Revit :: Show Sloped Rafters In Section And In Plan Correctly?

Mar 25, 2013

How to show sloped rafters in section and in plan correctly? The attached plan shows the rafters as a structural beam system and I do not know how to slope the beam system to match the roof pitch.

View 2 Replies


ADVERTISEMENT

Revit :: Show Rafters Connected To Ridge Beam On Framing Plan?

Mar 21, 2013

How do I show rafters connected to the ridge beam on a framing plan? How to show collar ties on this framing plan or section?

View 3 Replies View Related

Revit :: Eyebrow Dormer Isn't Sloped Correctly?

May 16, 2012

I have a 6 pitch connecting to a 9 pitch roof. I go and make an eyebrow dormer along the 6" pitch roof and the dormer automatically is drawn as a 9 pitch with a crazy peak (almost church like).  I cannot adjust the pitch of the eyebrow to make it look appealing.

View 3 Replies View Related

Revit :: Deleted Section Marker From Plan View

Oct 11, 2013

I accidently deleted a section marker from a plan view. The section still exists and in shown in other plan views. I feel stupid for asking, but how can I get the section marker to reappear on the original plan view?

Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000

View 3 Replies View Related

Revit :: Different Dimensions And Location In Plan And Section Views For Stairs?

Aug 18, 2011

Why am I getting different dimensions and locations in plan and section views for stairs?

View 4 Replies View Related

Revit :: How To Show Dimensions For Window In Plan

Apr 27, 2012

How to show dimensions for window in plan , instead of default hexagon  (number)
 
For example 60" x 48"

View 2 Replies View Related

Revit :: Top Mullion Show Up In The Floor Plan?

Jul 24, 2012

I just created a simple winodw family. I don't understand it looks fine in the reference level within the family.
 
But once I placed it in the project, it only shows the top mullion, I had to delete the top mullion within the family to make the plan view look right.  What's the reason of it?

View 9 Replies View Related

Revit :: Why Imported DWG 3D Model Not Show In Plan

Mar 12, 2013

i have just started using revit. i imported a 3d dwg file into generic model family and loaded into my project.for some reason, the model shows in section, elevation and last level of my floor plan and site plan as well, but it is not showing in my 1st to 2nd last floor plan. can some people tell what are to possible reason for this?how can i get it show show in the plans?

View 3 Replies View Related

Revit :: Possible To Show Symbols In A Plan View

Jan 17, 2013

I'm currently looking into switching from Vectorworks to Revit due to a job application I'm being offered. What I really want to know is if the following floor plan is possible to make in Revit. I just want floor plans to be with color to better show the different things on it and make them more clear.
 
I also want to know if it is possible to show symbols in a plan view other than just a rendered hidden line view of the 3D part of it, so I can have a simplified version for the plan view and a detailed object for the 3D. Like you have a 2D-plan component for the plan views and e 3D component for all other views.

View 5 Replies View Related

Revit :: Doors Will Not Show Up In First Floor Plan?

Nov 2, 2011

Somehow today all the doors and cased openings dissapeared in my first floor plan.
 
They show up in the 3d views, sections, and second floor plan, but not in the first. I have checked the visibilty settings, and they are all checked and correct, and I have checked the height of my floor cut, which is adequately at 4 feet high. Additionally, if I make the detail level "fine" then the casings will show up around the wall but the wall will not show the door cut. The doors show up in a previous version of the model, so I'm not sure what has happened to cause the dissapearance. 

View 3 Replies View Related

Revit :: Railing Terminations Don't Show In Plan?

Nov 8, 2013

I've created custom railing terminations and applied them to a handrail. They appear in every view extept plan. Railing extensions show fine. Railing Terminations don't. I am including screenshots & the families. Visibility is on for all views and all detail levels. Linetype is set to solid in Object Styles and VG. View Range is fine. Cut plane is way above the railing and bottom is unlimited. 
 
The weird thing is that the extenstions appear in blue when the railing is selected. But they dissappear otherwise.

View 1 Replies View Related

Revit :: Filtering Work In Progress Section Visibilities From Plan By View Filters

Apr 24, 2012

I'm trying to find a way of filtering the 'work in progress' section visibilities from a plan by view filters.  The filter I use is 'Sheet Name' equal '<None>'.  Then turning off visibility.  It works when used in the Browser organisation filters but not in the view filter for the sheets.
 
