, but how do i do lightning on which i can direct. e.g. lightning under text. Can anyone give me any advise or locations of tut's.
View 2 Replies View RelatedI'm new to edge animate but have a Flash background and I'm working in Edge Animate on a game which is structured in several scenes. Each scene I did put in a symbol. Now I wonder how to build the main timeline or the "story - controller" so to speak. I have all the scenes but I do not know how to connect them.
In Flash it was possible to add keyframes of scenes one after another (like stairs) and jump forward or backward if needed to load the movie clips. In Edge Animate all scenes (or symbols) are in place from the beginning of the timeline and I cannot move the symbol to a later keyframe. Of course I can move animations in the timeline. The only way I think is to hide the symbols first and make them visible if needed. But this does not seem to be the right way and I don't understand the concept of structuring complex animations yet.
I would like to know how to structure several scenes in Edge Animate properly. Something like a scene loader or unloader would be useful.
I am in the process of making characters with lightning around their bodies but I cannot seem to figure out how to do that.
View 4 Replies View RelatedIs there anyway that i could do a ligthning affect but isolate the lightning and paste just the and not the black background on another image?
View 1 Replies View Relatedhow I can put lightning in between the headphones, to look like it's being transmitted.
View 3 Replies View Relatedway to have a cool lightning bolt effect.
View 2 Replies View RelatedHow can I draw a lightning strike over the pic.
View 1 Replies View Relatedi recently took this pic in utah and i posted it in another forum and someone said to lighten the shadows to make it look better. Now the only way i know how to lighten the shadows would be to use curves but then i always end up lightening the whole pic. So then i tried shadows/highlights but have never really worked too much with that in just working on shadows and not the whole picture.
So here is the before picture....
Have some exemples of abstract and lightning effects.
How to add 3d files (Studio max, Cinema,...) to photoshop and use some brush techniques.
Its been a while but I made a banner a couple years back following an extremely well setup tutorial I found online... I want to use the same concept for something else I'm working on but I JUST CANT REMEMBER all the steps to create it!
I remember how to make some of the stuff... Clouds, Difference Clouds, some stuff like that... But the main problem I'm having is remembering how to animate it to look the way it does.
How do I make a lightning type thing for a signature in Photoshop?
View 4 Replies View RelatedI'm designing a logo for a very electronic band, and I was wanting to put an electrical or lightning sort of effect in the background, like an explosion of elecricity or something.
View 2 Replies View Related