how to simulate with vector tools the objects which are far?
In the attached file I tried to reproduce a photo, the right one is the result but the hills are not finished. It is a general perspective principle that the farer objects are more blurred, but I am not sure how to draw that. As a first solution sure could be adding feather them, the most to the farest, but somehow does not like that. T
Farer_objects.xar
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
Don't know what I did, but things are all askew now.
View 1 Replies View RelatedUsing Xara Photo & Graphic Designer 7 7.12.19319
I can't get the sub menus to show in my left main tool bar.
In past versions all I had to do was click on the little arrow and I was shown a choice of sub tools.
Is there something I have to do now in "Options"?
Up in the Xara Xone a discussion cropped up that started us talking about the eraser tool. So I thought I'd get a thread going here where everyone can share tips and tricks regarding the eraser and the shape builder as well
The eraser tool is available in Designer Pro X, and Photo & Graphic Designer 2013 And the Shapebuilder is available in Designer Pro X
To start things off here are a couple of handy tips:
You can force the eraser to produce an opacity mask and non destructively edit vector shapes in two ways. 1. set some softness or 2. group your vector object with it's self.
You can use the H key to toggle the node view on and off . If you have Designer Pro X the shift key toggles between the shape builder and eraser tool for handy editing.
Is there any way to convert graphics to vector (.xar)?
For example I would like to convert this picture to vector so that it does not loose quality when I export to PDF for printing in high DPI.
[URL]
Been trying to create a vector of a sundial but not having much luck.
View 8 Replies View RelatedI've been experimenting with a different custom layout. I split my most used tools into two floating palettes configured in double rows, one for drawing tools and one for photo tools. I turned of the tool bar and parked my two custom palettes on the left in its place. I've done away with the flyouts and I always use the mouse to zoom and pan so I didn't need those tools. Web design tools I keep up top along with a few custom buttons for things like toggling the rulers and the handy wrench for bringing up the options palette. Now I just have to try and remember where I put everything
Anyway to get set ups to include some of the new tools? Do you customize your workspace? which buttons from the button palette do find most useful? As I already mentioned I always add the wrench for one click access to the options. I also add the convert to editable shapes button. Here is a screenshot of my new set up. (My galleries aren't missing I have a second monitor and I keep the galleries stashed on there.)
I am having difficulty creating the attached 3D business models in vector and struggling with the perspective and angles, both are proving challenging. I initially started by creating a cross hatch grid and rotating it 45 degrees but its not looking right.
View 3 Replies View RelatedI want to get some designs I've done printed, the design are pretty simple block colors and shapes, Xara Xtreme 5 is brilliant for doing these designs. However the T-Shirt printers (spreadshirt) want to files a vectors graphics. This is what they say on the site
Transforming objects into curves
Transform all design elements and text into curves.
This is possible with Corel Draw: highlight the part of the design you want to convert. Click on 'set up' - 'transform into curves'.; You may run into a few problems when converting complex pixel graphics into curves. Try to convert as few individual objects and colors as possible. Note: vector graphics for plot printing can have up to three colors per design.
Check the minimum size of the object
After you've converted to curves, you'll have to check every element of the design to make sure that it has a minimum size of 1.5 mm. One trick for checking this: create a small circle with a diameter of 1.5 mm and lay it over the smallest parts of the design. If the area is smaller than the circle, it's too small for plot printing.
Save image as vector graphic
Unfortunately, you cannot just open a pixel graphic into a vector program and save it in a vector format (.eps.) This is not enough. You have to manually make sure the pixel graphic has been converted into curves.
Can I just export as an .eps and it'll work, or do I need to convert to editable shapes then export?
I use Xara Photo and Graphic Designer 2013. Is there a way to export vector graphics (obviously) to DXF or DWG format?
View 2 Replies View RelatedI make simple line drawings for my work but I also use some photographic models too. I was trying to figure out how to use the bitmap tracer to get a better vector line drawing for my patterns.
