3ds Max Animation :: Delayed Following With Schematic Or Wire Parameter
Mar 20, 2012
Have a bit of a puzzle that's been bouncing around a bit. Is there a way to delay a object following it's parent for a few frames? For instance, I have a hook attached to a crane that rotates around, the hook following it around. If I could have it follow the crane at a bit of a lag, allowing the cable to curve slightly, it would look a deal more real. I know I could hand animate it, but is there a way to set it up so that the hook will follow the crane after a delay of say, 10 frames or so?
View 1 Replies
ADVERTISEMENT
Nov 28, 2011
I try to wire the length parameter of a taper object to the local Y-Position values of another object. It works fine until I reload the file. I get an MAXScript Wire Controller Exception error:
--Runtime error: Illegal self-reference in controller script
...and the parameter-wire dialog opens. The desired functionality returns by clicking the Update Button and everything works fine again.
View 1 Replies
View Related
Oct 11, 2012
I have modeled a car and rigged it fully with roll, till, steer, and wheels spinning. Then I realized that my steering wheel wasn't involved in the animation and when I linked it's rotation to the rotation parameter of the steering wheel to the x position of the steering rig (the red circle in front of the wheels) the steering wheel rotates in a rather bizarre way. So I tried everything I could find on the net to solve this problem, from turning the rotation from Euler to TCB (that didn't work), then I added a dummy into affect and that didn't work either.
I rotated the dummy inline with the steering wheel and aligned it's pivot points to the steering wheel, the wheel seems to rotate nicely when I rotate the dummy. But it all falls apart once I link up the steering rig to the dummy.
Also to note, it seems impossible for me to select the "wire parameter" option from the steering wheel, it seems I have to originate this link somewhere else to the steering wheel for the link to be made possible. Could it be because the steering wheel was a different file and merged in later on?
View 9 Replies
View Related
Jan 30, 2013
I would like to add tree parameters to this part. One is a wire diameter. Another should be the length of the wire. The last should calculate the weight of the wire. Then I wish to set the mass of this wire part equal to this last parameter. Is it possible somehow?
View 3 Replies
View Related
Nov 28, 2012
i'm in action schematic and if i reset any node (for example images/surface) then some parameter is still not affected. For example : the blend type and surface type and couple more are not affected by that reset function. Is this a bug ?
View 3 Replies
View Related
Dec 19, 2011
I got a deadline for my project, but I got a big problem:
"I cannot set the "parameter" for the End Value in Parameter Animate dialog"
For easy understand, let's see a example:
1. I got a part which has two parameters named: "A" and "MaxA"
2. I animate Favorited parameter A.
3. The End Value is MaxA_ (Everything is ok)
4. I finish Studio environment, then I change parameter MaxA_ from 200 mm to 400 mm
5. I turn back to Studio environment, the End Value now is "200 mm" (I want this will be MaxA_, so I can animate the flexible parameter).
show me how to keep the end value will be "MaxA_" after I change parameter?
View 3 Replies
View Related
Feb 25, 2011
Im trying to wire an object's Z position to a custom attribute. I've frozen transforms, but whenever i wire the zero euler Z position to the attribute, when i control the attribute, i notice that my object is moving relative to world, and not to its position.
I want to move it along its own Z axis, not world axis.
View 2 Replies
View Related
Apr 7, 2011
i'm trying to use the wire tool deformer to sculpt some mouth shapes on my character but when i turn the wire tool on the faces of my mesh around the mouth area dissapear,I can still see the wireframe but the faces dissapear, I tried to turn down the dropoff distance attribute but to no avail.
View 6 Replies
View Related
Jan 24, 2012
I'd like to make an animation of a thin copper wire being wound onto a pulley. Is this possible in Inventor? I'm not sure Inventor will allow the thin wire to be bent. I can imagine other ways to make the animation, but I'd much rather have the wire bend around the pulley as the pulley rotates.
View 1 Replies
View Related
Jul 9, 2012
In Ken LaRue's demo (see attachment B), theres a lot more option for you to tinker with in CFX.mine (see attachment A) only stops at 'timing' option. what do i need to do to view the rest of it?
and because i cant view the rest of the option, i can't change CFX schematic view to Action schematic view.
View 2 Replies
View Related
Sep 7, 2011
how to draw the intersection wire like a half circle passing over the other wire.
View 9 Replies
View Related
Sep 19, 2013
how to mesh wire together in a pattern on a pole of say 60mm diameter and 1 metre length?
View 9 Replies
View Related
Feb 8, 2012
The reaction manager is an extremely cumbersome way to map one parameter to another, especially if you want a precisely defined mapping curve.
In Cinema4D (a program I'm learning at the moment) there is a range mapper node that can use a spline as mapping curve to map an input parameter to an output parameter.
