I have an EPS file (attached) which is giving an error when importing into Xara Photo & Graphics Designer 2013.
Other EPS files from the same source have no problem.
Any program they can try opening it in and see if they can save it in a format that Xara will accept (assuming there isn't a more fundamental problem with the file) ?
I have over a hundred gif images to load into xtreme pro 6 but each time I do they come in with different sizes, however, they were all the same height when exported from excel (they are different lengths).Is there any way to get them all to the same screen resolution and hence make the heights the same for all images? I would rather not have to do each one manually.
View 3 Replies View RelatedI scanned a document and saved it as pdf, then i tried to import/open it with xara photo & graphic designer 7 and i got an error saying that "this page could not be imported"
could it be from the scanner itself such as restrictions from settings ?
Tried importing a TIFF into P&LD9.... get Serious Error...Access violation exception at 0x0AD4CD36 Tried again...same result..
View 3 Replies View RelatedI am using xara xtreme 4, i always used it to import large A1 size pdf files to resize them with xara on A4 page. I am trying to import now a 50 mb pdf file, after asking me if i need to optimize for editing i click import, it shows that it is converting the document then it asks me if i need to merge or insert to a new page i click merge and finally nothing shows on my sheet, still empty!
is there a better way to resize that pdf file?
I am trying to work out the best way to import a word document into Designer Pro 6 and am struggling.I have a 21 page word document which is formatted text only i.e. no graphics included. I have exported this from Word as a RTF file. I now want to import this into DP6 so that I can use the power of DP6 for embedding all the graphics that I want.
Ideally what I would like to be able to do is to set-up a page with a text area, import the RTF document and insert it into the textarea and for DP6 to create the following pages with flowing text areas. I don't seem to be able to do this.
I think I must be missing a trick as in Gary Bouton's excellent book on Xara Xtreme 5 he says in the section on "Pouring Text into the Layout" (Page 198), that "Xara automatically adds pages to a document to handle text that won't fit on a page.".
Now that I've learned to isolate part of a photo using the mat, when I exported what I cut out it was tiny. My original photo was thousands of pixels wide. It reduced the cut out area exported to about 200 x 300 pixels which was a tenth of the size. I read a recent post on importing at same size using the utilities menu and clicking the last bitmap option to import at same dpi, so I did that using another photo so the utilities menu would show, then closed that photo and imported my photo again. But when I exported it to jpg it was tiny again. I checked to see the option in the utilites menu was still set. Is there a limit to picture size? I like to work with large photos so they print well as giclees and photographs. why I can't import and export at the full size .Am I having a problem because the dpi of the original is 72 dpi?
View 2 Replies View RelatedHow do I go about adding a new font to my list of fonts. I need the font "TrashHandRegular". It doesn't appear in my list of fonts.
How would I import or add it on?
I am moving over from CorelDraw 12 to Xara Designer pro but have lots of file I would like to import into Xara Designer.
I have tried varios methods but cannot get it right - is it possible to import files & layers from CorelDraw 12 on Xara Designer?
importing photos into Xara 7 - the photos have a "green" sheen to them - I've only noticed as I've been using xara to print out some photos for a friend who's printer died. he uses powerpoint to print his and the difference between the two is really marked! i'm assuming it's due to CMYK/RGB differences (ppt is RGB) but I can't for the life me see where I can alter the Xara settings so the photos come in as per ppt.
View 8 Replies View RelatedWhen I import, or drag and drop, photos they are reduced to 400x300 pixels even I chose "Import as original, which was 3445x2584. So, when export the image back as a JPG all I get is the reduced image. how can I keep my original image size?
View 3 Replies View Relatedwhy I am all of a sudden getting issues with importing CMYK images as per the enclosed, and how can I get around this?
Xara CYMK issue.doc
Using AutoCAD 2013 and a basemap that was created in an earlier version of AutoCAD (likely 2002), the coordinates of points exported from surveying equipment are changed when imported into the basemap. Why would the coordiantes be changing when placed on a basemap?
View 1 Replies View RelatedI a GPS device that plugs into my laptop and I need to get the coordinates into my draw in cad?
View 3 Replies View RelatedI am trying to import a CSV file in AutoCAD 2014 but cannot find proper function. Is there any automatic function that will do it for me or I have to create some kind of tool to accomplish that task?
View 6 Replies View RelatedIs there command, or lisp to import saved UCSs in 2013?
