VideoStudio :: DVD Burner Is In Use For Another Program Error
Aug 21, 2012
I was using VideoStudio 4 for about a year, then upgraded to 5 Ultimate last week. Was in the middle of a project when I upgraded, and decided to burn a DVD last night.
DVD burner is in use for another program error (or something like that)
I've never had this error in my life, and I've been using the same laptop for about 3 years, with 2 or 3 versions of VideoStudio.
Should I just uninstall 5? Or can I "restore" my computer back to two weeks ago?
The file I was working on, I also saved as a VideoStudio 4 file in case 5 doesn't work.
I didn't uninstall 4 before loading 5. I tried to uninstall 4 last night, but it didn't uninstall all the way. Maybe if I reload 4, then uninstall it?
I can't think of any programs that use the burner that I use on that machine either.
I really need to make a DVD by saturday--it's my fiancee's bridal shower. The one I tried to make last night was to test it and make sure it worked on my future sister-in-law's TV before the shower. But that didn't happen unfortunately.
I have a problem with VS X3 due to the fact that the burner crashes. I have made some DVDs with it previously. I have loaded VS X4 trial version and that will burn the DVD. I do not feel that I should buy the new version just to get the burner. The error message is:
Stopped working
Problem signature: Problem Event Name:APPCRASH Application Name:BurningApp.exe Application Version:1.0.0.50 Application Timestamp:4b293ba0 [code]...
I am using the trial version of vx4. All is ok until I go to the create dvd page. The burner drive has no device listed. Create to disc is shaded out. I am able to burn discs with other programs.
When I go to burn a disc I get "The burner is busy for another application". If I restart the computer it works fine, but it is annoying having to do that. Videostudio 11 didn't do that.
When trying to burn DVDs, I am getting "The burner is busy with other applications" I dont currently have any other applications using the E drive. I did use it previously to Lightscribe several discs but quit that program.
Is there something in the system tray that I need to delete as a project not completed? I do not know how to clear out this problem. Maybe something not finished from Lightscribe?
I bought the VideoStudio x5 yesterday. When i try to open the program, a message appears:
The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis
I thought i was getting this message when i enabled ripple select all but now i am randomly getting this message anytime i am using VS. I use VIDEOSTUDIO PRO X3 and i believe i have updated the necessary updates for it . After i get this message, it shuts down VS and i have to restart the program.
Projects do not finish burning to DVD. After I have finished editing my video I try to create disc using DVD format. Project completes video rendering but doesn¡¦t complete writing to disc. It stops half way. Then a message pops up saying ¡§The burner is busy for another application.¡¨ I press ok and another message comes up: ¡§The drive is busy or is being used by other applications. Please make sure the drive is ready, close all applications that may be using the drive (including folder windows), and try again. [534:-2147216300:0]¡¨
Drive: External drive Samsung SE-S204S USB CDDVDW Video Studio 11 Plus
I have made sure no applications are open and the drive works fine with other software. I have included Print Screen shots of when I encounter the problem.
I get it on closing the Video Studio Pro 14.1.0.107.(S.Pac 2) I initialy got it when trying Corel's trial download so went and bought the Package, retail, thinking (foolishly) that that would solve the problem. I have spent hours on line with Corel Tech who said it was a conflict with jscript.dll in Explorer 9. I reverted back to Explorer 8 but no luck. It makes no difference whether V.S has files active or not so it is not a function of source files.
As youcan see on my profile - Windows 7, Home premium; 3.2 Gig Intel Core2 Duo; 3518 MB RAM; 500 Gig HD; 1024 MB NVidia GT 440 Video card.
I'm having a hard time creating MP4 HD files. It's always gone well, but recently it seems that I get to around 99% rendering, and then it crashes. I get the message "The program has encountered an unspecified error and has stopped functioning"
I'm running an older dual core intel T2080 CPU with Vista, nothing fancy. It seems to happen with videos that are around an hour and a half. If I keep my videos to around an hour it will complete the rendering process. I am able to see the final 8GB file that was created, but it won't play as the rendering wasn't 100% finished with the longer video. This whole thing happens on different PC's so it's not my program installation.
I have reinstalled this program 3 times arlready and the Auto Music feature still does not work? Every time i make a project and want to add some music off the Auto Music feature the whole program crashes instantly? I keep getting over and over again, Unspecified Error? Everything thing else works in the program except the Auto Music.
When I use the quick selection tool (or when I use content-aware scaling) I get an error message saying "could not complete your request because of a program error." I am working with NEF files, 4 GB of RAM, fast machine with plenty of scratch space, Radeon X1950 crossfire graphics card. With small .jpg files, the problem doesn't occur.