I don't want to create a check box or dialogue box for the sheet as this will add to the required maintenance.

View 1 Replies View Related

Revit :: How To Show Dimensions For Any Room In Plan / Instead Of Default Area

Apr 27, 2012

how to show dimensions for any room in plan , instead of default Area (SQ FT)
 
For example ....BEDROOM   10' 3" x 10' 0"

View 2 Replies View Related

Revit :: How To Get Roof Beams / Windows To Show As Dash Dot In Floor Plan

Mar 21, 2013

Is there a way to get roof beams/windows/etc to show as dash-dot in floor plan without having to make changes in every family or for every new object?

View 3 Replies View Related

Revit :: Show Edge Of Riser Finish As Hidden Line In Plan?

Jan 18, 2012

Is there a way to show the edge of the riser finish as a hidden line in plan?
 
Also the edge of nosing against the riser to be shown as a hidden line in plan?

View 1 Replies View Related

Revit :: How To Show Site Plan That One Line Represent Building Contour

May 16, 2012

by default revit shows roof plan in the Site plan view. 

Is it possible to show site plan that one line would  represent building contour? Also is it possible to cast shadows of all the building if the first floor is selected? 

i was trying to make site plan from the fist floor, but since i gave intense topography ground is being cut and i need full topography. i am using 2013 revit.

View 2 Replies View Related

AutoCAD 2013 :: Section (plan / Elevation / Section) Snapping To Point Cloud

Nov 1, 2013

I'm looking to basically do what this video shows:

[URL]........

I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.

On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.

View 1 Replies View Related

Revit :: Light On Sloped Ceiling

Dec 31, 2012

I read a 2009/10 thread, "Rotating lighting", describing how to work around the problem of family lighting fixture members not rotating. I would hope there is a better solution today.
 
I simply want to place a lighting fixture - std 2x4 flourescent, on a 7 deg sloped ceiling. The axis of rotation is the long run of the light fixture. Is this not possible in Revit 2013?
 
Or, do I have to dredge up the work around from 3 releases ago and attempt to discern how to make it work?
 
It seems like I should just be able to set the family to use a work plane-based assignment and then place it with the correct work plane active. That is not happening. The light fixture doesn't want to rotate the 7 degrees to align with the work plane.

View 9 Replies View Related

Revit :: Show High Level Walkways And Balconies On Ground Floor Plan In High Volume Space?

Nov 15, 2012

How do I show high level walkways and balconies (in dashed outline) on the ground floor plan in a high volume space?
 
Obviously I can turn the first floor RCP on in the view and manually draw the information, but I assume these lines won't move if the walkways above move (or am I wrong?).  Also this seems slightly wrong given the amount of automation available.

View 4 Replies View Related

Revit :: Sloped Roof - Gap Between Beams And Slab

May 20, 2013

I am working on the project with sloping roof. I have drawn beams with slope. however when I am drawing slab with slopes I am not getting this slopes. There is gap between the beams and slab. I have attached screen shot for more information. Also I need to apply loads for this sloped roof.

View 4 Replies View Related

Revit :: How To (Properly) Flip Sloped Glazing

Feb 2, 2013

Working on a project with a green house. I created a roof using "roof by footprint". I selected "sloped glazing" and assigned mullions for the various conditions as well as spacing.

The walls below are curtain walls. When I create the roof, the mullions are oriented the wrong way. How do I control the orientation of the mullions?

In desperation, I mirrored the roof about a vertical axis. See images below.

This corrected the orientation for me, but I must believe there is a better way! A "proper way"... Did I miss something in the initial creation of the roof? I changed the sloped glazing of the roof to a basic roof. When I do this I notice the roof moves up.

I assume this is when the orientation of my roof inverted...

View 1 Replies View Related

Revit :: Model Sloped Grade Beam?

Apr 15, 2013

See attached. What's the best way to model this sloped grade beam?  Can I use the sweep?

View 4 Replies View Related

Revit :: Building Model On Sloped Toposurface

Aug 20, 2013

I need to model a building that cascades down a steep sloped hill. Should I create a toposurface first and then model onto that or should I make my model and then apply it to a toposurface?

View 1 Replies View Related

Revit :: Extend Mullions On Sloped Glazing

Sep 17, 2012

I made a  metal standing seam roof by putting mullions on sloped glazing roof. Is there a way to extend the mullions past the edge of the perimeter of the roof?

