I have VS X2 (sp1 & sp2 installed). I am trying to convert videos from an uncompressed AVI format to something of reasonable size.
Unfortunately, the original source of these videos only output at 1080i, so EVERYTHING (including some only NTSC standard def videos) is upscaled to 1080i format.
Problem #1: the up-scaled NTSC 4:3 videos are full top-to-bottom screen, with the expected black-bars on left/right. When I try to write them out in any VS X2 output format, they end up getting an additional black border all around, as if they are being shrunk. The pixelation is horrible (it's not like their quality started out good). What I'd really like to do is just get them converted to standard def with NO borders.
Problem #2: even native HD captures (mostly 1080i) end up with a small black border as if they've been slightly shrunk / scaled.
I have tried the CROP and the PAN/ZOOM filters and cannot find a setting or combination that makes these full-size, no-border.
I have thousands scans of text (greyscale TIFFs on white background) that need cleaning up. Each scan has tiny black spots throughout the page, which cause unacceptably "dirty" prints. The only method I know is to select areas between text manually and hit the delete key - which takes about 30 mins per page! There must be a way to select an entire page and remove black spots of a certain size in one hit.
I used a video light in lower light conditions to take an HD video (in AVCHD) which will be rendered to PAL SD DVD. Unfortunately the main speaker has red eye. Can my VSP x3 remove this?
I am trying to export a DWG as a WMF in AutoCAD LT 2008. Every time I export it, whether from model or paper space, a black border is placed around the exported image. Is there any way to get AutoCAD to stop adding this border?
I was opening it in Adobe Illustrator to delete the border and exporting as a WMF from AI. However, this last export was distorting the image i.e. in AutoCAD the distance between points A and B were equal, but in AI the distance between A and B were NOT equal. It is critical that the image is not distorted in any way.
It must be a WMF because it is being used by a piece of software my coworker is coding. The software cannot handle any other vector graphic formats. A vector graphic is necessary because the software has a zoom function.
Finally, I cannot use BetterWMF or anything similiar because I am unable to install software on my work computer.
I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
I used Photoshop CS3 to create a coupe of boxes in black, nothing fancy, just pure black boxes as for background stuff for a web page, and then saved it for Web through photoshop whereby the html and images are created. Opening the html in dreamweaver appears ok until i add a dark background and white "strokes" appear on my boxes drawn using PS.
I just got downloaded GIMP about 3-4 days ago and I've been having some beginner problems. I can't figure out how to add a black glowing border around the signatures I've made.
For an example : [URL]........
[URL]........
(2 of 4 signatures I've made). I wanted to give each of the 2 a glowing black border or some kind of border like one of these:
I just clicked on the "font" icon...and placed some text on an image. "Now" I'm trying to figure out how to get rid of the back and yellow cropped line around my text.
I have some small rectangular drawing of different sizes (about 3" x 4" or 5" at 200 pixels/inch). I want to place a simple solid black line border around the edge of the canvas. These drawings have a white background.I do not want white showing past the outside edge of the border.I want the border to show with an even smooth width on all four edges of the drawing.I want to specify the color and the width of this border. Here is what I have unsuccessfully tried: Using the Rectangle or the Line tool on a layer assigned for the border is a hit and mostly miss proposition.
For the Rectangle tool, once the rectangle is placed on this layer, I do not know how the adjust this rectangle. I erase the rectangle and try again. Sometime what I see is okay, but most of the time what I see is irregular and poorly positioned. For the Line tool the lines drawn often show as a stepped line, not a single width line. I do not know how to not have these steps occur, and I of course do not want curved lines. Can you instruct me about how I can create a simple solid black line border around the edge of the canvas?
I'm using Elements 8 on my Win 8 laptop. And recently I always get a black border around the videos. I don't know what settings I should change to get rid of this but I looked everywhere.
I have created a solid white image on a "transparent background." The problem is it comes with a small black border around the image. How can I remove it? I'm hoping to put it on a t-shirt - almost like it's screened. I've attached a copy of the gif.
I'm being really thick here and don't actually know the correct term for it, but I've lost the black line that used to be around the outside of opened images in Photoshop (CS5 to be exact)
I am creating a peice of artwork in illustrator. I have cut out the icecream image in photoshop and placed it in illustrator as a psd file. It looks fine in illustrator, looks like it should do. The problem occurs when I export to pdf, a black border around the ice cream image appears. However when I print the black border does not display. So the issue with the black border only appears on the pdf. Check out the attachment beow for example of what I mean.
Okay I'm making an image and I want to create a black border around a freely drawn selection but then feather it in so the opacity of the black border starts at 0 and ends at 100. How would I do this?
I'm printing a letter size document from illustrator at 50% size. All pages have a white background so I would like to have the document print with a black rule/ border around it so I can tell what it will look like. Is there a way to do this without manually putting a rule around all 25 existing artboards? Or is there a way to do this in the Acrobat pdf I'm outputting from this doc?(CS5)
Problem: My artists are telling me that they are experiencing a transformation of their text when they try to do a mirror. We do a process called sublimation that requires us to print our artwork backwards, and when they perform the mirror operation occasionally the text either crunches together from left to right, or stretches out in the same direction.
The mirror also chances the size of shapes, overall it seems to be an issue with the Mirror action. So far the only effective way to fix the problem is to restart the PC. I have asked them to try restarting CorelDraw alone, and will see if they works next time.
I am having trouble with the geo marker and the geographic settings. the file given to us has a pre defined grographic location, (which is incorrect) which is making the file zoom out a lot further than desired. I change the geographic location and the position of the geo-marker, but when I use zoom extends, it still zooms all the way out to the undesired distance. There is no "space junk" out that far, so I do not know what else it can be.
Currently developing a GUI, I'd like to remove the grips on selected objects when I launch a function from a toolbar. I have the classical ^c^c at the beginning of my scripts, but it doesn't seem to remove them, although pressing 2 times the esc keys does it...
While adding a vertex to a survey figure, if I click too near (like within 0.5') a survey point, the new vertex snaps to the survey point and uses its point number as the new vertex. Is there a setting for this snap feature to turn it off or change the tolerance?
I can’t put a border around an overlay track clip once it has been rotated. If I put a boarder around an overlay track clip prior to rotation then it is removed upon rotation.
When using fade to black in the options panel there is an option to select color. So I could use fade to white etc i spose. This option is grayed out though. how I can activate this?
I would like to add more to the white background to make it bigger without having to stretch it and distort the image.
I want to place a circle shaped outline border around the original image with a set border thickness and color and be able to crop/remove the portion of the image beyond the outline, changing it from a square/rectangle image to a circular image.
If I am not able to change the drawing to have a round outer border from square, how can I make the outer parts past the newly created circular outline transparent?
I've just downloaded VS11 plus TBYB and now I`m trying to make some DVD disk. All is o.k. but i can not see the disc preview.All i see on the black "preview window" is the record "Press "Play" button to start preview" .After i press the button i see the progress bar shortly and nothing more happens.
When I add pre-keyed clips (MOV files PNG coded) with alpha-channel (straight) in an VideoStudio X5 overlay track - the transparent parts show up black.
To make them transparent, I have to key-out the black with chroma key. I don't get this.
All of my transparent parts show up black, both in the video preview window as in the thumbnails of my video folder window.
Is there a setting I should apply to have the transparent parts show up transparent - as they should?