I have been re-saving many of my PSD files using CS3 image prosesssor with compatibility mode turned off. They have simply been saved again as PSD files into a different folder - no changes to the original PSD files. This has worked well and reduced file sizes by up to 50% (I had compatibility mode turned on previously).
of the 60 files I have processed, 3 will no longer open , I get a message that says "file will not open due to a program error."
these files have only ever been used in CS3. , they are quite large from just under 1GB to 1.5GB, however other similar large files have processed successfully. I have re-tried without success.
I still have the original files so no data loss is involved.
I'm using cs3 on a WinXP computer and over the last few days I'm all of a sudden getting a pop-up box stating that a (some tool) could not be used because of a program error. Does anyone know what this is all about and have any ideas on how I can fix it? I've restarted PS and rebooted several times and that does not help.
I have Adobe Photoshop CS2 and today when I tried to use some actions on my photo a pop-up came up saying the request cannot be made because of a program error? Has this happened to anyone before and how can I fix it? It would stop the action like halfway and not continue.
tried to open the following image formats this morning...bmp., tga, exr and everytime photoshop would give me this error" could not complete request because of program error" and when I checked the open dialog box those formats were not in the list.
We're having an issue with saving files using Photoshop CS6. Several of our users are unable to save, specifically on our server. They all get the "Could not save because of a program error" message. It doesn't seem to happen on the computers running Lion, but most of the people running Snow Leopard have the problem.
We've tried resetting the preferences, repairing permissions, etc. I read somewhere about unchecking the "ask before saving a layered tiff" button, but none of them seem to solve the problem.
How do I reinstall Photoshop CC? I appear to have created a problem by installing Photoshop CC over Photoshop CS6 and then deleting Photoshop CS6. When I open Photoshop CC i receive a message that there is program error. The Creative Cloud Application Manager seems to think that everything is OK and won't let me reinstall Photoshop CC. I am using an iMac and have Mountain Lion OS installed.
I use Photoshop daily (7.0). Just recently, I tried to save a photo and got the message "could not save because of a program error". After getting the message again tonight, I re-installed Photoshop on a NEW computer, (went from Windows 7 to Windows 8), transferred my images and got the same message. The strange part about this is that only some of my photos can't be saved - even those taken the same day. There seems to be no rhyme or reason to it.
Details: - they can't be saved in any format. I tried jpeg, tiff, png, etc. Same message for all. - they can't be saved externally. I tried to transfer them to an external drive and got the same message. - I tried uploading it to an online editing site and renaming it, then re-opening it in photoshop. same message.
I'm trying to save a PSD to PDF however each time an error message comes up- something about a program error- I have tried closing and restarting Photoshop - converting the color destination in the PDF dialogue box but don't seem to be making headway.
I got some problems with pen tool. When I want to use pen tool and select shapes I get error which says "could not use pen tool because of program error" I really dont understand whats happening with photoshop.
I make Photoshop .pdf files all the time, but today I couldn't create one. The original file was a large .psd image (26 mb). I get this error message: "Could not save as “sandybell for desert shakedown 02.pdf” because of a program error."
It doesn't say what error! However, I wonder if it's because the file is so large. I just tested Photoshop and made a .pdf file of a .png file that was 221k.
Is there a limit to the size of file you can make into a .pdf? If so, what is that limit?
I installed a new drive (OWC Accelsior SSD) via PCIe in my 2009 MacPro then loaded 10.9 on the new drive. While I have regret about 10.9 due to the Colorflow bug, I had already done the upgrade on the old drive and stayed with 10.9
I then ran Migration Assistant to copy everything to the new drive.In addition, I ran Verify Disk on both the old and new drives via the Disk Utility and all was OK.After the migration, CS6 13.0.0 will not allow me to open a file from any internal or external drive. When I select File, Open the error message states, "Could not complete your request because of a program error".
When I select File, Open 2-3 times, I am able to open a file but only from the Desktop. After trying 10 File, Opens, from the Desktop with sucess, I tried selecting an external drive and immediatly get the program error message againI tried selecting internal sata drives, an external Raid 5 connected via eSata and a drive connected via USB3 but all produced the same error message.
So I installed CC. Unfortunately the same exact problem occurs.I noticed when I was installing CC that there was an update to CS6 13.0.0. But when I tried to update via the iCloud installer and also the download from the Adobe site ,the update failed with this message, "Errors encountered during installation (U44M1P7) I have found an inconvenient workaround that might offer a clue in that I am able to open any file from any drive if I drag it over the icon in the dock. That works for both CS6 and CC.
