3ds Max :: Comparing Shadows Between Two Development Scenarios?
Jan 14, 2013
We're trying to perform a shadow impact study in NYC. We have imported the existing buildings and topography and run a shadow model with these features. We have done the same adding a new building to the model. We now need to quantify and compare the incremental shadows cast by the new building in addition to the existing shadows. Is there a way to assign a color to the shadows cast by the new building to differentiate these shadows from existing conditions?
View 1 Replies
ADVERTISEMENT
Nov 23, 2008
When I use Photoshop CS3 and paint fast strokes with a brush they update in real time. But when I do that on the same computer in Photoshop CS4 with the same brush size I have to wait a lot after I draw for my paint strokes to update. It is so slow that is simply impossible to work.
View 39 Replies
View Related
Dec 5, 2011
is there any way to compare ctb files? I know there is a tool called tableprint9.exe that will export the ctb as text but it is not working with Autocad 2010.
Is there any way to access ctb files in .Net?
View 3 Replies
View Related
Oct 7, 2008
I need to compare and match two colours but dont know how to do it exactly. the scenario is; I have two samples. Sample A is the reference, and Sample B is a trial. The trial sample is going to be very close to the reference, but not exactly the same colour.
What I am going to do is scan both samples on a scanner and then compare them. I need to find out what colours do I need to add/remove from Sample B to make it exactly same as Sample A. That is the most important bit; need to be able to understand which colours missing or needs to reduced.
Samples are one uniform colour but ideally need to get 3-4 sampling to get the average colour from each sample for accurate results.
View 2 Replies
View Related
Feb 17, 2012
Is there a way to have side-by-side two images from different folders? Say, one from 2008 and one recent? Lightroom 3.6...
View 2 Replies
View Related
Jun 23, 2012
I recently tried to compare images taken with a Nikon D300 (12.3 mgapixel-small sensor), D800 (36 megapixels-large sesnsor) and D4 (16.1 megapixels - large sensor) using the LR4.1 Compare function with not very satisfactory results (iMac 27, Lion). I took 4 images each of the same subject with a 60mm f2.8 Nikon lens on a tripod at F8, at 200,400,800 and 1600 ISO and imported the images into LR. Selecting images of the same ISO and using the Compare function, they all looked pretty much the same so I viewed them at 1:1 and 2:1 trying to get a closer look at the fine details to check for sharpness and noise. Regardless of how I cropped the images, I couldn't get any of them from the different cameras to be the same size on the screen in the closeup views. I presume the combination of sensor size and megapixel capture on the sensors caused this problem but I don't have the technical expertise to either understand (or care). Is there a way in LR to overcome these differences?
View 2 Replies
View Related
Oct 9, 2012
We will be doing some grading in a park with trees. Probably maximum depth or fill of 12 inches. The question has come up to be able to show cut and fill quantities as a visual shade of colors. I have a way to display cut and fill ticks and it will give me the value, but that's not what they want. I change the cut ticks to red and the fill ticks to green. What is the best way to represent this like when you turn on slope percentages and assign different colors. but I want like 0-2" fill to be red, 2" - 4" to be green, etc.
View 4 Replies
View Related
Nov 15, 2013
It takes a list of Parameters and cycles through the assembly looking for parts with the same parameter names. It then copies the value of the parameter from the assembly down to the part.
It occured to be that this would be more efficient if I didn't have to manually create a list of parameters to compare.
What I'd like to do is create a list of all parameters in the assembly file that begin with the prefix 'A_', and compare this list against the parameter list held in each subassmbly and part file in the assembly, copying the values down as before.how to build the parameter list?
' set a reference to the assembly component definintion.' This assumes an assembly document is open.Dim oAsmCompDef As Assembly Component DefinitionoAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition'Iterate through all of the occurrencesDim oOccurrence As ComponentOccurrenceFor Each oOccurrence In oAsmCompDef.Occurrences'check for and skip virtual components'(in case a virtual component
[code]....