View 1 Replies View RelatedI have a LOGO that is vector, a software where im using LOGO says that for best results I must export my LOGO to JPG, at least 300 dots per inch and must be GrayScale.
Now, my LOGO is already black and white, do I have to select somewhere GrayScale to export with that optsion selected or I just export to JPG regular way since LOGO is already BW?
I have drawn a colorful graphic with lots of little pieces, colors. Didn't name colors in it or built it with tints/shades of other colors. I want to make it grayscale now. What is fastest/most practical way to do that? Histogram works on bitmaps but I would like to retain vector format.
View 3 Replies View RelatedAny outline world maps that are actually editable in DP7? I found some but several countries could not be filled with colour.
View 6 Replies View RelatedXara Designer Pro has an impressive-looking import format list, but I'm suprised to see that it can't import .svg files.
The reason I would like to open an .svg file is that there is an awesome new resource being built up of symbols called the noun library. [URL] All the files are in .svg format (which I'd imagine was intentional to ensure that lots of folks can open them. Check it out - they're trying to raise $ on kickstarter to enable the growth of the library.
How to make a vector shape appear distressed or cracked in a natural-looking way? The best example I can think of is the Chickenfoot logo. It is a simple 2-color logo and looks nicely aged. I've been thinking about this for a while, but can't decide on an effective approach to achieve it.
[URL]
using Xara to make cartoons and illustrations for sale on microstock sites such as Dreamstime, Fotolia etc. Would the files produced by Xara be acceptable for these sites? (they seem to be fairly heavily biased towards illustrator, as far as I could make out). And is it worth trying to make a few bucks this way, or is the market already oversaturated?
View 2 Replies View RelatedWhile teaching Photoshop in a class of mine, I noticed that in CS6 vector object's colors remain unaffected by the main color controls, and we have to switch to the object selection tool to display the color controls in the properties bar.
Now, this feels very, very disjointed - why would one introduce such a disconnect in the overall user interface? Why not just use the ordinary color controls? I mean, trying to pick up the color from a bitmap layer for a vector object takes five steps now: select object with object selection tool, click on the fill button in the properties bar, click on the color picker, then we can pick up a color from the image, and finally click to confirm. And the color change only gets applied after clicking "okay". No realtime feedback. Have to repeat the last three steps again and again to test for different colors.
The Color swatch palette does not work either with vector objects. Nor the eye dropper tool! Quite a bad workflow, or am I missing something here?
I compare this to Photoline, where the overall color controls govern all types of objects, including vector layers and bitmap layers the same way, and with instant feedback. Photoshop CS6's color picking workflow for vector objects looks extremely convoluted compared.
Has this workflow been improved at all in Photoshop CC?
the printing press for signboard is looking for an vector of my design there are waiting for me right now. I send them the .eps format. I use pen tool for making different curves and shapes. How can I make it to a vector?
Here is the .eps file
[URL]
Units of objects from the tools palettes, I’m wondering in which unit does the objects of the tool palettes are inserted. For example, as my drawing unit is meter, I need them to be inserted in meter to fit well with my drawing.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am running Photoshop CS6 and cannot get the 3D elements to work? I have followed the available tutorial on the Adobe site on how to make 3D type and it doesn't work. It just isn't highlighted as a feature. Does the 3D feature work with vector objects (elements)?
View 6 Replies View RelatedIn all my previous programs I have managed to change the default to no fill effect in a vector shape, the default in X6 is a fill effect even though there is no colour so as long as the shape is on top you can click anywhere and it is picked. I can't find where to change this to empty space.
I am sure it must be in front of me but I just can't find it!
Is there a way select all the vector objects in a document, or conversely, to select all the raster objects in a document?
View 4 Replies View RelatedI have created city/landscape artwork using photoshop line and box tools. If you go to URL... then click on the link that says (click here to view Gotham City) you will see one of the images I am talking about. Can this image be made to look the same in vector.
