I guess state sets come from maya and in maya we can Copy render layer instead of setting it up all again and again...
How can I copy state set in 3ds max so I can work quicker? Where is copy button?
am working with a purchased version of 3ds Max 2012, and state sets are not showing up in the rendering menu. Also, there is no state set function in the 3dsmax.ini file to be set to true, which is what this link says to do initialize state set to true
It says it comes with advantage pack version of 3ds Max 2012, so are there versions without it installed?
I am trying to utilize state sets so that I don't have to re render an entire scene to change one thing. Â For instance, in the attached image, I need to keep re rendering the floor patterns. Â So I created a state set where only the floor renders but obviously includes reflections and everything else from the model. Â I am getting these black clouds showing up though that I can't figure out what it is or where they are coming from. Â
Â
I have just been turning off the other objects "Visible to Camera" Â to acheive this. Â what could be causing these clouds coming from the second floor?
clarify if State Sets work or not? Are they a non feature that should never be used?
Â
Every time I use them on any job they corrupt and loose all render settings.
Â
3dsMax 2014 sp3
For some reason, when I go to open my latest MAX2014 file... the State Sets dialog shows briefly on the screen while the file is being opened but then disappears just before the file finishes opening.
I don't use State Sets so I'm not sure why this dialog is showing.
Noticed that stats sets didnt wotk with vray properties? from kens Blog:
"Vray rendering is fully supported by State Sets and we are working closely with Chaos Group."
kens blog yesterday:
"so on some quick tests:
- all vray properties were not recognized by state sets
- vray framebuffer output paths also (only if save checked or not)
- settings on render elements also
- changes on materials also (eg diffuse color)"
"Vray rendering is fully supported by State Sets and we are working closely with Chaos Group."
[URL]
We've started using State Sets to manage the output of render elements from our scenes and all was looking great UNTIL we noticed a rather nasty bug.
I hope I can describe this clearly. Here goes:
I have created 3 State Sets as follows:
Beauty
Outputting/saving a bitmap to ".eautyFrame_Beauty_.jpg" from the Render Output 'Save File' section.
No Render Elements enabled.
Reflection
No Ouput/file saved from the Render Output 'Save File' section.
Reflection Render Element enabled and outputting a bitmap to ".RefFrame_Ref_.jpg"
AO
Outputting/saving a bitmap to ".AOFrame_AO_.jpg"
AO material in Material Override section enabled.
Exposure Control deactivated.
Now when I switch between these state sets by clicking on the green arrows in the State Sets dialogue the 'output path' from the Beauty or AO state set gets transposed onto the output path in the Reflection Render Element in the Reflection state set.
It seems that Max 'recreates' the Render element each time the green arrow for that state set is clicked and any active Render Element inherits the output path from the previously active state set.
This effectively renders them unworkable for managing Render Elements.
I've just installed the 3ds max 2012 Subscription Advantage Pack, the State Set is not showing in the Render Menu.
View 5 Replies View RelatedIs there a way to copy all the supression state of one LOD to another?
I have here some Substitutes from specifics LODs in my IAM, and i need to supress/unsupress some parts (same parts) in all my LODs. So there is my question, how could I copy one state from first LOD and then apply to all of them ?
I cant just delete and create again copying from the first LOD because I have Substitutes based on those LOD, so if I delete them iI'll get some problems here.
IV 2013
Using the Copy(multiple) command button with the following sequence (working correctly): Copy command, window objects to copy, right click to close selection, pick base point,
pick new location point(s),...right click to close the command.But sometimes it decides to do this: Using the same Copy(multiple) command button with the following sequence (not working correctly):
Copy command, window objects to copy, right click to close selection, pick base point..At this point the copy comand closes out. It has assumed a single copy, 0,0,0 base point
& tossed the copied objects out in model space accordingly. But as stated it only does this periodically.
IÂ have a button with the following actions:
Â
click:
sym.play(2000)
 ;mouseover:
var mySymbolObject = sym.getSymbol("Guns_Nav")
;sym.$("Guns_Nav").css({opacity:.3});Â
mouseout:var mySymbolObject = sym.getSymbol("Guns_Nav")
;sym.$("Guns_Nav").css({opacity:1});
Â
I cant figure out how to add 3rd action on my button, to show an active state (basically freeze the buttonts opacity until the next button is clicked)Â while this portion of the stage is being visited.
So I figured out how state set works.
Is possible enable/disable a state set everytime I change a scene state?
What are the rules for how elements (specifically, collections and other collection sets) are ordered within a collection set?
