In max 2012 with latest updates as of 12/12/12 the function for seeing what faces/polys i have selected in subobject does not work. I hit F2 with no effect at all but F3 and F4 have an effect.
View 3 RepliesI was using 3ds Max 2013 without any service packs installed and my bitmap resolution on screen looked great. I have updated to service pack 5 and now the resolution looks low quality. I have to use large maps for my scenes example 12345 x 4610 px.
I have not changed the driver (Nitrous), under Display Performance I have Improve Quality Progressively and the Procedural Maps Display Resolution at 4096 pixels, and progressive display is on.
From what I've read "By default, Nitrous viewports load texture bitmaps at their full size."
How can I get the high resolution bitmap back? Is there a setting that I have missed?
I switched to MAX 2012 recently and it's hard for me to texture my models because of selected faces being highlighted red while using modifier like UVW Xform, UVW Map and Unwrap UVW.
On older MAX release when you selected desired polygons to apply UVW Map for example, faces stoped being red, now it's not and I can't see how my texture is applied on my model because of that.
How can I toggle off "selected with edged faces" in 3ds Max 2014 always on startup? When modeling, I need to see the clean surface when pressing F4.
View 2 Replies View RelatedI don't know what happened, but suddenly, i couldn't see the selected faces of the object i was modeling in my viewport, just the edges
what I want to see when I select faces is this (Minute 2) [URL] ......
everytime i start Max 2014 i had to untick the "Display Selected with Edged faces" in the viewport configuration tab...is there a way to untick this permamently?
View 3 Replies View RelatedI'm used to being able to select and hide polygons while creating models in programs like Lightwave and Modo. It is an essential function that I can't imagine Maya lacks, yet there isn't an obvious way to do this as far as I can tell. Is there a workaround?
View 5 Replies View Relatedpre 2012, if you had display edged faces on, the selected splines would turn white - so you could tell what was selected in viewport. using nitrous, this isn't possible for us. Open GL or Direct 3D work fine but not nitrous. or is this a bug?
View 3 Replies View RelatedShow me a broken-out section and what the line weight would be?
I have to show a counterbore and full thread as a broken-out section.
So it isn't a major issue but I know how measure used to show a blue line when measuring between two faces or points that it measured (by default the closest distance) but ever since installing 2014 I no longer see those lines. Any setting somewhere or if that was just removed completely?
View 9 Replies View RelatedSee attached file.
How can you do the area takeoff of only the selected faces (red area)?
Right now I have to use the 3rd party software to do something like this. I'm curious if there's a way to do inside Revit?
I received an Illustrator file in which I have to implement a translated text. I see the text cursor, but when I try to select text it disappears and I cannot see how much of a sentence or word is selected. I can delete the selection or write something else in its place, but I am working "blind" without seeing how much of text I selected until I change it or delete it. I see nothing unusual in Preferences. It is the only Illustrator file that behave that way.
View 3 Replies View RelatedI have a dynamic steel section block with a btable to choose which size member you want. What I want to know is there any way I can add a field to the block that shows the selected size so that I don't need to add a separate call up. The field would be linked to the block so if I was to change the size of the member, the field would update and no risk of someone not updating the call up by mistake.
View 3 Replies View RelatedI have a further query, when I select an object (Line, Circle, Hatch etc...) how can I set the 'Quick Properties' to automatically show for the selected item(s)?
View 4 Replies View RelatedAfter checking the box, as I paint, the red color is no longer there.
Instead, I can barely make out a very faint pink that does not appear to cover the image. It no longer paint is red.
I have closed and reopened LR and I have warm and cold booted my computer (many times). The red is gone.
Is there any way to get the broken symbol in a broken dimension like shown below?
View 9 Replies View Relatedi got Inventor recently, and i've been working on a model of a longboard just to teach myself how to use the tools in Inventor. right now i'm trying to color areas for the griptape pattern so i drew the 2D pattern and projected it onto the 3D model of the longboard. but when i tried to split the faces of the model along the projected pattern only a few of the projected lines split the faces. for other faces i kept getting these errors:
Create parting line failed Crane.ipt: Errors occurred during update Split11: Could not build this Split The attempted operation did not produce a meaningful result. Try with different inputs.
I have a little routine to add two selected numerical texts together and show the result at a selected position. I am using the entsel method to select them. I would like a way to highlight the selected text temporarily. Is this possible. The routine is as follows.
(defun c:T+ ( / Txt1 Txt2 Txt3 Pkt )
;Adds second selected number to first
(setvar "dimzin" 3)
(setq curlay (getvar "clayer"))
(setq curcol (getvar "cecolor"))
(setq curlin (getvar "celtype"))
(setq ds (getvar "dimscale"))
[code]....
i would simply like to automatically have the layer shown in the timeline as soon as i select it in the composition window. Sometimes there are so many layer that i will have to look for it. I know, i can just press p (for example) a few times and it will show. But this could mess up what i have already opened in this layer.
View 2 Replies View RelatedWhen i click on the green line has you can see on the image. The layer toolbar wont show me the right layer, like if it's not working. But i can see the right layer inside propreties.
Is there a system variable to ajust to see my layers inside the Layer tool bar?
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedI've encountered a strange issue in PSDs I've inherited from another designer.
When I have a text layer selected with the type tool active, the font size reads correctly (say, 40px). When I actually select the text with the type tool, the font size gives a strange number (say, 38.74px).
See the screenshots below:
This is on OSX 10.8.3, Photoshop CS6.
On LR 4 and now 5, the shades of grey used to distinguish the selected vs, not selected images in the filmstrip at the bottom of the workspace are too close together making it difficult to see what has been selected. Is there someway to control the color and/or the shade of grey used for each to make it easier to tell at a glance which image(s) is currently selected?
View 1 Replies View RelatedI want to use max 2012 shaded mode as a default.
View 5 Replies View RelatedIs there a way to set max to by default with shaded view instead of realistic?
[URL] ....
When shading in an Inventor 2013 idw the display shows the shade incorrectly as some kind of sky representation (see attached). I wish for this to be displayed correctly as a grayscale shade?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
With video games like Auto Modellista, and XIII (thirteen) the technique of cell shading is all the rage. Below are two tutorials I did not write, and one that I did write. I would like some feedback/ comments on the one that I did write. I posted up the two other ones because most of the people I talk to have either seen them, or know of those tutorials and have been using them as a guide. My way is not exactly cell shading just because I have been doing it so long that I have continually gotten more and more advanced until they look like airbrushed pictures. Either way, here are the tutorials.
View 1 Replies View RelatedI was wondering if there was a way to take a shaded pencil drawing and make the lines pure black in phososhop. Also I cant put color in the parts that are shaded, maybe it cant recognize the color or something.
View 2 Replies View Relatedinterface for the website I am going to make. It is going to be about RC cars/buggies/monster trucks etc etc.
And I thought the interface would be cool if it was one of the remotes and have the screen be the navagation menu and have the buttons be the links to change the screen to different catagories.
I plan to drop it into flash.
So here is my question. How hard will it be change this image into cell shaded?
I just requested some better picturs of the remote at different angels and bigger size at a forum about RC.
What is all involed in making an image cell shaded?
I am designing a site and I would like to know where I can either learn to make cell shaded graphics, or download them.
View 1 Replies View RelatedIs possible that everytime I start 3ds max,the perspective viewport will be in shaded mode instead of realistic?
View 2 Replies View Related