View 7 Replies View RelatedHow do I select a vector object whose property has been set to invisible? I am using PSP v7.04
View 2 Replies View RelatedI am stunned that CD still does not have feathering of vector objects-- Why would this be???? Is there a workaround?
View 10 Replies View Related This is my first post in the Corel forum and I hope I did it all right here:
First Bug -> In my last contest work I've tried to embed many transparency effects. While I designing my graphic I've used (among many others) a transparency effect that named »Behind« (in my German version of CorelDRAW it's named »Hinter«). I've applied that effect to a texture bitmap graphic and it worked correctly so long the bitmap overlaid a vector shape in an ordinary way. But after I include the bitmap into the vector shape (using the vector shape as a Power Clip) obviously the used transparency effect conflict with the anti aliasing function of the vector shape and the smooth margins of the vector shape turned into rough boarders and the vector shape looked like a bitmap in a poor resolution. I guess it is only an indication error in CorelDRAW but for a designer's eyes this bug is very disturbing and should be corrected by Corel!
Second Bug -> Often I use CorelDRAW for vector illustrations and that's why I have to integrate scanned sketches (JPEG format) to build vector illustrations bases of it. Here we have another indication error or better to say a performance problem of CorelDRAW. While I using the sketch image in extended view mode the zoom function of CorelDRAW works correctly and pleasant fast. But if I switch to simple contour mode the performance of zoom mode of CorelDRAW worsens rapidly. The performance of my computer is not the problem with this because my hardware is on a high level and I use an well arranged and clean Windows 7 operating system. It would be nice if Corel is able to fix that problem because it disturbs the work flow enormous and it minishs the fun that I have while I'm using CorelDRAW!
I'd like to start utilizing Illustrator more frequently for web and user interface design projects, but I still like taking everything into Photoshop for final rendering and compositing (and the simple fact that most developers want psds, not ai files). However, I find that the only way to successfully transfer all of the vector artwork from Illustrator and preserve it as vector objects in Photoshop (when exporting) is to manually convert every individual vector object in Illustrator to a Compound Shape (by selecting the shape and clicking Make Compound Shape from the Pathfinder palette menu). This can be very tedious if it has to be done after the design is complete, and very inefficient if you convert every object as you draw it.
Is there a way to set Illustrator to automatically create every vector object drawn as a Compound Shape without having to manually convert it?
Adobe Illustrator allows you to export your Illustrator document as a Photoshop document. However, Compound Paths (not Compound Shapes - see this article for not-so-great explanations comparing the two) – which is the default attribute applied to all of Illustrator's basic vector objects – do not convert into vector objects when the exported document is opened in Photoshop. Rather, the vector objects drawn in Illustrator get flattened into raster layers in Photoshop, making them poor candidates for refining the design in Photoshop.
When we try to open smart objects from within Photoshop CC, they're looking for Illustrator CS6. On machines where Illustrator CS6 is uninstalled we get errors. All the file associations in Bridge are correctly set. Is there a way to change the file associations for smart objects?
View 2 Replies View RelatedPs CS6 v13.0.1
OS X 10.6.8
Problem: Ps CS6 incorrectly renders vector objects pasted from Adobe Illustrator. CS5.1 does not exhibit the problem.
Below is screenshot of artwork in Illustrator and which is copied to clipboard, followed by screenshot of "Paste as Smart Object" in Ps CS5.1 then screenshot of same paste in CS6. "Paste as Pixels" gives identical good rendering in CS5.1 and poor rendering (gray pixels which should be pure white in this example) in CS6. This is repeatable with other artwork.
Several weeks ago there was a complaint in this forum that Photoshop CS6 poorly renders vector artwork that is pixel-aligned in Illustrator. The Adobe response was that Photoshop is correct. Strange that CS5.1 can render pasted vector artwork perfectly and only CS6 makes a mess.