Its been a while but I made a banner a couple years back following an extremely well setup tutorial I found online... I want to use the same concept for something else I'm working on but I JUST CANT REMEMBER all the steps to create it!
I remember how to make some of the stuff... Clouds, Difference Clouds, some stuff like that... But the main problem I'm having is remembering how to animate it to look the way it does.
I am having issues with importing / updating existing storm network.
The problem is when I update the storm network, All the outlets are added as new structures. It does not update the existing headwall / end sections.
I then have to go thru and delete the added (null) outlet structure. Then, reattach the existing outlets to the pipe network to show up in the structure data table correctly.
I am working on modeling a pond riser. I had one model with a series of small round perforations in the riser and I needed to look at a version that used larger, square cut-outs in the riser. So, I performed a "save-as" and adjusted my orifices to match my new model requirements. When I attempted to run the model, I received the following error: "ERROR 537 : Unable to perform multiple storm analysis, no storm was selected.".
I have encountered this one time before and was able to go back to the first model and start over. However, now, even when I run the first model (small round perfs), I receive the same error.
I have a storm event assigned for both models but the program does not seem to recognize this any longer.
There is a Tut on how to do random lightning, but how do i do lightning on which i can direct. e.g. lightning under text. Can anyone give me any advise or locations of tut's.
View 2 Replies View RelatedI am in the process of making characters with lightning around their bodies but I cannot seem to figure out how to do that.
View 4 Replies View RelatedIs there anyway that i could do a ligthning affect but isolate the lightning and paste just the and not the black background on another image?
View 1 Replies View Relatedhow I can put lightning in between the headphones, to look like it's being transmitted.
View 3 Replies View Relatedway to have a cool lightning bolt effect.
View 2 Replies View RelatedHow can I draw a lightning strike over the pic.
View 1 Replies View Relatedi recently took this pic in utah and i posted it in another forum and someone said to lighten the shadows to make it look better. Now the only way i know how to lighten the shadows would be to use curves but then i always end up lightening the whole pic. So then i tried shadows/highlights but have never really worked too much with that in just working on shadows and not the whole picture.
So here is the before picture....
Have some exemples of abstract and lightning effects.
How to add 3d files (Studio max, Cinema,...) to photoshop and use some brush techniques.
How do I make a lightning type thing for a signature in Photoshop?
View 4 Replies View RelatedI'm designing a logo for a very electronic band, and I was wanting to put an electrical or lightning sort of effect in the background, like an explosion of elecricity or something.
View 2 Replies View RelatedThe lighting effects classic plugin from the optional downloads page crashes both the 32 and 64 bit versions of photoshop cc (version 14) on a windows 7 x64 system when invoked from Filter>Render>Lighting Effects Classic.
[URL]
Simply fill the area that you want filled in with random lightning with black.
After that is done, go to:
1) ->Filter->Render->Clouds
2) -> Filter->Render->Difference Clouds
3) Press Control + I to inverse the colors
4) Press Control L to select the levels
5) Adjust the levels so that the lightning is dimmed but not too much.
And from there you can change the colors by pushing Control U, and click on the "Colorize" check box. Adjust the colors as you wish! and mess with it to get cool effects!
I've been using photoshop 7.0 for quite some time now and i've realized that when I go to Filter > Render > Lightning effects.... i cant use the styles bar anymore....i use to be able to but recently i just cant anymore.... anyone know why i cant use the styles option in "Lightning effects" ? Would having win xp sp2 cause some conflict ?
View 5 Replies View RelatedBare tree branches at night in winter; background is clean sky ~ orange glow from lights. I have another picture of lightning on a black background.
How to paint the lightning from one picture onto the bare tree picture with the lightning strike occurring behind the branches.
I used a channel mask to select the sky between the branches, but the layer mask wants to insert the lightning in front of the branches.
how would one make the effect of the star wars sith lightning.
i got adobe photoshop cs2
Software shuts down when using the lightning effects filter.
View 2 Replies View RelatedIn the attached photo of a spread from album liner notes, you may be able to make out some handwriting (I've outlined the area in red.) I'd like that area to be easier to read than it currently is when printed in a book project I'm working on. How can I lighten that area so the handwriting is readable, without making it feel too bright, and have it still blend with the rest of it's side AND the other side of the spread?
View 15 Replies View Relatedi have seen this tutorial which tells you how to create sparks between wires.
i have a wires graphic ready to go but i have photoshop 7 whereas the tutorial is aimed at 5.5. i cant seem to get this effect to work. for instance in step 2 Dan says:
Image>Adjust>Levels,
Image>Adjust>Invert
I need creating a view up a storm pipe. We had the inside of a large diameter pipe scanned. Now I need to be able to create a view looking directly up the pipe. Is there a way to set the view so that the what I am seeing is the view from the center of the downstream end of the pipe looking to the center of the upstream end of the pipe?
View 1 Replies View Relatedis there a way to get the drop down highlighted below to give me storm and sanitary instead of just "standard".
View 1 Replies View RelatedI am trying to figure out how big my pipes need to be for a storm sewer that I already have set elevations for. Every time I input the pipe and rim elevations for the network in the data tab it changes the inputs back to saying design. How do I set my own elevations for the pipe network?
View 2 Replies View RelatedI have an issue with headwalls rotating. When I rotate the headwall structure to 90 degrees from the pipe, the structure rotates back automatically. Is there a way to lock the position of the structure?
See jpeg below.
I have set up a table style to display the type of structure, top of casting, and invert in and out elevations. I have also added a column to display the depth (rim to sump height). When the structure is a headwall, no depth is needed; however, the table displays this data as "???". Is there a way to only show depths greater than zero within the table editor for rim to sump height?
View 2 Replies View RelatedI'm using 3ds (mental ray) for architectural visualization. I normally have different cameras for exterior and interior renders in one model. Each scene should have its own specific lightning and shadow settings (intensity, shadow position, etc)
Is it possible to have multiple sun positions in the same model which would be connected to each camera?
If not, what would be the best way to achieve various lightning settings? I would like to avoid having one file for each camera position.
I am looking for a good lightning solution to use in a number of scenes. I looked at Draper's pflow lightning setup but could not get it to work correctly.. in the short framecount I need it to occur.It looked great but only over 600 frames.
I am animating splines and I think I can get that to work ok.. but
I have created a block and it has a little lightning logo next to it, I have never come a cross this, when I click on other blocks, the logo doesn't appear. Why is it there?
View 4 Replies View RelatedI have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null? What did I miss?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I have a storm crossing shown on a road profile, and the ellipse that represents the storm pipe is only showing part of the inner wall (I've attached an image). This pipe is skewed slightly, but the entire pipe crosses the road alignment, and this should not make any difference.
Also, is there any way, yet, (I'm using C3D 2011) to have the label show not only the pipe name, but also the invert where the pipe crosses the road alignment, and remain dynamic,? In other words, without having to edit the label text, and lose the dynamic capability. Land Desktop would do this, but it was not dynamic, of course.
Win 7 64BIT
C3D 2013