View 9 Replies
View Related
Oct 18, 2012
I have a big hole in the ground in my model. Its easy to get the volume of cut with C3D. But I have a topsoil layer, weathered rock layer and then solid rock, I basically need to break them down into different volumes. The way I would normally do it is calculate the topsoil, then work out the weathered rock and minus the topsoil, then for solid rock cut I minus the topsoil+weathered rock. I have attached the 3 volumes I need for info.
View 8 Replies
View Related
Aug 31, 2007
I would like to bring a portfolio together (in hopes to get a job doing some sort of ps work). Despite having spent many years working with the program, I have little to show in terms of stuff that I think might land me a job. So my question is, what kind of stuff should go into a portfolio for photoshop? What impresses people most? Composites? Retouching? Before and After? how many pieces and format (digital cd, web, print, etc)
View 9 Replies
View Related
Jun 15, 2006
I recently got some photos developed, and some seemed a little dark so I brightened them up in PS.
I had them reprinted (by a different place) and it seems to me that the prints are almost darker now. Is it possible the prints didn't turn out right, because most of the pictures don't seem to be the brightness as they are on screen. I know in the store, the guy had problems with his pictures coming out wrong.
Besides looking at the digital pictures, is there a way to see how the prints would/should come out after printing in PS? (To be sure it's me or the shop)A sort of view, or dimensions ?
View 7 Replies
View Related
Nov 9, 2012
Light Room 4.2 Crashes. I was setting up Light Room and accidently clickede on Development. The program then crashed. I shut the program down and tried to start it up several times with the same result.
View 1 Replies
View Related
Dec 21, 2013
I have a JPG file that I've created in Lightroom from a RAW file.
My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
View 23 Replies
View Related
Aug 26, 2013
After importing to Lightroom and doing some developent changes, I decided to restart my whole Catalog. There are no XMP files for the changes I made, but surprisingly it shows after re-importing the images back into Lightroom (using "Add"), some files show as previously being edited, so now the original files (in split view) show as the last edit.
Is there any way to clear all changes made to revert back to a clean original file ?
View 10 Replies
View Related
Jul 2, 2013
The colors of my cr2 files are wrong in the developement part of Lightroom. Dark pixel are turnes into blue ones, bright/white pixels are turned into red ones.
The problem does not occur if I only watch the pictures in the libary mode
View 1 Replies
View Related
Feb 29, 2012
How to develop an Eccentric Reducer .
I want Big Id =2750 mm Small ID=1650 mm & Length of Eccentric Reducer =4400 mm Thk=20 mm
View 4 Replies
View Related
Jul 23, 2012
How to do a development of a frustum of a cone in auto cad?
I will prepare coal silo fabrication drawing in my office that is why i am asking.
View 5 Replies
View Related
Jul 18, 2012
tutorial on how to do a layout development ?
View 9 Replies
View Related
May 19, 2012
I emailed a photo from my light room and all my development panels disappeared and will not come back. What do I do to get them to return?
View 2 Replies
View Related
Nov 5, 2012
I would like to be able to apply developement settings to an image and commit to them, so that the sliders would go back to zero and I can use them again.
I know I could export a develped image, then import it and continue developing this image at its intermediate stage.
But is there a way to actually render the selected dev. settings while remaining in the develop module so that I can carry on using the sliders all over again?
View 2 Replies
View Related
Nov 24, 2013
I have been using LR5.2 successfully for a few months now but all of a sudden I cannot see the basic settings in the Development Module. Specifically, I am not able to change Color Temperature, exposure, recovery, Clarity (very important to me), etc. I shoot RAW 100%, so I wonder if i accidentally hit some wrong key to make those basic features hidden?
View 2 Replies
View Related
Oct 1, 2012
At home I still have the trial version (I wait for 4.2 to see if it will be much faster before buying it) and today I do some photo development at work (we also have 4.1 version).
