Xara :: Failed To Read XAR File
Sep 28, 2011Xara photo & graphic designer 7 on Xp.And it wouldn't let me load one up from Backup just kept saying "Failed to read XAR file(Failed to read record 4625 65535). Lost a few Hours Work.
View 9 Replies
ADVERTISEMENT
VideoStudio :: Error / Failed To Read DVD Information - Report ID 0x80040901 (2305)
Sep 11, 2011I recorded a few short children's programmes from the TV on a PVR and transferred them onto a DVD. The DVD plays perfectly on my computer. I had hoped to edit the programmes a bit (cut out adverts etc) but when I try to import the DVD into VS I get the message "Failed to read DVD information. Report ID: 0x80040901 (2305)". Presumably this code has a very specific cause. I am using VS11 on a Vista computer.
View 7 Replies View RelatedXara :: A Read Error Occurred
Feb 16, 2007IM having a problem with my xara file... it gives me a read error occurred.. i tried to solved it but i failed, although i can see it in preview and no change in file size..
View 9 Replies View RelatedPhotoshop :: Paint Cannot Read File - Not A Valid Bitmap File Or Its Format Not Currently Supported?
May 25, 2013Have some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported." Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
AutoCAD Visual LISP / AutoLISP :: File Is Not Read Only / And Permission On File Appear To Be Just Fine
Aug 20, 2013(if (findfile MyFile)
(setq fl (open MyFile "a"))
)
the file exists however the open function still returns nil... the file is not read only, and permission on the file appear to be just fine.What other reasons would there be that cause open function to return nil?This is happening only on one machine. All the others are writing to the file just fine.
Photoshop :: Error Message :: This File Contains File Info Data Which Cannot Be Read And Has Been Ignored
Feb 8, 2009After I save a file for "Web & Devices," when I open it, it returns this message, "This file contains file info data which cannot be read and has been ignored." Will this cause any problem with the file once I place it in the website I'm building? I've never seen this message before on a photo I've edited. The changes I made involved color correction.
View 9 Replies View RelatedPhotoshop :: Error / The File Contains File Info Data Which Cannot Be Read And Has Been Ignored
May 31, 2012We have been sending images out to contractors, and sometimes when they come back the files are having this error:
the file contains file info data which cannot be read and has been ignored
When I then try to Photoshop Script the file info it throws errors.
3ds Max :: Revit File Failed To Load
Sep 27, 2012One or more dimension references are or have become invalid.The Revit file failed to load.
View 1 Replies View Related3ds Max :: Error / File Open Failed
Apr 14, 2011After a system crash, I was unable to open any of the autoback files. I get a "File Open Failed" error.
View 5 Replies View RelatedAutoCAD Inventor :: Failed To Publish DWF File
Jan 17, 2012I can publish my assembly to a dwf using the express option, but can't using the the custom or complete options.
I have gone into the sub assemblies and tried to publish from them - 2 of them work 2 of them give the same error message.
I then went into their sub assemblies and was able to publish them (so that's 2 levels down now).
I have used rebuild all - working my way back to the top level assembly.
I have some sheet metal components in the various assemblies.
AutoCad :: Drawing File Has Failed To Open?
Jul 7, 2011my drawing file has failed to open. when i try to open i geta feedback of drawing file invalid.i need this drawing before saturday 9th 2011.
View 4 Replies View RelatedAutoCAD Inventor :: Macro Failed When PDF File Is Already Open
Sep 17, 2013I created a macro for generate a PDF drawing, but when one file has been already created, AND he's already open, the macro don't work.
How to stop the macro automatically and notify that the macro has been stopped because the file is open.
Below, the current macro :
Sub PublishPDF()'Get the PDF translator Add-In.Dim PDFAddin As TranslatorAddInSet PDFAddin = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}")'Set a reference to the active document (the document to be published).Dim oDocument As DocumentSet oDocument = ThisApplication.ActiveDocumentDim oContext As TranslationContextSet oContext = ThisApplication.TransientObjects.CreateTranslationContextoContext.Type = kFileBrowseIOMechanism
[Code] ....
