Revit :: Getting Work Out Of Demo Mode
Oct 7, 2011
So, I was told I needed to use Revit for my course, went on the website and found 'free student version, download now, it's great' or some such, and downloaded it. Soon after it came up saying I needed to activate the product, and gave no indication of how to do so, I left it for a while, then, there being little else I could do, until it came up saying my trial version had run out, and that I needed to activate right then. By then, of course, I had forgotten my password, tried everything it could have been, none of them worked, so I arranged to change it, turns out I have to change it twice, the first new password only working to change it again, so now I have had to make up some new password I will never remember, but anyway. whilst I was trying to convince it to let me sign in with my new password, I found that I could actually still get into the program, and so started work. Turns out I was working in the 'demo mode' and cannot save everything I have done, but now I have finally managed to activate the product and open the real version, but i still cannot save what I did before.
So, long story short, my work is in demo mode, I want to save it, is there any way of copying it into the real version that I can now access and saving it there?
View 2 Replies
ADVERTISEMENT
Sep 23, 2013
When I insert a new window into an exterior wall in the proposed phase, the demo phase drawings shows dashed lines on the faces of the wall, but no dashed lines running through the wall on the left or right of the window. This makes it very hard to tell where the demo opening should be. Attached is a screenshot of this issue.
View 1 Replies
View Related
Dec 31, 2013
Why new rooms show up in lieu of existing rooms when"show previous and demo" are set for the phase filter? Every single other existing element including doors, walls, windows, etc. show in the "show previous and demo" phase filter with the exception of rooms.
View 5 Replies
View Related
Feb 19, 2013
photoshop getting really slow when work 3d mode. i have 4GB ram. is that not enough?
View 4 Replies
View Related
Jun 14, 2012
I cannot get Illustrator CS6 to work in isolation mode. I am in graphic design school and just learning Illustrator. The video I'm watch is telling me to double click the element (which is grouped) to enter isolation. I have tried severl times, even rebooting my computer to see if was a glitch. Still nothing happens when I double click. Using a Wacom tablet. But I even tried clicking with the trackpad, still nothing happens.
View 5 Replies
View Related
Nov 21, 2011
Searched the net and did find some official tutorials where its says the Poly mode could be toggled. Like hitting "2" once switches Edge and hitting twice toggles poly mode "off". But I don't find the option where it can be set.
View 3 Replies
View Related
Sep 6, 2012
i am trying to understand how to work in the connect fx mode, but one thing that seems to be completely eluding me is why the output going to my broadcast monitor (via Kona3) is showing only the output from the left window when in CFX (currently Connect FX schematic), and not the final video.
My mac screen has a 2 up view showing the CFX Schematic on the left and the CFX Result on the right.
Is there any way that i can use the two windows on the mac screen without affecting what is feeding the broadcast monitor? I really want a system that always shows me the final output on the broadcast monitor, with everything else happening on the mac screen.
View 1 Replies
View Related
Aug 10, 2013
I can't use F8 key for Ortho mode in Auto Cad 2012. I checked CUI and it seems to be ok but when I press the F8 key It doesn't work. as matter of fact, after pressing F8 key, line type manager window is opened!
View 9 Replies
View Related
Nov 12, 2012
I have Windows 8, and Photoshop CS6. All of my blending modes work, except for Screen. I don't know why it doesn't, but I do use it somewhat frequently, and it's really holding me back at this point.
View 4 Replies
View Related
Jun 8, 2007
I like grayscale photos, but I don't want to lose the color informations of my layers, because maybe later I want the colors back.
Is there a mode or plugin or something in Photoshop, that lets me display all layers in B/W mode but without having to lose the color information?
View 2 Replies
View Related
Oct 21, 2007
I use Photoshop LE 5.0, which has many of the BIG Photoshop features.
If I take a web page screenshot and turn it into greyscale and print that,
I still get some colors coming thru on the printout, even though it looks b/w on the screen.
Is this a common problem? Photoshop or Printer or Windows?
View 2 Replies
View Related
Jan 29, 2013
when i run my photoshop cs5 in administrator mode using "run as Administrator ... ", drag and drop does not work.
View 2 Replies
View Related
Oct 15, 2013
I am having quite a frustrating issue when trying to simply shift + drag in edge mode. I click the edge and hold shift to drag it and it instantly becomes deselected when clicking the the gizmo to move up.
View 5 Replies
View Related
Jul 8, 2013
I have used PSE 5 happily and greatly liked the auto sharpen feature. I have been forced to upgrade to PSE 11 due to Windows 8 incompatibility with 5.
I am appalled to find that the sharpen feature, including auto, does not work in Quick or Guided modes. The small previews in Quick mode show the correct sharpening effect but clicking on them or using the slider does not transfer to the main image. I either have to go into full unsharp mask, which I hate for quick fixes, or use the 'adjust sharpness' option under 'filter' in Quick or Guided Mode, which increases sharpness by an unspecified amount on each click.
View 2 Replies
View Related
Dec 16, 2012
I just installed Lr4 with update 4.3. . First when i click a photo in develop mode it shows up very small. If I adjust the zoom the photo does erratic things. It gets big but with massive distortion then it will clear up but will have an effect like looking into a bunch of mirrers. Also i can not get the adjustment tools to work at all.
View 5 Replies
View Related
Dec 20, 2013
In LR5, Slideshow module, the arrow keys do not move to the next or previous image in the auto mode. They do work in the manual mode, but I need them to work in the auto mode as well.
