I can see flat shading with direct 3d, but not on nitrous. it's unavailable on nitrous? it's a shame because flat is very good to see hue variations on textures and stuff like that.
View 2 RepliesI've been running into a frustrating limitation with certain keyboard shotcuts for Nitrous display modes. For example, if I try to use my old 2011 shortcut for "Viewport Box Mode Toggle", the bounding box displays on TOP of the current shaded/wire mode instead of toggling. If I change the assignment to the new Nitrous command "Viewport Visual Style Bounding Box", it is no longer a TOGGLE key and to go back I must then use the key assigned to "Viewport Visual Style Wireframes/Shaded" (or classic "Wireframe/Smooth+Highlights Toggle")...
BUT...
In Nitrous both of these wire/shaded toggle commands do not work properly if you are changing from another display type (such as box). Instead of toggling between wire/shaded, they toggle between wire and the last display mode. So in essence there is no way to toggle between Box and Shaded without r-clicking on the viewport label every time you want to return to shaded mode as far as I can tell. Not being able to quickly toggle Box mode really screws up my work flow, so for now I'm reverting back to DirectX.
how can you adjust the "Grab Viewport" -Animation Quality for Nitrous?
Rendering any one of the styles in Animation produces horrific quality, because the viewport renderer does not spend the few extra seconds necessary to generate nice antialiased image-quality.
there is no way to adjust the rendertime. Because this would make this valuable improvement 50% useless again, if you can not use it decently for this purpose.
the shape merge function (using cookie cutter) is not updating in the viewports when using nitrous? I am making a compound object using shape merge. I select a sphere (editiable poly), pick the shape (spline) and then press cookie cutter, and the vieport does not update. I have display result and update always on. Trid invert, etcetera. I cannot see the cutout portion in the viewport. When I render, the cutout portion is viewable.
View 1 Replies View RelatedI was using 3ds Max 2013 without any service packs installed and my bitmap resolution on screen looked great. I have updated to service pack 5 and now the resolution looks low quality. I have to use large maps for my scenes example 12345 x 4610 px.
I have not changed the driver (Nitrous), under Display Performance I have Improve Quality Progressively and the Procedural Maps Display Resolution at 4096 pixels, and progressive display is on.
From what I've read "By default, Nitrous viewports load texture bitmaps at their full size."
How can I get the high resolution bitmap back? Is there a setting that I have missed?
I would like the viewport shading to remain on the "smooth" visual style. The problem is, after I configure it max will switch back to "smooth + highlights".
See image below
What happened to the Thicker Lines feature in the view port Shading menu? This is an absolutely essential feature! Is it part of the removed features in Maya 2014?
View 1 Replies View RelatedI have an object with a UV map on tiles U0_v0 and U1_V0. I have assigned a standard material to the object, the material has a composite map in its Diffuse Color slot. The composite map has 2 bitmaps in layers 1 and 2, each set on a different tile.
In every viewport only layer 1 is displayed correctly (with Smooth + Highlights shading) while Layer 2 is displayed as if with Flat Shading (swapping the bitmaps confirms that layer 1 always gets priority). Here is an example:
I will add that it renders correctly and this is a viewport thing, in any case I have tried changing the direct 3d settings in the display drivers window (preferences settings > viewport tab) and nothing so far has worked.
I've also tried hardware shading in individual viewports, nothing.I then tried installing different drivers but that did not work either. I'm using an fx quadro with the latest nvidia drivers on windows 7 x64 by the way.
when I use the flat brushes to paint the colours are not flat but are of different tones of the color in the shape of the brush.
View 1 Replies View Related3ds nitrous (alt x) gives me a very strange, way too bright see-through object result. Retopo is difficult in this mode but views on youtube show that the demonstrator doesnt have the same problem so I think it is a setting I am missing. I have a nvidia GTS 250 card.
View 3 Replies View RelatedI normally press "j" to disable the bounding box. but when you press F3 for wireframe and then F3 again to return to realistic view, the bounding box turns back on. is this a "fix" or a bug?
View 2 Replies View RelatedPossible to write custom shaders for nitrous and if so where I'd start to find info on how?
View 7 Replies View Relatedwhy my Material/AO/Lighting looks better in Nitrous-Viewport than it does in the actual render.As you can see in the Screenshots I am working with an A&D Material with active AmbientOcclusion.Even if I try 0 (=unlimited) distance, nothing fancy is coming out.
My gamma Correction is set to 2.2
Skylight with HDR-Map, Intensity 1
MR-Omnilight, Intensity 1
MR-Photographic Exposure is OFF
Usually i have no probs with Ambient Occlusion and MentalRa
I can't find a way to create multi flat patters in one part from a lofted sheetmetal part. Also, didn't the developers fix the 'can't make a flat pattern from a derived part'?
