Xara :: Constructing Text On A Curve
Oct 22, 2012I am trying to construct text on a curve by writing it on a circle's circumference, but the cirlce fills and so overlays any predrawn items beneath it.
View 4 Replies
ADVERTISEMENT
Xara :: Select Both Circle And Text Arrange / Fit Text To Curve
May 22, 2012Using: Xara Photo & Graphic Design 6
AMD Athlon II X2 255 Processor 3.10 GHz
2.00GB (1.75 GB usable) RAM
64-bit OS
I follow the tutorial in the Xara Help, but cannot get the results shown. I draw the circle, compose the text, and set it to the middle Select both circle and text Arrange/Fit Text to Curve....the text appears around the lower, right side of the cirle After all this I am unable to manipulate the text (It's a piece of cake to do this in Publisher 2010, but it has some minor problems in appearance)
Xara :: Fitting Text To Curve
Jan 19, 2011When I fit a line of text to a curve, it never quite 'fits.' The text is always skewed across the curve, instead of being 'on' the curve. Is there a way to fit the text exactly on the curve/line?
View 3 Replies View RelatedXara :: Text Following Curve With Upright Letters?
Nov 20, 2012Just right now, I can't find a possibility to attach a text to a curve with upright letters.
View 9 Replies View RelatedXara :: Text To Follow A Radius Using Fit To Curve
Nov 3, 2011i've been using xara pgd for a few months now and absolutely love it. massive jump up from my old program which was very limiting (graphic design is a hobby / business necessity, not my full time gig).
so my first question to you good peeps: i've been trying to "bend" text to follow a radius using 'fit to curve' ... this has been problematic as the text wants to align itself at the end of the curve rather than the middle.
is there another way to bend text to a specified radius?
Xara :: How To Curve Only Two Corners Of A Rectangle
Jan 24, 2011I cant see how to do this but there must be a simple way of doing it. Howe do I have pointed corners for the top left and top right then curved bottom left / bottom right of a rectangle that I create. I tried unlocking the shape but it still seems to do all or nothing. Am I missing something obvious?
View 9 Replies View RelatedXara :: Rotate Along Curve Is Not Active
Aug 13, 2011I have a blend from a small rectangle with 5 steps, so in total 7 small ones.
Beside I have drawn a circle, and so selecting the blend, with shift click also the circle, I would like with Blend Tool apply the Rotate along curve function.
But somehow that is not active, only the Fit Blend to curve, but would need rather the rotate.
what it depends whether the Rotate along curve button is active in Blend tool?
Xara :: Making Curve With Smooth Join
Jul 21, 2013The outline of this small fish drawing on paper, it seems with one continuous curve, so in XDPX9 that should be logically with Smooth joins and Making curves
Smooth_join.xar
According to your experience is there maybe some tactic where to put the control handle points? At the curves or rather where the line is straight? After around some minutes probably in any way can be drew around, I am searching the logic rather which decrease that time.
Xara :: Trim Parts Of Curve That Go Beyond The Shape?
Mar 25, 2011see attached picture, is it possible to trim the parts of the curve that go beyond the shape? In a CAD programme you can just trim these away and join whats left to form your shape.
By the way i am trying out the trial of Autodesk sketch book designer, (not to be confused with sketchbook pro). it has vector graphics in it and has some neat ideas xara could benefit from. Check out the video, i like the direct transformable fills. also the way lines are handled.
[URL]
Xara :: Function To Align A Group Of Objects Along A Curve
Dec 22, 2013Have I missed function to align a group of objects along a curve, like text along a curve, or there is not such function?
View 2 Replies View RelatedRevit :: Constructing An Arch?
May 13, 2012I need to construct an arch in revit but Ive only been able to make a curved beam in the wrong plane. Whats the best way to make an arch so that it would look like a straight beam in plan view?
It needs to connect to ground level in two places and have a specific height if thats relevant.
CorelDRAW Graphics Suite X4 :: How To Curve Text Within Paragraph Text Block That Is Predefined Shape
Apr 28, 2011how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
AutoCAD LT :: Constructing Floorplans - Area Calculations In M2
May 6, 2004I am relatively new to AutoCAD LT and I am constructing floorplans and measuring the area in m2. My problem is that my areas are not adding up correctly. We are investigating possible future redesigning of units, and although the outer boundary of the building is the same, when I add up the individual units this total area does not add up correctly. While trying to figure out what was going on I traced one unit exactly on another layer and compared areas between the two identical polygons....and they have different areas!?!?!?
View 5 Replies View RelatedAutoCAD Inventor :: Constructing Line Segments Across Circle?
Nov 25, 2011Trying to get evenly spaced line segments that lie on the circumference of a circle - every time I do the pattern repetition it gives me line segments the same length instead of constraining them to the circumference of the circle ?
View 1 Replies View RelatedAutoCAD Inventor :: Constructing Ribs Along Dome Surface?
Nov 25, 2011Trying to get ribs / fins constructed along the surface of this dome - like them to be evenly spaced and follow the angled plane above. Any thoughts on best way to build this ? Repeating patern doen't work because width of fin changes for each iteration across the dome.
View 2 Replies View RelatedLightroom :: Constructing Keyword Hierarchy From A Flat List?
Apr 22, 2012I have Lightroom catalogue of approximately 3000 images, all of which are keyworded. Up until recently, it was possible to have a hierarchy of keywords and now I want to contstruct one from the flat list.
