I would like to bring a portfolio together (in hopes to get a job doing some sort of ps work). Despite having spent many years working with the program, I have little to show in terms of stuff that I think might land me a job. So my question is, what kind of stuff should go into a portfolio for photoshop? What impresses people most? Composites? Retouching? Before and After? how many pieces and format (digital cd, web, print, etc)
View 9 Replies
I recently got some photos developed, and some seemed a little dark so I brightened them up in PS.
I had them reprinted (by a different place) and it seems to me that the prints are almost darker now. Is it possible the prints didn't turn out right, because most of the pictures don't seem to be the brightness as they are on screen. I know in the store, the guy had problems with his pictures coming out wrong.
Besides looking at the digital pictures, is there a way to see how the prints would/should come out after printing in PS? (To be sure it's me or the shop)A sort of view, or dimensions ?
Light Room 4.2 Crashes. I was setting up Light Room and accidently clickede on Development. The program then crashed. I shut the program down and tried to start it up several times with the same result.
View 1 Replies View RelatedWe're trying to perform a shadow impact study in NYC. We have imported the existing buildings and topography and run a shadow model with these features. We have done the same adding a new building to the model. We now need to quantify and compare the incremental shadows cast by the new building in addition to the existing shadows. Is there a way to assign a color to the shadows cast by the new building to differentiate these shadows from existing conditions?
View 1 Replies View RelatedI have a JPG file that I've created in Lightroom from a RAW file.
My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
After importing to Lightroom and doing some developent changes, I decided to restart my whole Catalog. There are no XMP files for the changes I made, but surprisingly it shows after re-importing the images back into Lightroom (using "Add"), some files show as previously being edited, so now the original files (in split view) show as the last edit.
Is there any way to clear all changes made to revert back to a clean original file ?
The colors of my cr2 files are wrong in the developement part of Lightroom. Dark pixel are turnes into blue ones, bright/white pixels are turned into red ones.
The problem does not occur if I only watch the pictures in the libary mode
How to develop an Eccentric Reducer .
I want Big Id =2750 mm Small ID=1650 mm & Length of Eccentric Reducer =4400 mm Thk=20 mm
How to do a development of a frustum of a cone in auto cad?
I will prepare coal silo fabrication drawing in my office that is why i am asking.
tutorial on how to do a layout development ?
View 9 Replies View RelatedI emailed a photo from my light room and all my development panels disappeared and will not come back. What do I do to get them to return?
View 2 Replies View RelatedI would like to be able to apply developement settings to an image and commit to them, so that the sliders would go back to zero and I can use them again.
I know I could export a develped image, then import it and continue developing this image at its intermediate stage.
But is there a way to actually render the selected dev. settings while remaining in the develop module so that I can carry on using the sliders all over again?
I have been using LR5.2 successfully for a few months now but all of a sudden I cannot see the basic settings in the Development Module. Specifically, I am not able to change Color Temperature, exposure, recovery, Clarity (very important to me), etc. I shoot RAW 100%, so I wonder if i accidentally hit some wrong key to make those basic features hidden?
View 2 Replies View RelatedAt home I still have the trial version (I wait for 4.2 to see if it will be much faster before buying it) and today I do some photo development at work (we also have 4.1 version).
What I'd like to know is it it's possible to import the processings settings of each photos to my own catalog ????
Here is how I did my work:
At home my raws are on an external USB drive and I import my pictures from this disk: path is I:Mes photos<subject + date of the photoshoot> My Lightroom catalog is in it's default path (user profile, my pictures).
At work, I put my photos on a temp director c:MyRawPictures and import them into lightroom.
Now how can I export the development settings from the lightroom at work and import them in my home setup ?
I saw a menu "import from another catalog". can I use this one ? If yes, do I need to copy the "Lightroom catalog" folder ?
When I import images no matter if RAW or JPG, when I go to the development module all images have various modifications on all slidedrs from exposure to saturation. I haven't changed any settings or global settings but each slider will already be modified. Previously when importing images all sliders were set to ZERO, but now all of those sliders are anywhere from - to + modification.
LR 4.2, Windows 7 64-bit, 24GB ram, Catalog has been optimized, Develop Settings and Metadata setting are set to none on import.
I run Lightroom 4.2 under Windows 7. All went well until this morning the development module showed a greyed out screen and LR stopped working. All other modules seem to work well. I tried a reinstallation but that doesn't work, nor does a return to 4.0 work.
View 1 Replies View RelatedI have LR4.3 for at least one year. He has worked correctly until 2 weeks ago. But now it is impossible to have correct color in the "development " part.
When i choose the pictures in the computer to load them, their colors are "normal" but after to have loaded them, The pictures are red, blue, green, yellowl etc without gradient (like solarization) Even if the picture loaded is in B&W.
And the "histogram" has the same colors.
