I have to do an animation showing a bacterial object traveling through a swarm of red blood cells and then being attacked by a group of white cells that clump to the bacteria. I've looked online and i keep seeing some thing about a " lock bond test " in particle flow.
View 3 RepliesJust downloaded a set of brushes (vegetation). When I click on the icon there are several different brushes on that one icon. How do I get each brush to show seperate and lock it in brushes. Really hard to get the brush you want as it scrolls so fast.
View 2 Replies View Relatedhow to make the scrolling circle effect like in the beginning of all the movies?
View 2 Replies View RelatedI am trying to edit the flemish bond hatch pattern. How can I find out what each number is the .pat file represents?
View 3 Replies View RelatedSome time ago Lightroom started freezing, it didn't matter too much what screen was involved. I'd be editing a photo or even doing something outside of lightroom and lightroom would become unresponsive and wouldn't display the current image etc.
It would allow you to close it, however the process would stay open in the task manager. No matter how one tries to close the tree or process, it totally ignores these requests and requires a reboot to resume work. This also happens while using photoshop with lightroom open - the two programs freezing in tandem.
I have tried doing memory checks on the drive with no problem showing, I have run registry cleaning / ccleaner and so on. There is no spyware or viruses operating. The reliability monitor does not show these crashes. I am unaware of anything that was installed or uninstalled or when this specifically started happening.
There have been a few driver power state failure blue screens while using lightroom (although nowhere near as many as the simple freezes). Unable to diagnose the problem with this I uninstalled and reinstalled lightroom. I have tried both 4.4 and the new 5 in the hope that maybe something was fixed. My display drivers I am pretty sure are up to date also.
System Model: Dell System XPS L702X
BIOS: Default System BIOSProcessor: Intel(R) Core(TM) i7-2760QM CPU @ 2.40GHz (8 CPUs), ~2.4GHzMemory: 16384MB RAMAvailable OS Memory: 16344MB RAM
Page File: 3332MB used, 29354MB available Windows Dir: C:WindowsDirectX Version: DirectX 11
---------------
Display Devices
---------------
Card name: NVIDIA GeForce GT 555M
Manufacturer: NVIDIA
Chip type: GeForce GT 555M
DAC type: Integrated RAMDAC
Device Key: EnumPCIVEN_10DE&DEV_124D&SUBSYS_05701028&REV_A1
Display Memory: 4095 MB
Dedicated Memory: 3034 MB
Shared Memory: 1061 MB
When I'm doing a large import, all I can see is the little white progress bar in the upper left. Since it sometimes gets hung up on an operation, it doesn't provide enough feedback about the processes.
I'd prefer to be able to double click that and see a full activity report in a new window of what is getting imported as it's happening, with a separate progress bar for each item. I'd like to see this for all other actions as well, but importing would be my priority.I requesting a new feature? I'm running Adobe Photoshop Lightroom 4.3 RC [858820].
I'm trying to streamline a daily activity processing photos with Gimp by using incrontab (which makes it when you add files to a directory, it will automatically run a program to deal with the event). I have a python-fu script that I need to run after selecting four corners of what will be new photos.
It will run itself on all images open in gimp which reduces my keystrokes or mouse clicks. The problem I'm having is that when I put four photos into the processing directory, incron opens four instances of gimp instead of opening gimp once and adding each photo to its open images. I'm using Ubuntu Linux. I'd really like to make the same instance of gimp open the photos, but I'm not sure how to do that.
I just made a couple of 3D squiggles and words and things as a test to see if I am able to share PNGs here, if it works I�ll try to make some better ones.
View 9 Replies View RelatedWhen I select "Test Before Burning" it doesn't test, but goes straight to burning (I burn at 4.0 speed)
Also, while burning the detailed progress display continues to say "Video/Audio Multiplexing" through the entire process until closing the disc.
I've installed both current patches as well.
Using this post to test out attachments and images, can we view all when logged out?
This image is using IMG tabs linked to my web site
This Image is using the upload attachment option
I normally get the UCS directions as part of a test to see if current coord system is same as world:
I am seeing a nonnormal UCSxdir and Ydir for several drawings with UCS I know is on world. See the above value.
It took me a while to realize it was because the drawing had ps viewports, and the viewport UCS was user.
How would I get what I would call "the modelspace current coord system info" to do this test.
I am doing this with a drawing not open in the editor, it is DBX style. If it was not, I could do all kinds of things to figure out if modelspace was on world ucs.
[URL] ........
how to test to see if a drawing is already open inAutoCAD using VBA and if it to make it the active document?I have a VBA macro to open xrefs by by just picking them in the drawing butI need to test to see if the drawing may already be open to avoid openingthe drawing a second time in "Read Only" mode.
View 9 Replies View RelatedI am just starting to create some custom linetypes. All is well with solid lines with text. However I have reached a stumbling block as far as hidden lines go.
Basically I get this result -----x-----x-----x-----x-----x-----x-----x-----x-----x
But I am looking for this --------------------x--------------------x--------------------
Not sure how to do this as I get an error message saying that I can only have 12 dash/dot entries before the text.
The plumbers in our don't want to see text that often.
How long does the Test-Version works?
View 1 Replies View RelatedIn X6, I select the Text tool, then in the docker or on the tool ribbon I set the point size to, say, 12 points.