What I'd like to know is it it's possible to import the processings settings of each photos to my own catalog ????
Here is how I did my work:
At home my raws are on an external USB drive and I import my pictures from this disk: path is I:Mes photos<subject + date of the photoshoot> My Lightroom catalog is in it's default path (user profile, my pictures).
At work, I put my photos on a temp director c:MyRawPictures and import them into lightroom.
Now how can I export the development settings from the lightroom at work and import them in my home setup ?
I saw a menu "import from another catalog". can I use this one ? If yes, do I need to copy the "Lightroom catalog" folder ?
View 1 Replies
View Related
Nov 9, 2012
When I import images no matter if RAW or JPG, when I go to the development module all images have various modifications on all slidedrs from exposure to saturation. I haven't changed any settings or global settings but each slider will already be modified. Previously when importing images all sliders were set to ZERO, but now all of those sliders are anywhere from - to + modification.
LR 4.2, Windows 7 64-bit, 24GB ram, Catalog has been optimized, Develop Settings and Metadata setting are set to none on import.
View 2 Replies
View Related
Oct 18, 2012
I run Lightroom 4.2 under Windows 7. All went well until this morning the development module showed a greyed out screen and LR stopped working. All other modules seem to work well. I tried a reinstallation but that doesn't work, nor does a return to 4.0 work.
View 1 Replies
View Related
Mar 21, 2013
I have LR4.3 for at least one year. He has worked correctly until 2 weeks ago. But now it is impossible to have correct color in the "development " part.
When i choose the pictures in the computer to load them, their colors are "normal" but after to have loaded them, The pictures are red, blue, green, yellowl etc without gradient (like solarization) Even if the picture loaded is in B&W.
And the "histogram" has the same colors.
When i decide to send these pictures to the computer, their colors are again "normal" (with the changes I have done) but without be able to control them during their passage in LR4.3.
Original picture:
The same in LR4.3
View 4 Replies
View Related
Jul 1, 2013
I'm been humming along just fine in Lightroom 5 until this morning. I might explain that I have been using an old iMac. The speeds been killing me so I decided to use my new MacBook Pro and get a display with it. So this weekend I set up the MacBook Pro with LR presets etc. I use an exteral HD for my photos. Since that drive was getting pretty full. I purchased a new one and copied my photos to it. In LR on the MacBook Pro, I clicked "find my photo" and it did. After that I did some editing and exporting. This morning, I couldn't export or edit in the development module. I still have my old iMac installed and I noticed I can't export from it either. Not sure what I need to do to use it.
View 3 Replies
View Related
Jul 28, 2013
I used to be able to select all photo's in the development module and then apply a preset (i.e. sharpen for faces) and it would apply to all photo's, a mass edit would occur. Now when I select all and add a preset, it only applies to the photo being viewed at that time, i can no longer do mass edits in this manner. Is there a setting I am missing which allows mass editing in Development module? I am using Lightroom 5 for Mac. I edit 100's of photo's at once, and I like to add sharpening to all at the end rather than clicking each one at a time.
View 1 Replies
View Related
Feb 9, 2012
My problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 Replies
View Related
Jan 10, 2014
How could I share development progress with multiple devices? I would like to share the library on the desktop and notebook. According to faq it's not possible to put library on a network ( I have a nas), but this would be the best solution!
View 4 Replies
View Related
Dec 7, 2013
I was eventually able to download Lightroom 5 after paying for it twice, It took over 2 hours on online chat for them to release a code to activate the download. Now that I have it i am working on a class project that's due on Monday . I was in the process of making adjustment in the Development module when it suddenly disappeared. What can I do to get it back up? I looked under "Tools" and Efit biut cannot activete any of the features that I need to work on these photos.
View 2 Replies
View Related
Feb 17, 2013
Suddenly the pallete colors disappeared from my development session. I re-started all my computer and LR, but it doesn't appear in my screen. Is it necessary I reinstall LR?
View 2 Replies
View Related
