Everytime I launch it the programme activates the expired demo version and won't let me enter the serial number of the programme. Any ideas? Is there is fix available. I couldn't find anything on the adobe site and tech support sent me an auto reply which mentioned within 48 hours and I don't have 48 hrs.
View 6 RepliesI can open only one file at a time - attempting to open multiple files (>1) causes a mishandled exception triggering the debugger. The demo was downloaded from adobe 3-11-08. No errors occurred during installation - all seemed to have gone well. Any help?
View 1 Replies View RelatedI am currently running CS2. I tried the CS4 demo, but found that my laptop was not powerful enough to process the 3d images. I deleted CS4 and would like to continue with CS2. CS2 runs fine now but I have a problem that if I right click a photo and chose to open it, it wants to open it with CS4 and gives me error conditions. I have used add/remove programs to delete CS4 and have also run a registry fix as well, yet this problem continues.
View 2 Replies View RelatedI evaluate Streaming Profiler for a 5000+ User environment. One of my challenges is to stream Photoshop. There will be several hundred of Photoshop users.
I'm an extremal Consultant and therefore I don't have a serial number yet, but have to present next friday, 7am GMT. I loaded a copy of Photoshop today, installed a Demo, but ran into the following problem:
OS: WinXP, 4 GB RAM, Intel i7-965 Processor
Installation went terrible well, apart from the fact that I could not leave the updater unselected (a must have in a streaming environment).
When I started the program it instantly quits telling me: Error: 148:3
Licensing for this product has stopped working.
This product has has encountered a problem which requires you to restart your computer before it can be launched.
However, reboot is a lye, there is no point in rebooting, the program won't start.
There is no way to enter a serial number, just this sticky finger message. The promise of 30 days trial? Not in this environment?
i cannot find a video i watched last week on the new features of cs6 photoshop. I have been searching for the last hour on adobe tv for the one i am after and cant find it. It features the content aware move tool, fixing skin tones, camera raw, and video (and a few more i think). All the examples use images of models and the video is of models too.
View 1 Replies View RelatedI downloaded the 32 bit version of 9 and installed it on my 64 bit laptop.I went that way as I read the 64 bit doesn't support all features and I know my GIS software doesn't in similar type of installations.
I couldn't find any more about running 32 bit version on 64 bit device so expected it should work okay.EDIT - After installation I was prompted with this fact but it did say no problem with running it that way.Just mention here as others may be confused and wonder which version will work on a 64 bit machine.
But when I got past the installation and onto registering it for an extended 30 days I was blocked with the message CSRF blocked...
[URL]
So, I was told I needed to use Revit for my course, went on the website and found 'free student version, download now, it's great' or some such, and downloaded it. Soon after it came up saying I needed to activate the product, and gave no indication of how to do so, I left it for a while, then, there being little else I could do, until it came up saying my trial version had run out, and that I needed to activate right then. By then, of course, I had forgotten my password, tried everything it could have been, none of them worked, so I arranged to change it, turns out I have to change it twice, the first new password only working to change it again, so now I have had to make up some new password I will never remember, but anyway. whilst I was trying to convince it to let me sign in with my new password, I found that I could actually still get into the program, and so started work. Turns out I was working in the 'demo mode' and cannot save everything I have done, but now I have finally managed to activate the product and open the real version, but i still cannot save what I did before.
Â
So, long story short, my work is in demo mode, I want to save it, is there any way of copying it into the real version that I can now access and saving it there?
I downloaded the demo version of lightroom4 for testing. But in the demo there is no option (possibility) to add a watermark. Can that be?
View 1 Replies View RelatedI am running the SMAC demo (installed 9/13/13 - Friday the 13th !!!) and all has been fine untill today. Now SMAC will not start. I click the icon and it bounces for about 3 minutes and then stops. Clicking on the icon reveals the old Application Not Responding.
Â
My storage volume is mounted. Don't see anything odd in the Service Monitor. A restart of mac gets the same story.
When starting Xara Designer or Xara Webdesigner, I always get an introduction page (getting started...) and I always have to close this page before starting. Is there an option to disable this display and get a blank page instead.
View 1 Replies View RelatedWhen I insert a new window into an exterior wall in the proposed phase, the demo phase drawings shows dashed lines on the faces of the wall, but no dashed lines running through the wall on the left or right of the window.  This makes it very hard to tell where the demo opening should be. Attached is a screenshot of this issue.
View 1 Replies View RelatedI want to create a routine that will place selected objects on a the corresponding demo layer. Â Here is the outline:
enter command
select object
extract layer name of object (i.e. "CS CURB")
if demo layer exists  (i.e. "CS CURB CD")
>put object on demo layer
>else create demo layer, and place object on layer
I could select multiple objects on different layers.is this possible with lisp? any good starting point for lisp programing?
