I do not see a way to control visiblilty of a raster image (jpeg) in a family (titleblock) that is in a project. I want the ability to turn off a stamp before plotting. R-2012. Raster images in model categories did not work. Adding a parameter in the titleblock family under 'Lock Proportions' did not work. (Other elements that use these same parameters to turn on/off visibilty were available there.)
View 2 RepliesIf I bring a raster image into Illustrator (CS5.5) and apply an Effect (Angled brush stroke) will the resulting image be a vector or raster?
View 4 Replies View RelatedI am using imported Raster images in Revit Architecture 2010 to trace and I need to make them unselectable. I know that I can 'Pin' them so I cannot move them, but I need to keep from actually selecting them. I thought I could use Design Options, but Raster images cannot be moved from the Main Model and thus remain selectable.
View 9 Replies View Relatedhow is the import scale for a raster image determined?
I've different scanned sketches of floor plans drawn by hand to specific scales, the resize tool is not quite accurate enough for my use. Does the view scale have anything to do with it?
I'm redoing some old projects in Revit, and I'm using a background image to vastly facilitate the process as the projects are almost perfectly drawn, I'd like however, to use a background image as reference and keep the underlay (e.g.: show the bg image for level 2 and over it show the level 1 underlay) but I couldn't find a way to do that.
View 2 Replies View RelatedI'm trying to create a titleblock family that has an image or dwg of my site. The easy way to do this is save a new family and import a cad file or jpg of the site plan.
However, I'd like to avoid creating a new titleblock family for each project with a new imported site image.
I thought I would be able to just make the image's "Loaded from file" address an editable field that could be updated in the project info like all the other parameters, but it doesn't seem to be possible.
I'm trying to align a nested family to a reference line in my host family so that it rotates around a certain point.
I've created the reference line in my host family, locked the end point to two reference planes and then gave an angular parameter to the angle between the ref. line and the ref. plane.
I then inserted the nested family and aligned it to the ref. line. The problem is that when I flex the angle, i get a "Constraints not satisfied" error..
What could be wrong?
I'm using a generic face based family for both host and nested families...
Using Building Design Suite Ultimate 2014
I need to insert a image to a face to a model and save it as family. And use the created family in projects.
Note: The image should be associated with the family.
I have a set of four images I am referencing into a drawing through the data connect feature found in Planning and analysis that overlap. I am running Civil 3D 2013. I would like to be able to clip the images as well as turn off the transparency but I can't seem to figure out how. If you select the images cadd thinks it is an image referenced outside of Data connect, but the clipping tool doesn't work, and it doesn't even matter if you de-select print transparency in the page setup, it still prints transparent. Is there another set of commands or tools that I am not aware of that allows you to edit an image brought in through the data connect?
View 2 Replies View RelatedI'm having issues with print quality on certain drawings, which is a shame as print quality generally exceeds that of AutoCAD Architecture.
The issue I have is with a SHADED and shadowed elevation drawing. When I go to print to PDF it insists line removal is done using raster rather than vector processing. This leads to a poor quality PDF both on screen and printed.
I accept that automatically generated shadows may make this necessary but with then turned off, I don't.
If I print a coloured plan, say a room or area drawing with automatically generated colours, it's quite happy to plot it using vector processing. I DO NOT see any difference between this and a shaded elevation without shadows! Any way of improving the look of raster processed output?
I use a raster image (JPG) on my title block for the Company Logo. This all worked fine in Revit 2009. Since I installed 2010 the logo no longer prints. I have tried other images and even converted it to a TIF.
It does not seem to be linked to any one printer. I have tried plotting on a HP Plotter, HP Laser Jet, Sharp Printer/ Copier, and even to a PDF. All have the same result. No Logo.
Still trying to set up revit standards can't come to conclusion regarding plotting vector or raster. My personal (limited) experience raster plotting has been poor quality with vector the plots are cleaner and it seems I have better control of shaded areas.
View 2 Replies View RelatedIn Revit 2013 I attempt to load an item from the Family but I find that the “Load Family” dialog box does not appear. how to get it to cooperate? Even starting a new project the load family dialog box does not appear. I have done: 1) system restore, 2 ) repaired install, 3 ) re-installed, 4) uninstalled and reinstalled from scratch but still the problems persists on this machine. all other office PC’s with Revit 2013 behave.