View 4 Replies View Related

Revit :: Sloped Floors - Join With Horizontal And Put Stairs

Mar 22, 2013

I have a situation of one sloped floor connecting two horizontal floors. They build together a continuous surface.
 
I need to join them and have the layers be continuous along the structure. If they were roofs, no problem, I could use the "roof by extrusion" command.
 
Should I do that? If I try to use floors.....
 
When I model them as three separate floors, and then Join them, it doesn't work. meaning that the layers within the floor don't match (well, they can't, in fact! I have to move the floor behind!)
  
If I model one single floor and then add split lines, and move them... it does work. BUT..... I have a stairs on top of it! the stairs have a different slope than the floor, and i need to build a variable layer that fills the void between the floor and the stairs.
 
So my hypothesis was: I put a sloped floor through the slope arrow... and then adjust one variable layer to do the inflill...
 
My dream would be to join then floor and stairs.... The material is the same

View 2 Replies View Related

Revit :: How To Create A Sloped Wall By Creating A Mass In Place

Apr 18, 2013

I am trying to create a sloped wall by creating a mass in-place.  First I draw a line on a surface at a pre-determined level that I've set up in elevation.  Then I offset this line in the vertical plane.  My next step is to offset this second line so that it is not directly above the original line, but offset in the horizontal plane.  How do I change from a vertical to a horizontal offset?  I’ve tried different work planes, but they all offset vertically.

View 6 Replies View Related

Revit :: Reflecting Ceiling Plan In Plan View?

May 30, 2012

I am working in a project where I need to represent the reflecting ceiling edges in the plan view. I  put the first floor plan as underlay, and selected the RCP projection but I don't see the dropped ceiling lines to select them with the linework command. I have done every thing possible with the view range but I don't see the lines.

View 7 Replies View Related

Revit :: Super Elevation And Side Friction In Curved Sloped Surfaces For Curves

Oct 20, 2011

Is there a way to avoid super Elevation or Side Friction in Sloped Surfaces for Curves, such as Building Pads,  Ramps, Floors, etc.. Is it mandatory.. ?? Its a problem all the time worrying about matching levels in topo surface and floors  for gradual slopes in site and side friction in  sloped ramps or sloped building pads.. that matching line between levels doesn't look good while giving presentations.. 

I have also attached an image for reference..  both the sloped surfaces are building pads..

View 6 Replies View Related

AutoCad :: How To Print Plot Plan Correctly

Sep 26, 2012

I need to make an 11" x 17" copy of my plot plan for a propane tank installation. I drew everything out the best I could to scale, however I think I may have chosen the incorrect scale. The original complete area was suppose to show 92' x 234' but my actual proposed area is only in a 14' x 10' area. So when I went to print out a PDF everything was super tiny. The original idea was every 2 cubes/squares = 1 foot.

I've tried several ways to the best of my knowledge to correct the problem even attempting to reduce it to 50' x 100' but I seem to get the same problem where if I choose to print it it wont display the Linear Dimensions I have set (as it will print it out super tiny). I even thought of maybe trying a standard 8.5" x 11" then blowing it up at kinko's but same issue.

View 9 Replies View Related

Revit :: How To Include Multiple Building Pads At Varying Levels And Sloped Pads

Aug 31, 2009

I am modifying topography to include multiple building pads at varying levels and also including sloped pads. I am having a non-consistent problem at the common boundary of some pads. A small sliver of topography sometimes 'sticks through' the common boundary. The height it sticks through seems arbitary, sometimes to the height of the original topography when cutting and sometimes much higher. I have used the copy/paste aligned commands to ensure the boundaries are exactly common but this does not work.

I have read that some users cut the topography globally and then build up the various levels and ramps using floors and the variable floor thickness command. This seems a bit cumbersome and I imagine would cause problems when cutting sections etc.

View 4 Replies View Related

AutoCad :: Hatch Concrete On A Plan Or Section?

Jun 13, 2011

I am working on some detail drawings. To save time, I simply modify the previous drawings. However, when i need to adjust the height of, for example, a window, by stretching or pulling, none can have the hatched area lengthened or reduced. In ''quick properties", the associative is not applicable if i change it from N-->Y. I'm wondering if i am doing any step wrong.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved