When we draw a reference plane in a project in the Level 1 (0' 0" Elevation) then the reference plane elevation shows 4’ 0” in the Specify Shared Coordinates Tab. Why the elevation of reference plane shows the 4’ 0” height? Is it default elevation for reference plane?
See the attached jpg .
I am trying to lock a reference plane to a wall location. Is this possible? I want to move the reference plane and the wall follow. I keep having people who want to make the building bigger.
View 1 Replies View RelatedI had this working just fine, then made some changes (including deleting some reference planes) and now I can't get it to work. I need to lock a diagonal reference plane to the intersection of 2 orthogonal reference planes, so that my door (on an angle) will slide toward the fixed corner, instead of the corner moving toward the door. It must be something simple I did the first time that I'm just not thinking of this time around...
View 5 Replies View RelatedI can't seem to find any sloping reference plane I have inserted as a Top Constraint for a wall I want to draw under it. How to make that happen? The only Constraints visible are Levels and Levels only appear to allow themselves to be draw exactly horizontally.
View 5 Replies View RelatedI have developed a family-construction method that combines equipment with its dedicated electrical receptacles. It is designed such that once inserted, the user can drag the outlet symbol and outlet to the right or left and also move the outlet symbol away from the wall plane to permit symbol stacking in plan. Most of the time this works but on some families, though seeming constructed in the same manner, the link between the receptacle and the controlling plane gets broken. The link to the outlet annotation family always stays connected.
I've attached a Revit project contain two families, one that works and one that does not.
I have set up a plane on whicg I have a referance image that I will base my model on. The problem is I can't see image after I start to block it out. When I turn wireframe on the image disapears?
How to I see referance plane image and have the rest in wireframe?
I have a sheet with labels on the TBC with station and elevation. If I plot the sheet everything shows up fine. If I publish to PDF, the elevation portion of the labels shows as ?
View 1 Replies View RelatedI am create the stron network. I want structure profile elevation. How to create expression in structure reference alignment profile elevation.
View 9 Replies View RelatedI am trying to annotate a floor plan to show the location/orientation of section, elevation and detail drawings. The labels must also indicate the appropriate drawing cross reference. (basically a circle with a arrow, text inside circle showing drawing cross reference). My question is - is there an automated way/library to insert such labels or do I have to create each of them from individual elements and make a block?
View 1 Replies View RelatedIs there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
Is there a work around to extruding a profile that is not parallel to the plane on the path. Im new to revit and want to create a component the way I did in AutoCAD when I could just Extrude a closed poly with a path and it did not care it it was perpendicular to the path.
View 8 Replies View Relatedwhen I insert a window family the cut plane Revit uses is that of the family rather than that of the view. This causes a lot of problems for us when we need to cut the same window at different levels in different views and the window itself should look different. The window itself is built to look differnet at 3 ranges of cut plane height. However, if I try to control this throught yes/no visibility parameter it affects all views. I fail to make it view specific. Is there any way to make an instance parameter or view specific parameter for the cut plane/ visibility of parts in the window family. It is such a basic need for architects and I fail to understand its absence in the Revit. Generaly speaking one should be able to control what you see in each plan section view. It's an essential thing in architectural drawing.
View 9 Replies View RelatedHow We can to change the default height Ceiling plane In Project Browser.
For example, the Default is 2600mm.
I want to Over 2800mm set.
Not in Time Drawing Ceiling.
I am trying to create a mass surface that is being cut by a topo plane. What I am trying to achieve or show is a height setback set from the existing topo to a height of 35'. I've tried to cutting or joining the two geometries but this will not work. There is no way to snap t the intersection of were the mass and the Topo surface meet. Is there a way to change a Topo surface into a mass? Any other way to achive this instead of massing and topo surfaces?
View 5 Replies View RelatedHow do I raise the cut plane in the floor plan view. I have windows that are not showing up in the floor plan because the sill is above the cut plane.
View 1 Replies View RelatedI need to create a sloped roof. I want to base this roof upon a beam system created using a sloped work plane rather than offset from a level. I now understand that (for some reason) Revit will not create floors or roofs using work planes, but only on levels, and I know that I can create a flat roof on a level and apply slope arrows and adjust the offset height, etc. etc. but that is very imprecise (lots of micro adjustments) and a lot of steps.