AutoCad :: Inserting PDF File - Failed To Create Object
Aug 7, 2013Is there a way to import a pdf file into ACAD? I have tried inserting an OLE image but I get an error "Failed to creat object. Make sure the object is entered in the system registry."
View 8 Replies View RelatedAutoCAD Inventor :: Failed To Create A New Study File In 2012?
Oct 29, 2012I would like to report on a latest problem i encountered.
I dunno why, but when it started to run a part fill analysis, Inventor prompted me that it ""Failed to create a new study file".
I tried restarting inventor and still, nothing happened. Moreover, i tried another file and it worked. How come for this part it didnt?
Photoshop Elements :: Organizer Failed During Folder / File Move
Nov 9, 2012I have a large image collection, in excess of 40,000. I'm running on a PC with Windows 7 and all updates installed. I just purchased PSE 11 to replace PSE 10. After installing PSE 11 I converted my catalog. That seemed to go OK. At that point I discovered that my C: drive was almost full so I decided to move my image collection from its C: drive location to an external hard drive that had sufficient capacity. In order to ensure the integrity of the catalog I decided that I should use the PSE 11 Organizer to move the files. This would allow the Organizer to update the location information for the files as it moved them, although it was clear that this would take many hours to complete. So, using Organizer I did a "drag and drop" of my image collection's root file from the C: location to the external drive which happened to be the J: drive. Organizer appeared to be running properly so I left it to continue overnight. The next morning I discovered that only about 2/3 of the files had been moved. There was a very cryptic message that said the opertion could not be completed because of "possibly unsupported files types, files with read only attributes.." etc. I did not write down the actual message and it did not tell me where in the transfer the failure occurred. After doing some detective work I discovered that many folders and files had been copied to the J: drive that were not appearing in the Organizer catalog and consequently were not being displayed. Some folders had only a portion of their files copied. Fortunately, the files were still visible and cataloged on the C: drive. I did look at my files on the C: drive and there were some that for what ever reason had read only attributes.
The selected file, files, or folders should be copied to the specified destination. At that point they should be added to the catalog, then the files should be deleted from their original location and the catalog updated accordingly. If an original file is read only then it can't be deleted but the attempt to delete it should be reported as an inability to delete with no consequences imposed on the files that have been placed in their new location. The "problem" should not be promoted to the status of a serious or fatal error that causes only partial completion of the overall operation.
VideoStudio :: Render Video To A File - Failed To Open MPEG Encoder
Jun 28, 2011Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
Maya Modeling :: Taking UV Snapshots - Failed To Open Output File
Sep 18, 2011When i am taking uv snapshot, an error is seeing.
Error: Failed to open output file: E:WORKSMayaMaya WorksSwordimagesoutUV.jpg
AutoCad :: DWG File Is Currently In Use Or Is Read-only
Dec 19, 2011Using AutoCAD LT 2006 and ADT 2007
Dedicated in-house file server on the LAN.
Save a drawing, and close AutoCAD.
Open drawing on another computer, and it says file is in use, and asks if I would like to open as read-only.
The problem is consistent, and happens even if I wait a few minutes to open the file after closing it on the other computer.
VideoStudio :: X4 Unable To Read Its Own AVI File?
Apr 18, 2011After extensive editing I saved the result as an avi file. When I tried to open the newly created file I got the message:
File format mismatch. [1081.1.3]
I have many other video playback programs and, with the exception of Real Player, they all can play back this avi file I had just created with VS Pro X4. The Program GSpot finds no problems with the file.
Emails to Corel remain unanswered and telephone support held me waiting for hours, only to disconnect when it was their quitting time.
Photoshop :: Read/write Psd File From App Other Than...
Nov 2, 20081) Can I use photoshop SDK to build independent desktop app (not photoshop plugin) to read/write/edit psd file? If yes, is there any license rule I must follow?
2) Can I use photoshop API to build more module to read/write/edit psd file,
then use this core module to build complete web-based app with wonderful flex as front-end and that core module is back-end?