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
When I import a dwg model exported from Revit, the curtain walls (frames and glass pannels) do not display with Nitrous. They are there and can be selected from the layer manager. They are visible if I add an Editable Mesh modifier.
DirectX and OpenGL display properly.
FBX import display properly
is this normal? my display is completly blown out when using the nitrous display. how can i fix it?
the first one is the display, the secon is the render. should they not look similar???
Is there a way NOT to improve the transparency in nitrous in realistic mode ? I really dislike the "noisy" display when moving around objects.
I know i can unselect the progressive refinement, but then the image stays noisy. I would like the transparency just to be as clean and fast as in the "shaded" mode.
have some of you playback performance problems in animated scenes while the Mat editor is open?
View 1 Replies View RelatedThe Material editor by Nitrous, continue to tile the bitmap even if TILE is unchecked.
View 6 Replies View RelatedWorks as it should in Direct3d but Nitrous displays specular weaker than it should. It shows up correctly when you render though.
View 1 Replies View RelatedI have a horrible lag when trying to select objects in Nitrous display mode. When my FPS drop and navigation starts to lag, marquee selection also starts to lag proportionally to the FPS. If I draw a rectangle to select some objects, I have to wait about 3-4 seconds for the rectangular marquee to expand and reach my mouse cursor on more complex scenes. There's no such problems in Direct3D display mode. Even if the FPS drop to 1-2, selection remains lightning fast.
View 2 Replies View RelatedFor an example if I create a sphere, add a turbosmooth with 4 itterations and collapse it to an editable poly again. Then when I try to manipulate the mesh by draging vertices with or without soft selection or paint deformation I get around 10X faster performance with direct3d (roughly 40-50 fps compared to nitrous 4-5 fps).
I know that nitrous is slow with pflow and animation but I did not expect it to have such poor performance with modelling?!
I have the same effect on both of my workstations. Laptop with core2 quad extreme, 12 gig ram, quadro fx3700m, win7 x64. Dells latest graphics driver. Stationary computer with Xeon quadcore, 14 gig ram, geforce 285 gtx card and win xp 64. Latest nvidia driver.
Is there any way to force "shaded" mode in Nitrous to use scene lights and not default lights? We are doing tons of previs and when using "realistic mode" all of the grain and such with transparency, etc looks just awful. Shaded mode is SO much cleaner and faster, but under Nitrous it can no longer use scene lights to shade your objects. Under realistic mode you can turn shadows and AO off, but any transparency does the refinement process and never ends up looking totally clean.
Under shaded mode, transparency looks GREAT and is way faster. If there was only a way to enable scene lights instead of default lights it would be just like the old pre-nitrous days.
We've currently switched over to 3Ds Max 2012 for production and installed the latest Hotfix and Service Pack 1
Our studio pipeline revolves around xref objects to manage large scenes.Upon switching to nitrous the xref materials are not visible in shaded Material Colour the Xref material appears in the material editor and it references to the appropriate .max file Yet in the viewport it will still appear shaded without textures/materials. It will render without issue but we need visibility in the viewport.
This does work under directX/opengl/software but the performance is greatly crippled.
pre 2012, if you had display edged faces on, the selected splines would turn white - so you could tell what was selected in viewport. using nitrous, this isn't possible for us. Open GL or Direct 3D work fine but not nitrous. or is this a bug?
View 3 Replies View RelatedI am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
When I copy a viewport in a layout it does not create another viewport, only a poly line.....
View 6 Replies View RelatedHow do I change a polygonal viewport to a rectangular viewport?
View 5 Replies View RelatedProblem: When I create a new viewport, another viewport's paperspace blanks out or disappears. When I copy a viewport over, the new VP doesn't show anything and you can't maximize/"enter" its paperspace; it's like a simple rectangle, but the properties box says it is indeed a viewport.
Ex. Viewport 1 shows the top view of an object, Viewport 2 shows the right side view... as soon as I add Viewport 3, the top view in VP 1 blacks out. I attempt to ReDraw, Regenerate, etc, but it doesn't re-appear. I've run Plot Preview to see if maybe it's just a fluke with the graphics card on my screen, but alas, even in plot preview the viewport is blanked out.
It almost seems like there is a limited number of viewports I can use.
Solution: Run the MaxActVP command and set the value to a number greater than the number of VPs you actually need. This particular file had that value set at 2; hence, why a new, third VP blanked out the first one.
To show our customers where we serve I would like to highlight everything below this black line... I have done some basic highlighting but it just doesn't looks professional. just shade everything below this black line and make it look professional?
I need it done on this map .
the hardware shading options are all greyed and I can not activate these options. in openGL or DX9 (dx10 isn't working so fine as it seems). My computer is sse3 enabled. I do not understand.
View 1 Replies View Related