Is there a way in Max to map one parameter to another using a precisely defined curve?
3D Studio DOS to 3ds Max 2010
Windows XP 64
NVidia Quadro FX 3700
Dual Quad Xeon, 6Gb Ram
View 6 Replies
View Related
Oct 31, 2011
i'm rigging a character and i want to create an custom parameter for my rig's controller that save a lot of time for animators; "transform to zero" is one of most useful command in animating, take a look at my screenshot
now my question is how can i create an custom parameter like "button" under my controller parameters or in attribute holder that run a simple code/script for me like transform to zero script: macros.run "Animation Tools" "TransformToZero"
View 1 Replies
View Related
Jan 16, 2014
I used to do this all the time. Now I cant remember how to do it properly, if possible a screenshot of how to do the maths in the Parameter wiring box. Getting the circle to travel along this line without scripting.
What should have been a 5 minute job has turned into about an hour.
View 2 Replies
View Related
Oct 27, 2011
I want to create an custom parameter like "button" under my object parameters or in attribute holder and i want this button run a simple code/script for me.
for example: linking Box1 to Box2
$.parent = $Box002
I know how to work with "wire parameter" and "parameter editor" but the problem is that i cant find any way to tell them to run this script with that parameter.
View 1 Replies
View Related
Nov 8, 2013
I have an assembly inside of Inventor Studio. One of the parts inside of the assembly has a parameter that I would like to animate. When I select the "Parameters" function within the "Animate" tab on the ribbon, I get an error:
"There are no favorite parameters defined."
This worked fine when I tried the same thing with only the part inside of Inventor Studio, but not when the part is included inside of an assembly.
View 3 Replies
View Related
Sep 24, 2012
I have not recently been saving my metadata to file. I decide to turn this option on in preferances and it took a while for it all data to be written to the files. Most of my files start in Lightroom and get worked on with Photoshop layers, saved as TIFF, and reimported into Lightroom from other folders. My question is, if I went back to Lightroom and made some changes to develop settings to see what it would look like with different settings in Lightroom, didn't use the settings in the previously exported file but left them there in Lightroom since the file had already been exported and saved as TIFF..... can now saving the metadata to file change the way the finished file looks since the settings are different than those originally used to process the file (of note, I do not have save develop metadata to file for TIFF, PSD tyurned on).
View 1 Replies
View Related
Jan 3, 2012
Just started using 2012 and noticed a delay in the mouse in the drafting space only. When I hover over the icons, the speed is normal, it only occurs in paper or model space.
View 4 Replies
View Related
Jan 20, 2012
We are having an issue while inserting blocks from the tool palette. Inserting a block from the tool palette takes about 5 seconds per block. Pick a block, wait 5 seconds, pick insertion point. Last week it took maybe 1 second. It doesn't sound like much, but we use alot of blocks everyday, and waiting 5 seconds every time gets annoying. Especially when it used to be almost instantaneous. We also have our blocks in our template. The template is on the server. If you type insert, and insert the block that way, it loads fast, like it used to using the tool palette.
Most of the blocks are simple text or shapes. None are dynamic. We also have some hatches in there, that are unaffected by the delay. They insert quickly.
Another thing has changed. The time it takes to change to a different tab on the palette has grown. A tab with about 10 blocks used to take about 6 seconds to load, now takes a good 30 seconds. And a tab with about 30 blocks that used to take about 12 seconds, now takes about a minute and a half! Once the tool palette and each tab has been opened for the first time, say first thing in the morning when cad is first opened, the delay is gone. They switch between tabs with no delays.
The only thing that I know of that has changed that coincides with this is last week we made a few changes to the template. We removed a few sheets that we no longer use. Could this have done something? The blocks are still in the template. We have 3 pc's that are affected in the same way, at the same time.
I've tried a few things to remedy this. I am by no means a cad guru. I created a .dwg with all the blocks in it. Made another tab on the tool palette using the blocks from the .dwg. Still the same delay. I tried creating a new palette using the design center and the blocks .dwg I made, but cad locks up on me and I have to restart cad. I tried that twice.
View 9 Replies
View Related
Aug 26, 2012
Okay so I downloaded some brushes and then my photoshop cs6 started to work a lot slower and it just wasn't working right at all. So I deleted the brushes but it didn't change.
So basically the problems are when I try and use a brush the brushing is delayed and when i switch tabs it won't let me back onto the program and when I try and make a simple picture with just text and a photo and then try and save for web this pops up 'This image exceeds the size Save for Web was designed for. You may experience out of memory errors and slow performance. Are you sure you want to continue?'