Isn't there any way to create a floor or roof using a work plane as the level?
The attached image shows a roof I created "by face" from a box mass element I set on the plane - unfortunately now I cannot edit the outline to get it to fint my non-rectangular roof.
In Revit 2012, how do I place a wall at an angle to the ground plane, so it can be connected to a roof above? I have tried placing a wall on level and rotating it, however it does not appear to work. I can rotate other elements, but not walls.
View 1 Replies View RelatedI am using Revit Architecture 2012 and I am having some issues with plan regions. I am not able to get my stairs to show up sometimes and I cannot figure out why. I have attached 2 images of my drawing to show the issue. The 2 floors in this image are a basement and lower level. I am on the basement level and the plan region cut plane is set to lower level and it is cut @ 4'. The top is lower level @ 7'-6" and the bottom and view depth are on basement @0'-0". If I turn the underlay on to show the lower level the stairs show up.
View 9 Replies View RelatedIs the anyway to keep the body of a custom Elevation tags to stay horizontal as do section tags?
View 7 Replies View RelatedI noticed that I don't have (ELEVATIONS) tab and also (elevation icon). See the picture. Also (Elevation Marks) in the window view are not exist.How can I regain all these?
View 6 Replies View RelatedIs it possible to move an elevation tag in one view and move the same one in another view keeping them in there separate locations?
View 1 Replies View RelatedI am in the process of drawing up an existing building and firstly am setting up with the building mass. I have managed to get the main bodys of the building done and the main roof.The problem now is that when i switch too the east or west elevations to add mass for the roofs on the adjoining wings of the building it wont let me see the model lines when i draw them in the screen i just get an error message " None of the created elements are visible in Elevation: East View. You may want to check the active view, its Parameters, and Visibility settings. "I have my reference line set not far from the building and it seemed fine when i done the roof from the north and south views for the main building. I can see the model lines when i switch too 3D views but i cant create the mass from there.
View 4 Replies View RelatedHow to visually represent depth in an elevation?
The only answer I've found is to use linework, but that can't be the way to go in a program such as revit. That's the whole point of it, right? To not have to sit and do things manually and then have to change the lines every time something in the building changes. I know that Archicad can show line thickness depending on distance from elevation line. And god do i dislike Archicad, but that's exactly what I'm looking for.
Another answer I've found is to use shadows, but then you get the problem of only being able to print as raster = no sharp lines.
I have inherited some Revit files, all of which have a ground floor and ceiling plan (hence an associated level).
The levels do not show the in elevations (or sections for that matter). It is not a view setting, I have checked this, nor are they hidden by category or element. I have added new levels and these are visible. The levels exist, I just cannot view them or select them.
The level lines appear in the east elevation but not the building. The elevation marker tab is blank, unlike the N,W,and S tab.
View 1 Replies View RelatedI received from our client a dwg file. i follow the steps in creating a topo surface file from a dwg within revit. However, revt include also the zero Z-elevation points within the file. And so it igave me a very weird result of the toposurface.
Know any good procedure in preparing a dwg file before importing/linking to revit or rather excluding all zero Z-elevation points.
Opened the Elevation Tags dialog (manage Additional settings) duplicate the 1/2" Square type call it External Elevation Tag. did the same to 1/2" Circle call it Internal Elevation Tag.
picked the elevation tool go to type selector and my new Elevation Tags not there - why?
A coworker believes an elevation tag can be placed in plan view A, but can be moved in plan view B without relocating it in plan view A. My experience...move an elevation tag in one view and it will be relocated in all views. Is there a way to have two different locations but reference the same elevation?
View 3 Replies View RelatedIs there a way of displaying mounting heights of fixtures and fittings on elevation in revit architecture, like using a 300mm grid or something
View 1 Replies View RelatedI understand how to do a Rendered Elevation, but how do I get a Rendered Elevation with Keynotes and Levels to show up?
View 4 Replies View RelatedPossible to change/set the work plane while sketching the path of an in-place model? This guardrail extension is an example of where I would have liked to change the work plane while sketching the path because the path shifted planes. I believe you can do this in the family editor, but I could not get it to work in the in-place modeler. What I ended up doing (as an experiment) was to create masses and picked their edges to get the path I wanted. I would love to be able to have more control over the work plane, like defining the workplane by a face and then being able to move it relative to the face selected.
View 5 Replies View Related