View 5 Replies
View Related
Nov 22, 2011
I click on the Massing & Site Tab, then on the Topo surface Icon. The tab automatically switches to the Modify/Edit Surface Tab. Then I place the points and generate the topo surface. Then I try to save this work and get the following popup window"
SAVING IN EDIT MODE: Changes made in this edit mode will not be saved. The project will be saved as it was before you entered this mode. SAVE CANCEL.
View 3 Replies
View Related
Mar 11, 2008
I can open only one file at a time - attempting to open multiple files (>1) causes a mishandled exception triggering the debugger. The demo was downloaded from adobe 3-11-08. No errors occurred during installation - all seemed to have gone well. Any help?
View 1 Replies
View Related
Oct 15, 2004
Everytime I launch it the programme activates the expired demo version and won't let me enter the serial number of the programme. Any ideas? Is there is fix available. I couldn't find anything on the adobe site and tech support sent me an auto reply which mentioned within 48 hours and I don't have 48 hrs.
View 6 Replies
View Related
May 28, 2009
I am currently running CS2. I tried the CS4 demo, but found that my laptop was not powerful enough to process the 3d images. I deleted CS4 and would like to continue with CS2. CS2 runs fine now but I have a problem that if I right click a photo and chose to open it, it wants to open it with CS4 and gives me error conditions. I have used add/remove programs to delete CS4 and have also run a registry fix as well, yet this problem continues.
View 2 Replies
View Related
Feb 13, 2012
Below is the image of my ribbon after I begin the edit boundary command for a floor slab. For some reason the ability to finish or cancel the edit mode disappears and I'm unable to close out of the command without undoing everything I've done.
View 9 Replies
View Related
Dec 17, 2013
I downloaded the 32 bit version of 9 and installed it on my 64 bit laptop.I went that way as I read the 64 bit doesn't support all features and I know my GIS software doesn't in similar type of installations.
I couldn't find any more about running 32 bit version on 64 bit device so expected it should work okay.EDIT - After installation I was prompted with this fact but it did say no problem with running it that way.Just mention here as others may be confused and wonder which version will work on a 64 bit machine.
But when I got past the installation and onto registering it for an extended 30 days I was blocked with the message CSRF blocked...
[URL]
View 4 Replies
View Related
Oct 18, 2012
I downloaded the demo version of lightroom4 for testing. But in the demo there is no option (possibility) to add a watermark. Can that be?
View 1 Replies
View Related
Jun 4, 2013
Experiencing the Thin Lines mode printing with thin lines, not just affecting the view display?
View 9 Replies
View Related
Dec 8, 2008
I evaluate Streaming Profiler for a 5000+ User environment. One of my challenges is to stream Photoshop. There will be several hundred of Photoshop users.
I'm an extremal Consultant and therefore I don't have a serial number yet, but have to present next friday, 7am GMT. I loaded a copy of Photoshop today, installed a Demo, but ran into the following problem:
OS: WinXP, 4 GB RAM, Intel i7-965 Processor
Installation went terrible well, apart from the fact that I could not leave the updater unselected (a must have in a streaming environment).
When I started the program it instantly quits telling me: Error: 148:3
Licensing for this product has stopped working.
This product has has encountered a problem which requires you to restart your computer before it can be launched.
However, reboot is a lye, there is no point in rebooting, the program won't start.
There is no way to enter a serial number, just this sticky finger message. The promise of 30 days trial? Not in this environment?
View 7 Replies
View Related
Sep 29, 2013
I am running the SMAC demo (installed 9/13/13 - Friday the 13th !!!) and all has been fine untill today. Now SMAC will not start. I click the icon and it bounces for about 3 minutes and then stops. Clicking on the icon reveals the old Application Not Responding.
My storage volume is mounted. Don't see anything odd in the Service Monitor. A restart of mac gets the same story.
View 4 Replies
View Related
Aug 18, 2013
When starting Xara Designer or Xara Webdesigner, I always get an introduction page (getting started...) and I always have to close this page before starting. Is there an option to disable this display and get a blank page instead.
View 1 Replies
View Related
Mar 14, 2012
Ribbon has been acting strange. One example is when creating a sweep the ribbon will not show the mode options to accept or discard changes while creating the sweep path. I have to cycle the ribbon display options to show the X and check options to complete the sweep path. This is only one example of many different odd things happening.
Sometimes when I am simply drawing model lines the selection options for rectangle, circle etc do not appear until I cycle the ribbon display options. This only started in the last week or two.
Windows 7
RAC2012
View 8 Replies
View Related
Aug 16, 2012
i cannot find a video i watched last week on the new features of cs6 photoshop. I have been searching for the last hour on adobe tv for the one i am after and cant find it. It features the content aware move tool, fixing skin tones, camera raw, and video (and a few more i think). All the examples use images of models and the video is of models too.
View 1 Replies
View Related
Jul 20, 2011
I want to create a routine that will place selected objects on a the corresponding demo layer. Here is the outline:
enter command
select object
extract layer name of object (i.e. "CS CURB")
if demo layer exists (i.e. "CS CURB CD")
>put object on demo layer
>else create demo layer, and place object on layer
I could select multiple objects on different layers.is this possible with lisp? any good starting point for lisp programing?
View 9 Replies
View Related
Nov 20, 2009
I would like to propose a focused thread or forum exclusively for the discussion of all things Revit and Rehab projects. There are some very frustrating things that occur when using Revit to document architecture projects in conjuction with rehab work. I am of the opinion that this is a very important area of architecture that is currently not being well documented by Revit users, Revit software vendors, Revit training specialists or by autodek itself.
The world has a huge stock of existing buildings, how can we iron out the duplicity of work that is currently required in order to use Revit in conjunction with rehab/renovation work.
View 9 Replies
View Related