Been trying to recreate the comic-like effect used in Max Payne cut-scenes, how to make something like this out of a real picture... Cause the way I see it, they've taken real photographs and fixed them... or are these real drawings?
View 9 RepliesHow to make Max Payne 2 graphics novel effect to a picture?
here you can find a picture from max payne 2 graphics novel
find the picture to the right of this text "A first-person Max Payne 2 has never been considered. Max Payne has always been very character-centric"
I was trying out the referencing in 3dsmax and i noticed you cant select the object, is there a way to reference an entire scene and be able to do edits like maya? I know you could with containers but containers are only by objects.
View 1 Replies View RelatedWould I be correct in assuming that an HDR map is useless in an interior scene with no outside light source (but interior lights would be used)?
View 1 Replies View RelatedI am importing some .avi files and burning to a disc. Most of the .avi clips are fine on the DVD, but two that have panning sequences are very jerky. I checked the source .avi files and they pan smoothly.
I've explored changing the Speed to Quality slider and also the Frame Type (Upper/Lower field first) setting to no avail.
AVI Clip Properties:
File Format: Microsoft AVI files
File Size: 13,513 KB
Frame rate: 23.976 frames/sec
Duration: 62.479 seconds
Data rate: 215.01 kbps
Video
Compression: ffdshow Video Decoder
Attributes: 24 bits, 720x404
Total Frames: 1,498 frame(s)
[code].....
I'm facing a serious problem with my Co-rel x2 in getting it to cut some inappropriate scenes from an episode of AVI type stuff. The thing is after scanning and deleting the unwanted plans, I cant save the separated selected project as a whole ; and what is worse, the voice is completely gets out of whack! I am desperate and don't know what to do!
View 1 Replies View RelatedI recently converted from Sketchup 8 to 3DS and I've been trying to render some scenes with Vray but they all come out super grainy, like the rendering has a layer of noise on top of it. I have a lot of experience with Vray for Sketchhup and have never encountered this. I attached an example.
View 3 Replies View RelatedI am looking for a good lightning solution to use in a number of scenes. I looked at Draper's pflow lightning setup but could not get it to work correctly.. in the short framecount I need it to occur.It looked great but only over 600 frames.
I am animating splines and I think I can get that to work ok.. but
I have 2 files that are acting weird. They were created earlier this summer but when I open them now, 99.9% of the geometry is invisible with nitrous and the file is very laggy. I want to get an alphabetized list of the geometry so I can start merging in pieces and keep track of what I'm doing.
Any way to export a list like that?? Or better yet..how to trouble shoot the bad files?
I get a warning when I open another max scene on another machine here at work, it says:
"The MassFX authored in this file was created with a newer version of the plugins. Forward compatibility is not supported so things might not behave properly."
I am currently using PhysX for Max version: 2.7.1.0202.1800 and PhysX System Software 9.11.0621.
Third party plugins installed for Max being used in the scene are: Rayfire 1.57.10; Orbaz Particle Flow Box #2 ver. 1.07 and #3 ver. 1.53. I've gotten this warning in scenes saved from another PC, opened in another, and not even using any PhysX or PhysX capable plugins.
I have got some levels for games I'm working on and a lot of the items have to seal off perfectly, etc etc.
I often cannot snap to any item in an XRef Scene under some circumstances. I think that these are scenes that are failing because some are referencing each other and access stops for some reason...
In the examples:
Scene 1: Referencing Scenes 2 & 3
Scene 2: Referencing Scenes 1 & 3
Scene 3: Referencing Scenes 1 & 2
When editing Scene 2, I am able to snap to Scene 3, but not Scene 1. I don't know if it's something about a reference being an overlay (which all are) and the ordering it loads... I know that in the XRef Scene dialog it lists them (in example above) as Scene 3 above Scene 1 ... but I have not experimented with removing one and inputting them in another order... since it seems that any time I delete a scene from the list in an XRef scene dialog, Max crashes.
Developer of Wall Worm - the 3ds Max Pipeline for the Source Game Engine
CorVex Level Design Plugin
3ds Max 4/Gmax - 3ds Max 2014
Mudbox 2009-2011
WIndows 7 x64
i7 930
12GB RAM
Geforce 480x2
A collegue of mine will save a file in Maya 2012 (a character model) yet, when I open the file, I only see the cameras and image planes. The HUD shows zero faces, verts, etc. When he opens the same file again, all the geometry appears.