When i decide to send these pictures to the computer, their colors are again "normal" (with the changes I have done) but without be able to control them during their passage in LR4.3.
Original picture:
The same in LR4.3
I'm been humming along just fine in Lightroom 5 until this morning. I might explain that I have been using an old iMac. The speeds been killing me so I decided to use my new MacBook Pro and get a display with it. So this weekend I set up the MacBook Pro with LR presets etc. I use an exteral HD for my photos. Since that drive was getting pretty full. I purchased a new one and copied my photos to it. In LR on the MacBook Pro, I clicked "find my photo" and it did. After that I did some editing and exporting. This morning, I couldn't export or edit in the development module. I still have my old iMac installed and I noticed I can't export from it either. Not sure what I need to do to use it.
View 3 Replies View RelatedI used to be able to select all photo's in the development module and then apply a preset (i.e. sharpen for faces) and it would apply to all photo's, a mass edit would occur. Now when I select all and add a preset, it only applies to the photo being viewed at that time, i can no longer do mass edits in this manner. Is there a setting I am missing which allows mass editing in Development module? I am using Lightroom 5 for Mac. I edit 100's of photo's at once, and I like to add sharpening to all at the end rather than clicking each one at a time.
View 1 Replies View RelatedMy problem is, that photos are shown different in color between libary and development tool in Lightroom 3.6. The libary shows corrected color in photos, the development tool not.When I switch between libary and development tool sometimes, the development tool shows then the same colors.
View 2 Replies View RelatedHow could I share development progress with multiple devices? I would like to share the library on the desktop and notebook. According to faq it's not possible to put library on a network ( I have a nas), but this would be the best solution!
View 4 Replies View RelatedI was eventually able to download Lightroom 5 after paying for it twice, It took over 2 hours on online chat for them to release a code to activate the download. Now that I have it i am working on a class project that's due on Monday . I was in the process of making adjustment in the Development module when it suddenly disappeared. What can I do to get it back up? I looked under "Tools" and Efit biut cannot activete any of the features that I need to work on these photos.
View 2 Replies View RelatedSuddenly the pallete colors disappeared from my development session. I re-started all my computer and LR, but it doesn't appear in my screen. Is it necessary I reinstall LR?
View 2 Replies View RelatedI have an elbow with a slit on the other side and would like to use Flatten feature in sheet metal. How do I do it? I tried but an error pops-up, what does it mean.
I have attach the file.
I need to determine a limit of rock cut for a land development project. I have created surfaces for my Existing Grade and Top of Rock. Is there any way to determine the limit of rock cut within 25 ft of the existing ground, the volume of rock cut, and show the limit of rock cut on my plan view?
I could drop the Existing Grade elevations by 25 feet, but then how would I create a separate Surface from the intersection of the lowered Existing Grade surface and the Top of Rock Surface?
I have moved the library folder in OSX and then tried to start lightroom again pointing it to the new library location. Afterwards all Previews were replaced by grey squares (with color curves showing on the right, stars etc. but no image). It looks like the previews are not created but all the information are there
why when moving to the Developer rider, the Photos appear and i can work on it again. Thereafter it also appears again in the previews. S
Tried to optimize library but after 6 days of process ongoing i stopped with no changes at all to the library. Have about 60k photos in the library.I have tried the monitor settings but that makes no difference.This also happens with newly imported pictures,the ones that were appearing clearly in the library are grey at the next start of the project.running lightroom 5 with imac and latest osx.
In LR you can set the left and right panels, in the development module, to solo mode, and I think nearly everyone does. My problem is that I lose the mode each time I leave LR and have to reset it each time I enter LR. Normally the panel’s stays in solo mode and in previous versions have. I’ve been using LR since the public beta way back in 12/2006.
Why my LR doesn’t stay in solo mode or how I can get it to stay in solo mode?
I am changing computers, how I can move the development info with my master files?
View 1 Replies View RelatedLR 4.3, 59th reinstall (i lost count), standard HP pc setup, triple-core.
workflow: i develop the master to the point where i want to diverge, then create a virtual copy, finish developing and publish to hard drive. Have done this a million times, but since most recent reinstall (for a plethora of reasons, but mostly difficulties with performance and performance - and oh! performance... ;-), it publishes only the undeveloped original. I've tried publishing the master, just to see what happens, and ditto: only the unedited raw file is displaying in my published folder on the hard-drive.
i am careful to select 'Show PUBLISHED folder on hard-drive' from the right-click drop-down on the published image in the hard-drive publishing module, which in lightroom DOES reflect all changes, but the image on the hard-drive is the original raw file, renamed to the publish-service's specs.
Having to do an extra export into ps6 (which does reflect changes), and re-save for no other reason than to preserve development is time-consuming and destructive to my workflow, which is darned complicated enough as it is!
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies View Related