View 2 Replies View RelatedI've attached a simple RVT file with a family inserted and the front view active. I need to rotate the family 90 degrees but Revit reports the following error:
"Can't draw because Work Plane is at a very sharp angle in this view. Go to another view or redefine the Work Plane."
I have several window types in my project. Let's say that the window is 3'-0" wide by 4'-8" high - Mark #1. I want to group three of these windows and schedule the group as Mark #2 - not three separate #1 windows. How do I set up the three windows together to become a single window schedulable for the entire opening of the three windows grouped together so that the opening would read 9'-0" wide?
View 6 Replies View RelatedIs there a way to load, for example, a wall created in a different project, into another project?
View 1 Replies View RelatedI downloaded a grab bar family that I thought looked very good. But then I tried to place it on the toilet stall portion (I also downloaded stall partition families). When I tried to place the grab bar, it wouldn't place -- I believe because the grab bar is WALL BASED.
So now the question is how do I go about placing a grab bar (or anything else) that is not wall based so that I can use it with the stall portion? I had tried to use face based but couldn't get that too work.
Im try to crop .rft format but i cant crop my family model in project file. Then how to explode family in project file.
View 9 Replies View RelatedI would like to create family type with drop down list as shown in the image.
How it is created and for what?
Recently, My revit does not load families. The process I use is the following:
In the Build area of the home ribbon, I select the Component button. I going to the Place component ribbon. When I select Load Family form the Mode portion of the ribbon, the properties box pops up. It is locked at this point and I cannot do anything but hit escape. The program functions just fine in all other aspects. I have used a vanilla project to see if the project I am working on is corrupted and I get the same results.
I am trying to create a custom planter based off some line work that I did in my project. It has a curve. basically what I have done is created the line work on plan but now I want to use that curved line to create my family. which I am thinking I can create a profile and then sweep it on those lines. The problem is I can get the line work to the family.
View 2 Replies View RelatedI'm trying to edit the keynote family with no luck. We are updating our standards and getting into using the keynote system in revit. I have added the correct keynote to most of our standard materials and its working great. I then opened the keynote family and changed the justification of the text to justify the way we do notes. I also changed the line style of the leader lines so it matches our other notes.
All went well. I get stuck when I try to change the gap between the leader tail and the text. I can't find anywhere to actually edit the line/arrow in the family that would let me change how that works. If you see my attached image the one on the top is our standard note and the other two are the keynote family.
How to set / change that gap?
I'm trying to create a frame and panel kitchen cabinet door family. It flexes correctly horizontally, but I can't get it to flex vertically. What do I need to correct?
View 2 Replies View RelatedIs it possible to create the Wall family in revit?
View 5 Replies View RelatedRemoving tag leader, I couldn’t know how to remove the leader of the tag from its family. How this might be done?
View 5 Replies View RelatedThis includes door opening/cased and opening-elliptical art. When I put them into my drawing they show up in the preview but do not insert into my drawing.
View 2 Replies View RelatedI know I must just be missing this somewhere, but I would like to shut off the geometry inside a family that's associated with a specific parameter. This is while I'm editing the family.
Specifically, the family I'm creating is for an appliance that has the option of an arched, or rectangular opening. Once I associate the geometry for the arched opening with a parameter, I'd like to shut that off, so that I can create the rectangular opening. Similar to how the family behaves once it's brought into a project.
Right now, I'm just kind of using the temporary hide functionality to shut them off, but if I turn them on, then have to go back to make edits, I have to select the individual geometry all over again to hide it. I've also noticed that some geometry, even when hidden, can still be selected.
As Revit insert a door it cuts the wall starting at the flooring level upward door height but in real building the door openning starts from the top concrete
Can I tell revit to start cutting the wall bellow flooring (leaving the door wing to start from flooring) or how can i add this feature to door family...i would like to control the height of the cut below flooring (e.g be a parametric).
Is it possible to add a rotation control to an annotation family like the ones in elevation tags?
View 2 Replies View RelatedThe line color of my family is not showing up. It is just a symbol and it should be red, but it shows up black. I went to the overides in the project and nothing was overridden, so I went ahead and changed the imported families override to red just to see if it would change and it still didn't change. How do I fix this? When I open the family, the lines are red, just not in the project.
View 1 Replies View RelatedI created one panel family. On plan view, I added two parameter for just width and lenght (Picture 1), but at the same time, I cannot added parameter for adjust the angle in the elevation plan(Picture 2) .
Attachment is my .rfa file