Â
I was trying to get a collection to appear at the top of the list of items in a collection set, but it seems to get stuffed below all the other collection sets regardless of the name given to the collection.
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
cs6 64bit comes with 20 history state
Â
with a computer with 16Gb and another pc with 32Gb , what value could i use?
Â
windows 7 64bit
I have an image with a long history palette. I have been working with a burn tool. Accidentally I bumped the keyboard, and up comes the image with a new History State, just the Burn Tool with the History Brush. one line. I have none of the others. So, I dump that one in the garbage can. Slight name change but still the Burn Tool Histoy State. I notice the same statement on a second bar at the top, and the same bar having the minimize etc buttons. So, I click the lower bar, now I have an image with all the history states. I save the History state version and exit that screen. Now when I open the History tab, it opens behind the image! I reopen the saved History State image, same thing. All I can do is save the work, exit PS and start it again. The behavior is normal now, but of course minus the history states.
View 2 Replies View RelatedIs it impossible to create a sub-set in the Layers Palate of Photoshop 6.0? I have a folder (set) I'm using for my navigation buttons, but want to further organize them into individual buttons. But when I try to create a new set and drag it into the existing set nothing happens.
View 3 Replies View Relatedhave they removed the layer set feature? No where do see any option for a new layer set. You could create one from linked layers before and I don't see it.
View 6 Replies View RelatedI'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies View Relatedi have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
I'm working with AutoCAD LT 2013. Just recently my layer State has not allowed me access. When I try to add a layer or edit a layer I can't get access and I get a pop-up note which reads:
"ALL LAYERS ALREADY INCLUDED IN THIS LAYER STATE. NO LAYERS CAN BE ADDED"
When I access layer states manager I can add a new layer-BUT it does not show up in Layers. Acts like the Layer State is Frozen to further modifications.
I am looking for a way to save a viewport state so I can switch between views of different parts of my drawing easily. This includes layer state switching and camera position. I have looked around on Google but cant seem to find anything. I'm after something similar to the scenes feature in Sketchup.
View 9 Replies View RelatedIs there any way to turn off the Contextual tab state. I tried changing a lot of them in the CUI Ribbon Properties from Full to Merged but now when I select anything the program slows down to a crawl. My reason is that its really not that convenient for ACA to keep switching back and forth just because I select an object. I use a lot of hot key’s but there are many commands on the Home Ribbon tab that I use 99 percent of the time at selection and I find it a royal pain in the ars to keep switching it back to get to the command I need. I’m using 2011 ACA. OS is Windows 7. 64 bit and 10 GB of Ram
View 3 Replies View RelatedWhen I restore a saved layer state in one viewport the adjacent viewport (with a different saved layer state) changes. I also don’t seem to be able to save these edited layer states so that they retain my edits.
View 3 Replies View RelatedI have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.Â
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
I recently upgraded to Civil 3D 2011 from C3D2010. I have used the same ACAD.PGP file for years that includes the shortcut C for the COPY command. Up until C3D2011 this would always allow me to copy an entity multiple times, (the default when COPYMODE is set to 0).
I am running C3D2011 64bit on WIN 7 64bit OS. It happens with other commands too that use a dialog box normally, i.e. INSERT - it only brings up the command line version of it.
I am trying to make an assembly copy as separate project using the iLogic Design Copy feature.
Everything seems fine except I do not have my involved in assemblyContet Centerparts in this copy.
I am also have no any possibility to chose the Content Center folder in the iLogic Design Copy feature as it does not showup there.
[URL]
I've been able to find very little documentation (mostly just user requests) about having multiple guide sets in Photoshop. I really think this would be a useful tool.
View 47 Replies View RelatedI need a virtual set that I can edit in photoshop, does there are any out there?
View 4 Replies View RelatedAnyone know of a way to print out a list of brush sets like you can print out a list of fonts? I am tired of having to go and look all over the place for the brush that I need.
View 4 Replies View RelatedI want to remove my brushes because i got too many.. I can't see them all on my preset list. I want to remove them out of my preset list because i allready know how to remove them one by one... but when i remove them one by one they don't get removed out of my preset list. So can someone please help me with this problem? I've allready tried to remove them out of the map with brushes but they still stay there. I've also tried with uninstalling but that doens't work either. So can someone please help me with this?? Thanks Things i've tried:Uninstall PhotoshopRemove brushes one by one [if i do so, they won't be removed out of my preset list]Remove brushes out of my Brushes map [doens't work because i remove the brushes out of my map. they stay on my list, and i can't load them anymore because i deleted them.] I want to remove them out of this list.
View 11 Replies View Related