AutoCAD Architecture :: Contextual Tab State To OFF?
Mar 23, 2011
Is there any way to turn off the Contextual tab state. I tried changing a lot of them in the CUI Ribbon Properties from Full to Merged but now when I select anything the program slows down to a crawl. My reason is that its really not that convenient for ACA to keep switching back and forth just because I select an object. I use a lot of hot key’s but there are many commands on the Home Ribbon tab that I use 99 percent of the time at selection and I find it a royal pain in the ars to keep switching it back to get to the command I need. I’m using 2011 ACA. OS is Windows 7. 64 bit and 10 GB of Ram
View 3 Replies
ADVERTISEMENT
Sep 16, 2011
I am using AutoCAD Architecture 2012. While using the hatch command, the contextual tab pulled up in the ribbon as expected. But when I went to pick an internal point AutoCAD froze. After closing ACAD and trying to open the drawing again it asked me to recover the drawing because of errors. After recovering the drawing the ribbon still had the contextual hatch tab in it although if you try and hatch ACAD will freeze again.
So as it sits now, no matter how many times you open or close the drawing the contextual hatch tab will not go away and is not functional. If you try and hatch the drawing crashes. I have duplicated the problem on multiple computers so I know its not a problem with my computer as much as it is a problem with this particular drawing.
View 3 Replies
View Related
Nov 22, 2013
I'm a right clicker. Contextual ribbon tabs pop up every time I touch an object. They require additional clicks and mouse movements. I don't want them. How can I stop them? I just want the default ribbon. I was able to do this on a previous version but now I forget how. Version upgrades do not bode well for old people.
View 2 Replies
View Related
May 31, 2010
When I edit a layer state it doesn't save any of the changes.
View 1 Replies
View Related
Sep 23, 2013
I have a button with the following actions:
click:
sym.play(2000)
;mouseover:
var mySymbolObject = sym.getSymbol("Guns_Nav")
;sym.$("Guns_Nav").css({opacity:.3});
mouseout:var mySymbolObject = sym.getSymbol("Guns_Nav")
;sym.$("Guns_Nav").css({opacity:1});
I cant figure out how to add 3rd action on my button, to show an active state (basically freeze the buttonts opacity until the next button is clicked) while this portion of the stage is being visited.
View 3 Replies
View Related
Oct 9, 2011
So I figured out how state set works.
Is possible enable/disable a state set everytime I change a scene state?
View 3 Replies
View Related
Mar 14, 2012
When I click on an array to edit it the contextual tab does not display. I am able to see other contextual tabs, just not this one.
View 2 Replies
View Related
Apr 6, 2010
I just upgraded our office from 2010 (architecture package) to 2011 and I was very excited to use the new hatch improvements, but whenever I try to use the hatch command I don't get the contextual tab. I tried playing around with HPDLGMODE, and I can get the old style dialog box, but I was really looking forward to having all that on the ribbon. I looked in the CUI and I found the hatch creation one, and it's empty. I also noticed that many other contextual tabs are empty. I think maybe it's because of some setting I had it import from my previous release maybe?
We have multiple seats where I work (I'm in charge of everything computer related) and mine is the only one where this happens. Everyone one else that I set up has the contextual tab.
Should I just reinstall it without pulling in my settings and re-build my ribbon the way I had it?
View 7 Replies
View Related
Apr 23, 2013
How do I disable the layout Tools Contextual tab in Autocad map 2013 so that is does not become active every time I change to Paper Space. I would like the ribbon to stay focused on the HOME tab when in paper space.
View 5 Replies
View Related
Mar 17, 2012
When I select a design object such as an alignment or corridor the contextual ribbon fails to appear. I'm working on C3D2012 and the ribbon has always appeared before.
View 2 Replies
View Related
Apr 24, 2013
When i click on an alignment, the ribbon tab at the top doesn't show up. Here is my cui settings for Ribbon-Contextual Tab States-Alignment single selection.