View 1 Replies View RelatedAutoCAD 2013 :: Constructing A Grid (centers) With Letters And Numbers
Mar 4, 2013Constructing a grid (centers) with letters and numbers,I follow to set a grid for a plan (All what I need here is a lisp file that provides serial numbers and letters for the grid):
-Grid (centers) are provided to the existing columns
-Circles are plot at the end of these centers to accommodate labels
-Numbers & letters labels are provided
-Numbers and letters are edited to put them in serial order. Here is the issue, as serial number and letter is done manually, then this is a source for errors!
The attached lisp file does do this sort of work but doesn’t allow choosing the direction of numbering lettering! In the same plan, if I need to have the numbers to start from right (instead of starting from left) then this is impossible using that lisp. This is the only part of the code that needs to be enhanced. Also, the “auto number” command does the same thing but work with numbers bit not for letters.
AutoCAD Visual LISP / AutoLISP :: Constructing Infinite Lines By Selecting Objects?
Aug 12, 2013Is there way that by selecting objects (Lines,Pl) it construct infinite lines ?
View 3 Replies View RelatedPhotoshop :: How To Curve The Text
Nov 24, 2013Windows 8 64bit, Ps CC
how to curve text so that it looks like the one in the bottom of this picture?
i want to remake this image but i cannot figure out how to make the same curve of the words: MEDICAL ASSOCIATION.
i have tried creating a Path with half of a similar oval and then used the Type on a Path tool and i have tried using the Pen to draw a Path but it looks aweful and of course i hae tried the Warped Text tool but the only option for what i need is the Arc Lower which doesn't give the result i need no matter how i adjust the tool.
AutoCad 2D :: Text On Non-arc Curve
Sep 14, 2013I'm drawing a steam locomotive builder's plate which is elliptical in shape (240x150mm) and I'm having trouble trying to get text to follow the profile of the ellipse. I've tried using Express>Arc-aligned text, but when I click on the curve the command line keeps telling me to select an arc. I've tried separating the upper half of the ellipse from the lower, but I still get the same "Select an arc" instruction. Here's a typical elliptical plate:
Hunslet Plate.jpg
Is it possible to create text as in this plate?
Xara :: How To Make Non-rectangular Text Boxes And Color Fill Text Box
Jul 17, 2013Is there a way to make non rectangular text boxes in Xara designer? Say I have a star shaped object in the page and I want the text INSIDE the star.
Also, is there a way to color fill a text box?
Photoshop :: How To Do Curve Text To Another Layer
Nov 16, 2013I have a layer of a music staff with wavy lines. I want to create a new text layer to go on the staff and curve exactly to the lines in the staff. I've tried curve, warp, distort...all of those, but I can't get it perfect. Is there any way to curve a layer exactly to another layer?
View 1 Replies View RelatedCorelDRAW X6 :: Import PDF Text As Curve
Aug 26, 2012When we import a PDF into Draw, there will be a "Import PDF" pop-up asking whether we want to Import Text As - Text or Curve
Very often when I choose "Curves", it still prompts me for font substitution, while I expect whatever embedded fonts in the PDF will be converted to curve during import.
I wonder how this option is suppose to work.
CorelDRAW X3 :: How To Make Into Text From Curve
Feb 7, 2013I have done one brochure, but in that i have made all the text in curve,but now i want to make it on a text. how can i make into a text from curve.
View 1 Replies View RelatedPhotoshop :: Text Written On A Curve?
Jul 17, 2006I have PS cs (not cs2) and need to create a logo that follows the curve of a line....so it ends up looking like a half smile......i do not want to "warp" the text, but have it follow a curved line...
View 1 Replies View RelatedPaint.NET :: How To Distort Text Into A Curve
Nov 5, 2012I cannot figure out how to distort text into a curve to achieve a similar result to this Lucasfilm logo:
Hopefully I haven't overlooked a tutorial here somewhere - I've searched but not found anything. I'm guessing this'll have a really basic solution that I've missed completely...
Paint.NET :: How To Create Text Along A Curve
Jun 18, 2013I need to create text along a curve. Is there a plugin for that? I will have a graphic in a circular shape and need text at the top and bottom to be curved to follow the circular graphic.
View 2 Replies View RelatedIllustrator :: Text Following Ellipse Curve?
Jan 22, 2014So I have a friend who creates business cards and logo's with elipses and she's running into a problem. She has currently got the trial version of Illustrator CC and while she can create the elipses just fine, she can't seem to get the text to follow the curve.
She does have the right tool correct? Illustrator can do what she wants it to do correct? If so, is it an issue of usage ignorance or could it be that the trial simply doesn't have this feature?I recommended the Illustrator as the right tool but I want to make sure it will do what she's wanting to do.
Xara :: Convert Text Line To Text Area
Jul 15, 2011(Using XDP7)
I endlessly find that I have text line objects which I later wish had been proper text areas (because I want to control the size of their bounding box, for example).
Is there any sensible way to convert a text line object into a text area object - it's a bore to do it by creating a new text object and then cutting and pasting the text, and it is seemingly a trivial thing for the software to do automatically.
Alternatively, is there an option (perhaps a hidden one) to have all text objects created as areas rather than lines?
Xara :: Change Alignment Of Text Within Text Area
Nov 26, 2011Is it possible to change the alignment of text within a text area?
By default the text is located top left. Horizontal justification can make this top center or top right, but how about bottom left / center / right or even middle left / center / right?
VideoStudio :: Curve Title Text Around Item In Pro X6?
Aug 10, 2013Is it possible to curve title text around an item in VSP X6? What I'm trying to do is have a rainbow fade into view and curve a title around the edge of the rainbow.
View 2 Replies View Related