View 5 Replies View RelatedI am running Softimage XSI 7.5 Mod Tool on a Windows Vista 32 bit. I cannot open any of my saved scenes, when I do I get an error.
I have done some research and found two things, one, that using a registry fix for windows is the cause of this problem, and two, that the fix to this error is to run the "runonce.bat" file from the "bin" directory. I used a registry fix recently that not only didn't seem to improve my computers performance, but it also stopped XSI from working properly. Apparently lot's of people have had this problem and the fix is fairly simple.
However, when I ran the runonce.bat file, it failed to work, I ran it again this time with a command to produce an error log, and this error came up on about the 25th line: "oleaut32.dll: Registration failed; Result == E_ACCESSDENIED".
Here's where it get's confusing. I created a second windows user, this one not an administrator, logged onto it, and ran runonce.bat. It did not produce the error seen above and instead, when I run XSI from the second user, I can load scenes just fine. But I log back onto the admin account, and the problem persists.
Obviously I'd like to be able to use XSI from my admin account like normal, instead of having to use an "XSI" account. I am fairly certain that runonce.bat's error "oleaut32.dll: Registration failed; Result == E_ACCESSDENIED" is the reason that runonce.bat seems to have no effect.
I'm using Maya 2012 with thirty fluid containers and the scene takes over 45 minutes to load.
What is taking so long to open the file? How can I reduce the time it takes to open the scene without removing the fluid containers?
While working in a drawing xrefs that are attached to that drawing are getting saved "behind the scenes" by AutoCAD.
Specifically one instance was a user changed his working annotative scale while in model space, and this caused all of the attached xrefs to re-save themselves (you could watch the files update in Windows Explorer). He did not save the drawing he was in, just changed the annotative scale. This is worrisome in that we are still between 2011 and 2012 on some projects and I'm worried that a user opens a drawing from a 2011 project in 2012 to look at something and in the background even though he doesn't save that drawing, the base xrefs will get updated to 2012, forcing an unplanned version upgrade for Civil 3D objects.
I know that VS can capture DV and split-by-scene and add the date to the timeline. What I was wondering though, is there any easy way to render all of the split scenes with the date information as separate files?
View 2 Replies View RelatedI'm new to edge animate but have a Flash background and I'm working in Edge Animate on a game which is structured in several scenes. Each scene I did put in a symbol. Now I wonder how to build the main timeline or the "story - controller" so to speak. I have all the scenes but I do not know how to connect them.
In Flash it was possible to add keyframes of scenes one after another (like stairs) and jump forward or backward if needed to load the movie clips. In Edge Animate all scenes (or symbols) are in place from the beginning of the timeline and I cannot move the symbol to a later keyframe. Of course I can move animations in the timeline. The only way I think is to hide the symbols first and make them visible if needed. But this does not seem to be the right way and I don't understand the concept of structuring complex animations yet.
I would like to know how to structure several scenes in Edge Animate properly. Something like a scene loader or unloader would be useful.
I created a number of models/scenes and applied materials/textures to them using bitmaps that are in another folder.
I then created sub-folders for each of the models/scenes because I wanted to export to .obj and then copied the .max files to those folders. I then opened those .max files and the materials/textures were showing as normal.
I then exported to .obj, so in each sub-folder I then had 1 x .max, 1x .obj & 1 x .mtl files. Problem is that if I now open the original .max files in the normal way, the materials/textures are not showing and a message comes up saying that the bitmap files are missing. I don't understand why this is, seeing as the .mtl files are there in the sub-folders along with the .max & .obj files.
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Relatedwhen I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies View Related of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies View Relatedwhen I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
View 2 Replies View RelatedI am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
I'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
View 5 Replies View RelatedI am having in Photoshop CS2. I have had CS2 for over 2 years and have never had this problem. I am not able to open Photoshop CS2. I am getting a message that reads "Could not initialize Photoshop because a required resources text file is missing. It goes through a series of " could not load default contours, styles, custom shaphes because the file could not be found" before getting to the "initialize" window.
View 3 Replies View RelatedI scanned a picture on Microtek scanner and was tranfering it to photoshop when I saw photoshop embeded profile mismatch that has use the emdeed profile or covert document's color
in the working space or discard the emdeed profile. which embeded profile do you use for the photos? I attached the shot of the embeed profile from photoshop.