View 4 Replies
View Related
Jul 30, 2012
I would like to edit the dwt file extension in explorer to add an option in the contextual menu' to open it in acad for editing it. At the moment I can only open it, but it actually opens a copy.So I would like two options:
OPEN a copy (default behaviour)
EDIT the template (optional)
I hate the need to open a copy and then go through all the process of "save a copy as dwt".I have win7 - LibreOffice has similar options for their templates (new/open).
View 0 Replies
View Related
Apr 9, 2013
is there any possibility to use inventor commands like "AppContextual_ContinueCmd" in addin? I need to add to RadialMarkingMenu commands for continue or cancel during selection.
private void UIEvents_OnRadialMarkingMenu(Inventor.ObjectsEnumerator toEntities, Inventor.SelectionDeviceEnum toSelDevice, Inventor.RadialMarkingMenu toRadialMenu, Inventor.NameValueMap toAddInfo) { if (toSelDevice == Inventor.SelectionDeviceEnum.kGraphicsWindowSelection) { toRadialMenu.EastControl = this.oApp.CommandManager.ControlDefinitions["AppContextual_CancelCmd"]; toRadialMenu.WestControl = this.oApp.CommandManager.ControlDefinitions["AppContextual_ContinueCmd"]; } }
The menu is correctly shown , command " AppContextual_CancelCmd" send Esc to events,
How to catch "AppContextual_ContinueCmd". is this possible?
View 4 Replies
View Related
Feb 4, 2013
Is there any way to turn off Layout Tools Contextual Tab in 2013? I tried the same options that worked for 2013, but it didn't work on 2013.
View 1 Replies
View Related
Jun 1, 2012
new Array command in 2012...
On a clean install without importing the users settings, the ribbon changes to to the array menu when the command is selected but if we import settings from a previous release it doesnt work.
All the other contextual menus like text editor and hatch menus work fine, seems to be just Array (I guess because its the only new one?)
Is there a way to get it working? I checked CUI and it appears under both Tabs and contextual Tab States, the settings seem the same as the others that are working?
View 9 Replies
View Related
May 3, 2011
How do I disable the layout Tools Contextual tab in Civile3d 2012 so that is does not become active every time I change to Paper Space. I would like the ribbon to stay focused on the HOME tab when in paper space.
View 9 Replies
View Related
Dec 16, 2012
When I try to access a hatch pattern from the Hatch Creation Ribbon Contextual Tab, C3D stops working and I have to force the program to quit. I've tried repairing the installation, which didn't work. I've also compeltely uninstalled and then reinstllaed the program, and have applied the Service Pack 1 update, but the problem persists.
However, accessing a hatch pattern after using the "Hatch" command from the command does seem to work.
View 4 Replies
View Related
Jun 4, 2013
So all of a sudden my contextual menus in AI CS6 are acting weird. They always "flyout" to the right (or the direction of the arrow in the main menu), but now some of them are opening to the left. This is really annoying when you are trying to move quickly and are expecting that menu to flyout to the right. I have attached two screenshots showing the issue.
FYI. Illustrator CS 6 (Creative Cloud version) running on Windows 8
View 4 Replies
View Related
Feb 14, 2008
I've searched around and can't find an answer to this one.
What's the keyboard shortcut to access the contextual menu?
For example, when I select a text layer and press T, how can I change the font, size, anti-aliasing, etc. without using the mouse?
View 14 Replies
View Related
Oct 8, 2012
With PR4 the right click contextual menu for the timeline seems to have been re-arranged to accomodate new features.
As a result, when you right-click a timeline element to remove all effects you have to move your pointer up through a list of about 15 items to reach the "Remove Effect" command.
There also appears not to be an assignable keyboard shortcut to remove all effects from a selected timeline element. (apart from Option+Clicking on the effect in the effect bar which just removes a single item).