View 3 Replies
View Related
Dec 21, 2012
I am testing out ACAD LT 2013 I've narrowed it down the the hatch. why theres no issue with Autocad LT 2010 using the same hatch pattern. Tried making the adjustments. Turning off the hatch is really working the best
Running Win 7 , 64 bit quad core AMD 2.2 gig processor
4gig ram
Gigbyte MB with on board graphics
View 3 Replies
View Related
Jan 19, 2012
We are having an issue while inserting blocks from the tool palette. Inserting a block from the tool palette takes about 5 seconds per block. Pick a block, wait 5 seconds, pick insertion point. Last week it took maybe 1 second. It doesn't sound like much, but we use alot of blocks everyday, and waiting 5 seconds everytime gets annoying. Especially when it used to be almost instantanious. We also have our blocks in our template. The template is on the server. If you type insert, and insert the block that way, it loads fast, like it used to using the tool palette.
Most of the blocks are simple text or shapes. None are dynamic. We also have some hatches in there, that are unaffected by the delay. They insert quickly.
Another thing has changed. The time it takes to change to a different tab on the palette has grown. A tab with about 10 blocks used to take about 6 seconds to load, now takes a good 30 seconds. And a tab with about 30 blocks that used to take about 12 seconds, now takes about a minute and a half! Once the tool palette and each tab has been opened for the first time, say first thing in the morning when cad is first opened, the delay is gone. They switch betweeen tabs with no delays.
The only thing that I know of that has changed that coincides with this is last week we made a few changes to the template. We removed a few sheets that we no longer use. Could this have done something? The blocks are still in the template. We have 3 pc's that are affected in the same way, at the same time.
I've tried a few things to remedy this. I am by no means a cad guru. I created a .dwg with all the blocks in it. Made another tab on the tool palette using the blocks from the .dwg. Still the same delay. I tried creating a new palette using the design center and the blocks .dwg I made, but cad locks up on me and I have to restart cad. I tried that twice, same result.
We are running AutoCAD Civil 3D 2010 on Vista Business 64bit.
View 5 Replies
View Related
Dec 23, 2011
I have user parameters that are no longer needed and are not being used anywhere. They each takes 4-5 seconds to delete, prior to 2012 this would happen instantly.
IV2014 SP1 64bit
Dell Precision T7500, Geforce GTX 480, DirectX11 306.97
SpaceExplorer 4.04, 3DxWare 3.12.2
Twin Intel Xeon E5506 2.13GHz, 12GB RAM, Win7 Pro SP1 64bit
View 6 Replies
View Related
Dec 1, 2013
I need to use the dimension created by an action-parameter as a variable in a user defined function but AutoCAD will not allow me (see attached).
How may I access the action-parameter's dimension ?
View 1 Replies
View Related
Feb 7, 2012
it is possible to use a user defined parameter to drive a action parameter.
I have several polar and linear stretch actions i would like to drive from one parameter.
View 3 Replies
View Related
Oct 2, 2012
I need to convert a model parameter to a reference parameter thru the API.
I saw this item discussed in the group before, but I cant find the thread.
View 4 Replies
View Related
Nov 26, 2012
i can import the .psd using mediahub or desktop import or in action bin, i can use 'import' node. But i want to spot importing psd file directly from cfx schematic using 'read file' node in I/O tab. I will get one single file . I believe this node is containing multiple information (channels/layers). How can i extract the layers from that node ? how can i make this node usable since i can't make any connection to other node. Like in Nuke , there's a node named 'shuffle' which can extract or pull out a selected channel/layers from a single node. How to do this in cfx schematic ?
Talking about 'shuffle' node in Nuke. Is there any node similar to that? so the node not only can pull/extract channels but also can 'shuffle' or re-pipe the channel . For example pipe chan Red to chan Green, or Alpha to Red etc. What is the best way to do this ? do i have to use CC module ? any similar node in cfx schematic level?
View 2 Replies
View Related
Oct 2, 2013
Now if only I could make my electrical schematic drawings in Inventor and not have to use Autocad Electrical. When will this be possible?
View 1 Replies
View Related
Sep 16, 2013
IEC schematic symbol in icon menu is absent. There is just JIC symbol library. Even there is no IEC folder in "Autodesk/Acade/Libs" folder. It contains folder named: Hyd_Iso125, JIC1, JIC125, Panel, Panel_mm, pid, pneu_iso125.
View 1 Replies
View Related
Mar 28, 2013
I'm in CFX in the Modilar Keyer. I loaded a setup previously with GMASKs previously applied on a HD shot. I now need to scale the GMASK for a 4K HD shot (200%). I was told to go in the GMASK schematic (the one that looks like action) and add a parent axis to move all the masks at once. WHen I'm in GMASK schematics I don't have access to a node bin. Where do I add an AXIS to parent all my masks in there?
View 1 Replies
View Related