View 3 Replies View RelatedI have a drawing with 72 layouts in it. I also have two drawings with one layout each, that I want to appear in the first drawing. How do I import the layouts from one drawing to the next? I found, "to import layouts as sheets", but it does not seem to be what I need.
View 6 Replies View RelatedWe have maya 2012 and autocad 2013. Does direct connect 2011 allow you to import autocad dwg files into maya? If not, has Autodesk updated direct connect as a maya/autocad plug in so we can use dwgs between the two programs? I can't get support to answer this, they keep saying "we monitor the forums, ask there." So, here goes! Autodesk ought to take a lesson from zbrush, who imports/exports with one button now!
View 4 Replies View RelatedA consultant working in PowerCADD 2000 sent me a DXF converted file. I have tried opening it in all CAD versions with no success.
I attempted converting it in word to txt file and then back to DXF but still no luck.
Importing SAT files has an error trying to open multiple files using the Select Additional SAT Files for Import Button.
Work around is to import using 2012, save and open in 2013, but have not fully tested. Have not tried yet using a 2012 max file as an xRef in 2013.
Can I import KMZ files into AutoCAD Civil 3D R.2013, or do I need to purchase an add-on package that will make it work? Does it work with just AutoCAD Map 3D?
If not, how do you import KMZ files into AutoCAd Civil 3D?
I have an image that I need to export as a PNG with a transparent background.
In PGD 2013 it works fine - PNG is saved with a transparent background.
However, in PGD 9, it saves with a white (non-transparent) background.
There was a warning dialog about transparency pop up the first time I used PGD 9 to export the PNG, but I can't remember exactly what it said - something about transparency not supported for this type of file I think. I chose to ignore always and I can't find anywhere I can re-enable that option to see if it fixes things.
I've been trying to import a Solidworks file (.SLDASM) into AutoCAD 2013. The documentation says this is a valid file type, but it doesn't seem to work The import process completes, but the following message appears: “Import failed. The specified file is invalid or unsupported.”
View 6 Replies View RelatedI have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
View 7 Replies View RelatedI just installed 2013 on my pc yesterday. The first task I was given was to import a Google Earth image into AutoCAD to try to get some dimensions on a house for an exhibit. I open Google Earth and set my location to import, then I go to the Render tab, select Set Location, I click Import the current location from Google Earth, click Continue, then i get an error message saying Class not registered.
View 2 Replies View RelatedI have been working on a drawing that was originally created from an AutoCAD 2004 version, and I have since been working on it in AutoCAD 2013 student version. The drawing from autoCAD 2004 was of plans for a house and i saved them over to model them in autoCAD 2013.
I have since finished the model and tried to import the drawing into 3Ds max 3013 cersion and a message reading "ObjectDBX Classes" appears. I have read up about this and tried to download an AutoCAD 2004 ObjectDBX Classes Object enabler. I am unable to download this as I do not have a copy of AutoCAD 2004, this is only available at my work.
I only have AutoCAD 2013 and 3Ds max 2013 on my home computer, not at my work.
Can you import files from autocad windows 7 (using mac w/ bootcamp or parallels) to sketch-up and photoshop on Mac os x 10.8.5? If so, what is the easiest way to do so? Also, would Parallels or Bootcamp be better for going between the operating systems?
View 3 Replies View RelatedI have issues when importing Pro Engineer files in Inventor 2013. Importing the same models in Inventor 2012 works fine.
View 9 Replies View RelatedHow can I import an ESRI shape file in 2013? Are the map commands no longer available?
View 3 Replies View RelatedWe have a big problem on several PC's with Acad Map 3D
if the users import their old (Acad 2010 Map 3D) files where symbollists and view settings are stored.
After a restart of Acad it hangs up with following Errors (See attached).
We can solve this issue temporary with restoring the defaults.
So the problem is importing old files so i think it is not campatible with this old acad 2010 files.
Is there a way to import such old files?
I have been trying to install the Eye Candy plugin but cannot get XPGD 2013 to recognize the plugin.
I ran the Alien Skin plugin and pointed it to the Plugins subdirectory under the Xara program folder. What the heck am I doing wrong?
I have run the install procedure several times but the Plugin never shows up in XPGD. When the install asked for the folder I pointed to the Plugins folder under the Xara Picture Editor folder under the Xara software folder.
It never shows up when I click on the Live Effects drop down list.
I am running Windows 8 and do not have any other programs like Photoshop.