If both above 2 items it not capable of implementing, is there another way to build independent desktop app or web-based app for read/write/edit psd file?
AutoCAD Map 3D :: How To Have DWG File And Make It Read Only
May 30, 2012Is there a way to have a .dwg file and make it read only? i want to have my files protected so no one can alter them once i hand them over to consultants to view.
View 9 Replies View RelatedAutoCad :: Saving File As Read Only?
Jan 14, 2013What's the easiest way to save my file as read only?
AutoCAD 2010
AutoCad :: Opening File / Read Only
Dec 14, 2012I installed AutoCAD 2013. I have done a few projects on it and everything worked fine. But today after getting a project part way completed I saved it and closed it, then moved on to something else. When I came back to it to work on it some more, it told me that it was in use and that I could only open it as a "Read Only".
It was not open by anything other CAD pragrams or anything. What is the problem here.The only way it seems I can work on it again is to do a reboot. I dont want to do this all the time.
why it is only telling me I can open it as "Read Only" when it is not opened by anything else. But it tells me it is in use by another program.
Lightroom :: 4.4 - File Cannot Be Read When Go To Develop
Apr 22, 2013I have mac OSx 10.7.5 and have just upgraded to Lightroom 4.4, now all my files when I go to develop say 'file cannot be read'
To be honest I am getting quite cross with LR4, I also have issues importing images from 5DmkII and 6D
Files live on a DROBO ext drive.
AutoCAD Inventor :: Change Library Content Centre Status From Read Only To Read / Write
May 4, 2012How to do it?
I am using Inv/Vault Pro 2011.
CorelDRAW X4 :: DWG And DXF File Version - Read And Output
Jan 27, 2008what version on dxf/ dwg does X4 read and output? I have ver 12 and am thinking about upgrading to latest, but still working through the changes.
View 7 Replies View RelatedAutoCAD Inventor :: Unable To Read SAT File
Jul 23, 2012I have a couple of SAT files exported by my colleague. He is only familiar with and only works in AutoCAD 2008.
All I'm trying to do is convert them to IGES for our customer, but I can't even open them. I get the message "Unable to Read SAT File" in Inventor. I tried Fusion as well, it just crashes out after working for a few seconds. When I try to open the original dwg in AutoCAD 2013 I get a message that the file is corrupted and to run recovery on it. I tried doing so, but then the dwg comes in with no model geometry.
How to open these files or any other workflow? We're going to have serious issues down the road if we can't move data between AutoCAD and Inventor.
AutoCAD .NET :: Read Data From A DWG Excel File Using C#?
May 18, 2013this dwg file data reading with c#?
View 9 Replies View RelatedAutoDesk Smoke :: Cannot Read Any File To Load
Jul 24, 2012I've downloaded and installed the Smoke pre-release trial 2 on Mac Pro Mid 2010, 32 GB DDR3 ram, ATI Radeon HD 5770 1024 MB, Mac OS X Lion 10.7.2 .... but it can not read any file to load...it only black csreen appears?
[URL]
AutoCAD .NET :: How To Read / Extract User Name From DWL File
Sep 21, 2012If a drawing is opened by another user, I want to retrieve the name of that user. I presume that is in the dwl locking file. I I can't find any info on this topic. How do I read/extract the user name from a dwl file with .NET/c#?
View 2 Replies View RelatedAutoCad :: How To Create Read Only DWG File / Watermark It
Jan 17, 2013I have an Autocad drawing that I would like to take to a CNC machine to have it physically built out of extruded polystyrene. I do not want my drawing to be used without my permission or modified.
Is there a way to watermark it or to transform it to a read only file allowing the cnc machine to extract its parameters but not allowing any action upon the file (copy,modify et c.) ?
PS: I have started building my own DIY polystyrene cutting tool out of an old soldering pistol, piano wire,vice, clamps... but it will take some time before I finish building it and there is a chance I might mess up the first few shapes; I need the shapes as soon as possible.