But, with the Text tool still active, when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
Next time I select the Text tool, the point size shows as 12. But when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
How can I arrange for all artistic text I deposit to have a certain point size I choose.
Is there a way to simulate a simple tensile test in autodesk inventor. Let's say I draft up a 1" x 1" x 10" bar. If I input all of the material properties such as yield strength, tensile strength, % elongation etc., is there a way that I can simulate a simple uniaxial tension test on this bar? If so, how do I set it up with the autodesk simulation engine?
View 6 Replies View RelatedText is displaying at the incorrect size in both paper space and model space. It seems that there may be some kind of global scale factor in action e.g. if I add text at size 2.5, it displays at size 2.25 and if I add text at size 1.8, it displays at size 1.62.
How do I set so that text is displayed at the correct size?
I have a link starting from P1.Is there a way to check if the link is intersecting EG or not?
Civil 3D 2014 x64
Windows 7 64-bit
16GB RAM
How would I test for duplicate handles in a file. If I select a cirlce from an xref and it has a handle of "E6" Then I select another circle from a different xref that has the same handle. When I use GetObjectId how do I specify which handle? Is there a way to give a handle and a file path and have it point to the correct entity or would I need to cycle through all entities and check for matching handle and file name?
In the end I would like to select an object, then store that data in a file and then recall that exact same object later.
I am currently using the following to switch to modelspace:
Editor ed = Application.DocumentManager.MdiActiveDocument.Editor;ed.SwitchToModelSpace();
However if you already are in modelspace it throws the error: eInvalidInput
How do I find out which space I am in so I can avoid running this when already in modelspace?
Im trying to write a routine in VB.net based on Fenton's examples from 'Zero to 3D in 60 Minutes'. the routine uses a filter set to select all 2D polylines in a document then a test is needed for each polyline to establish whether it is a loop, which can then be extruded into a solid or it is a non loop, where the operation will need to be an extruded surface, or if the polyline is a non-loop.
So far my code will pick up every 2D polyline and try and extrude it, but i need to catch the non-looped entities to handle them with an extrude surface method or if self-intersecting polylines, to either drop them and not cause an exception or process them in another way.
What entity attributes or methods should I use to perform testing to establish this loop and non-loop existance of the polylines to achieve this. I work with both C# and VB.net.
I would like to know the Cyclone simulation test on the switchboard?
Can it be done in Autocad 2012? What kind of software needed?
If there is a way of testing the pens sensitivity to pressure in real-time. I can hear it now. "Draw a line dummy."
To be more specific, any tool that can test number of levels of pressure sensitivity that a pen is capable of. I thought for sure I would find some downloadable software somewhere but no luck.
I'm using a Bamboo Pen and interested in how to verify it is in good working condition and reaching it's whopping 512 levels of sensitivity and also whether I'm pressing harder then I need to.
I'm testing out a simple Block Table in the Dynamic Block editor and when I go to save the Block, the following alert pops up. Is there a way to "test" the Block to check all the necessary constraints? Or am I just suppose to go about this with good 'ol fashioned trial and error? Seems the block is working just fine so is the alert just a moot point?
fully_cons.PNG
Today as a precautionary measure I downloaded the Adobe font test to do a scan on my fonts to see if any is corrupt. The test showed that all my fonts passed. 3 questions though:
1. Does the script work with photoshop CC?
2. Could I just delete the font test jsx file from the folder when I am done with the test? Or should I keep it there?
3. During the initial process, I was unable to proceed and got an error message "failed to get path for font cache files". As such I unticked the clear font caches to proceed. Would this have affected the results?
Is there a way to print the entire CMYK coated palette. There has to be a way so that i can reference my swatch book against my actual print.
View 1 Replies View RelatedI am using a competitor product for video editing and now I am looking for a new product since the support there was really bad. I tried the testversion of Videostudio X4 and downloaded the recommended file from the website which is the german version. I installed it on a XP 32 Bit machine and also on a Vista Ultimate 32 Bit machine.
In both cases the first dialogs (welcome and registration) after running the program are in Chinese language. Now, the problems are:
- Although I can translate the contents by google translator I do not register the program in this case. I don't know what is comming up after that.
- The Corel support does not do anything when you don't specify a registered product.
I am working on an AutoCAD OEM based product. I need to compare two DWG files as a part of GUI test automation. What is the best way to do it?
I have already explored Compare DWG, a third party tool available as a Menu option in AutoCAD. However, the ObjectARX library used by this tool does not get loaded onto the product under test. It gives a linker error as follows:
AcRxDynamicLinker failed to load 'C:Program FilesFurixCompareDWG 2006frxc2006_calc.arx'
I have had a request to edit an animated gif. I have done so in the past using the agif plugin.
The issue I am having is the text is so small that it gets blurry when I paste it in.
I would like to put GMC on [URL] ... to look like this [URL] ....
Is there a simple way to test whether a layer with a specific name exists?
View 9 Replies View RelatedI wanted to create an action to determine if the color mode of an image is Lab, and if so, convert it to RGB. But there’s no conditional action test for Lab color mode. The list of conditions that can be tested includes RGB, grayscale, and a couple of other color modes, but not Lab, Can I get it done with scripting?
View 3 Replies View Related