Would it not make sense to have this remove effect command at the bottom so that it appears right near your pointer when you activate the menu?A keyboard shortcut binding would be ideal as I realise the contextual menus are probably in a state of constant change at the moment.
View 1 Replies
View Related
Jun 15, 2012
Would love the ability to select fonts contextually. That is, I want to look at my text on screen and use the arrow keys on my keyboard to cycle through fonts (Photoshop style).
Going into a new window to select a font and then back out to view the result is absolutely maddening. Really hinders the creative process.
View 1 Replies
View Related
Oct 8, 2012
A quick question re bookmarks. My normal workflow involves working from one project folder on our server where all the rushes, edl's, artwork etc all reside. I just soft imported the rushes and added a bookmark to that network folder. However when I enter the conform module I have no bookmarks in that menu. Could we make the bookmarks global so that whichever module I am in in smoke I can see the same bookmarks, or at least make it a preference option?
View 1 Replies
View Related
Mar 28, 2013
I was having trouble with the edit sketch options coming up when I initiated a command that needed it. I upgraded to Update 2 and It seemed to fix it. But now it's happening when when I select a floor. I'm not getting the option to edit the floor. The context options don't match what I have selected. What is the problem and how can I fix this?
View 1 Replies
View Related
Jun 7, 2012
a user i work with reports that during some commands (not the same) on some jobs his contextual menu dispears.
I've already run the recommended "UIreset" process a few timesI've updated his graphics card drivers to the certified drivers for that card.he has a robust windows 7 64 bit setup. His latest example was in the DI command the context menu dispeared that lets him controls linear/alinghed etc etc.
View 2 Replies
View Related
Jan 24, 2013
I am running Windows 8. I have used multiple .NET Framework removal/repair tools, tried uninstalling all versions of .NET and reinstalling 4.0 from its official Microsoft standalone installer. However, every time I try to install 4.0, I recieve a message stating that it or a higher version of .NET is already installed.
Upon further research, I was informed that the .NET 4.5 Framework is an integral part of Windows 8 that cannot be uninstalled.
I cannot access any of the tools I need to in the program, so it is basically rendered useless (don't tell me to just use shortcuts because that is extreemely tedious and painful to make work properly, ive tried it). I have also thought about just installing Revit 11' and using that, but it is no longer available from Autodesk!
View 3 Replies
View Related
Apr 14, 2013
I am looking for the options to turning on/off contextual alternates in Elements.
View 5 Replies
View Related
Dec 8, 2013
I'm trying to locate the drop down menu for the adjustment brush, not the panel but the acutal menu that also has some Adobe developed presets (like soften skin and whiten teeth for example).
View 2 Replies
View Related
Feb 20, 2013
How do you make an image (JPEG) visible again after you turned it off with the contextural Image Ribbon Menu?
Once the image is gone I cannot find how to get the contedxtural Image Menu back.
Inventor Suite 2013 Ultimate
View 2 Replies
View Related
May 23, 2013
I'm working with AutoCAD LT 2013. Just recently my layer State has not allowed me access. When I try to add a layer or edit a layer I can't get access and I get a pop-up note which reads:
"ALL LAYERS ALREADY INCLUDED IN THIS LAYER STATE. NO LAYERS CAN BE ADDED"
When I access layer states manager I can add a new layer-BUT it does not show up in Layers. Acts like the Layer State is Frozen to further modifications.
View 0 Replies
View Related
Jun 19, 2013
I am looking for a way to save a viewport state so I can switch between views of different parts of my drawing easily. This includes layer state switching and camera position. I have looked around on Google but cant seem to find anything. I'm after something similar to the scenes feature in Sketchup.
View 9 Replies
View Related
Aug 1, 2013
When I restore a saved layer state in one viewport the adjacent viewport (with a different saved layer state) changes. I also don’t seem to be able to save these edited layer states so that they retain my edits.
View 3 Replies
View Related