I have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
Why new rooms show up in lieu of existing rooms when"show previous and demo" are set for the phase filter? Every single other existing element including doors, walls, windows, etc. show in the "show previous and demo" phase filter with the exception of rooms.
View 5 Replies View RelatedI have a fairly new DELL PC that meets all the minimum system requirements. I am running Window 7 and I can't get Autocad 2013 demo to run. It says install successful but when I try to run it it just hangs up and says "First run Initializing" and never loading. This is the first program that won't run I've ever had with this new computer.
View 5 Replies View Relatedwhy is it that when i make a new thing it is always locked can some 1 tell me how 2 stop this?
View 2 Replies View RelatedI am using photoshop V7. what file I load the "Background Layer" is locked. When I try Help it says select "Layers Window" and click "Layers Locked"... The problem is, only selections not grayed out are; New, Duplicate, Fill, or Adjustment... all other items are GRAYED OUT.. I checked preferences, but find no reference to the subject.
View 9 Replies View RelatedI scanned a photo into PS and then tried to work with it but find my cursor changes to a round circle with a line through it. I can't use any tools on it but I can bring up another photo and everything is normal with that photo.
View 9 Replies View RelatedAfter changing preferences, plug in views, etc I get a message the file is locked and changes won't be saved. Even after unlocking, adding myself as user with read/write privileges, changes are not saved when PS is closed.
View 11 Replies View RelatedI am creating an image in Photoshop CS6. I've saved it a few times but now it's telling me the file is locked. I resaved it as something else and now the original file has vanished!
Â
I looked at the properties of the file before it vanished and clicked the security tab and it told me I didn't have permission to view it and I had to be an administrative user, which I am. It gave the option of giving myself permission and said the previous owner may no longer have permission but there was no previous owner listed (obviously because there never was one).
Â
These files are very important, I can't risk them just vanishing or locking me out. Why is this happening and how can I stop it?
I've recently switched from 6 to 7. When I open an image the layer is locked and I can't unlock it (greyed out). This prevents me from adding the drop shadows I need to add. Any answers out there, please?
View 4 Replies View RelatedI just activated my trial edition with a serial number. Now, when I open an image the cursor becomes a stop sign (circle with slash line through it).
Not sure that activation caused this, but I cannot edit my images.
My problem is that i had to re-instate windows xp plus all my software and since doing this some of my files on my external HD will not open i try and i get the error message "could not complete the request because the file is locked. use the properties command in windows explorer to unlock the file" i dont know how to get the files viewable again photoshop opens ok it just doesnt open the pictures ....
View 3 Replies View RelatedI am using Photoshop CS2 and whenever I open a .jpg , .gif or use my scanner and scan something into PS the layer always starts out locked.
Is there a way to change this so it is not locked everytime?
I try to open my Photoshop 7.0 I get two error messages. I don't understand why I am getting these messages, or how to fix them. The error messages appear at startup during the initializing of the Photoshop 7.0, these messages state:
Error Message 1: Can not find workspace folder.
Error Message 2: Could not initialize Photoshop because the file is locked. Use the Properties command in Windows Explorer to unlock the file.
There is no Properties command under Windows Explorer, there is one under Photoshop 7.0, but nowhere does it say "unlock file". I have seen a similar problem for the CS2 in the FAQ section, so I tried to use that fix, but it did not work. I have uninstalled & reinstalled, cleared cache, de-fragged, and unhidden the files ...
a client has asked me to alter a graphic, it's a gif file and when I open it shows as one layer. It shows as partia;y locked. clicking thepadlock icon
does not unlock it
Is there a way to unlock it?
I was sent a jpg image via email, made a correction and put it on our network for another colleague to open. When she tried to open it, the following message below came up and I can’t rectify the problem and open it on my colleague’s machine.
View 6 Replies View RelatedAdobe production premium? I have this for windows. what if i wanted it for mac? If i wanted it on both windows and mac i'm guessing that would mean buying it again fully as another license? Or could it be used as the "secondary install" of the application? (I would keep this PC too). Either way, is it possible to get the program as another download using the same serial code, but one for PC (which i have), and one for mac?So i'd have one serial code but with two installers, one pc, one mac, basically.
View 39 Replies View RelatedI have a file that someone created and one of the layers says that it is 'Partially Locked'.
I never had delt with this before and was wondering how I go about unlocking it.
Double Clicking it, like I do with locked layers, only brought up the layer style property box.
I'm trying to install a plug-in for Photoshop CS3. It's a DDS File Type Plug-in. When I run it, Photoshop gives me this errer message:"could not complete your request because it is not the right kind of document" how to install and use this plug-in
View 10 Replies View RelatedI am using Photoshop CS2 with Windows XP. Why are all the photos that I import into Photoshop have the layer locked. I tried to save them both as .psd and as .jpeg. But, it makes no difference. In the layer pallette, the layer is marked as locked but the icons at the top are all grayed out.
View 7 Replies View Related