Photoshop :: CS4 Demo Interferring With CS2
May 28, 2009
I am currently running CS2. I tried the CS4 demo, but found that my laptop was not powerful enough to process the 3d images. I deleted CS4 and would like to continue with CS2. CS2 runs fine now but I have a problem that if I right click a photo and chose to open it, it wants to open it with CS4 and gives me error conditions. I have used add/remove programs to delete CS4 and have also run a registry fix as well, yet this problem continues.
View 2 Replies
ADVERTISEMENT
Mar 11, 2008
I can open only one file at a time - attempting to open multiple files (>1) causes a mishandled exception triggering the debugger. The demo was downloaded from adobe 3-11-08. No errors occurred during installation - all seemed to have gone well. Any help?
View 1 Replies
View Related
Oct 15, 2004
Everytime I launch it the programme activates the expired demo version and won't let me enter the serial number of the programme. Any ideas? Is there is fix available. I couldn't find anything on the adobe site and tech support sent me an auto reply which mentioned within 48 hours and I don't have 48 hrs.
View 6 Replies
View Related
Dec 8, 2008
I evaluate Streaming Profiler for a 5000+ User environment. One of my challenges is to stream Photoshop. There will be several hundred of Photoshop users.
I'm an extremal Consultant and therefore I don't have a serial number yet, but have to present next friday, 7am GMT. I loaded a copy of Photoshop today, installed a Demo, but ran into the following problem:
OS: WinXP, 4 GB RAM, Intel i7-965 Processor
Installation went terrible well, apart from the fact that I could not leave the updater unselected (a must have in a streaming environment).
When I started the program it instantly quits telling me: Error: 148:3
Licensing for this product has stopped working.
This product has has encountered a problem which requires you to restart your computer before it can be launched.
However, reboot is a lye, there is no point in rebooting, the program won't start.
There is no way to enter a serial number, just this sticky finger message. The promise of 30 days trial? Not in this environment?
View 7 Replies
View Related
Aug 16, 2012
i cannot find a video i watched last week on the new features of cs6 photoshop. I have been searching for the last hour on adobe tv for the one i am after and cant find it. It features the content aware move tool, fixing skin tones, camera raw, and video (and a few more i think). All the examples use images of models and the video is of models too.
View 1 Replies
View Related
Dec 17, 2013
I downloaded the 32 bit version of 9 and installed it on my 64 bit laptop.I went that way as I read the 64 bit doesn't support all features and I know my GIS software doesn't in similar type of installations.
I couldn't find any more about running 32 bit version on 64 bit device so expected it should work okay.EDIT - After installation I was prompted with this fact but it did say no problem with running it that way.Just mention here as others may be confused and wonder which version will work on a 64 bit machine.
But when I got past the installation and onto registering it for an extended 30 days I was blocked with the message CSRF blocked...
[URL]
View 4 Replies
View Related
Oct 7, 2011
So, I was told I needed to use Revit for my course, went on the website and found 'free student version, download now, it's great' or some such, and downloaded it. Soon after it came up saying I needed to activate the product, and gave no indication of how to do so, I left it for a while, then, there being little else I could do, until it came up saying my trial version had run out, and that I needed to activate right then. By then, of course, I had forgotten my password, tried everything it could have been, none of them worked, so I arranged to change it, turns out I have to change it twice, the first new password only working to change it again, so now I have had to make up some new password I will never remember, but anyway. whilst I was trying to convince it to let me sign in with my new password, I found that I could actually still get into the program, and so started work. Turns out I was working in the 'demo mode' and cannot save everything I have done, but now I have finally managed to activate the product and open the real version, but i still cannot save what I did before.
So, long story short, my work is in demo mode, I want to save it, is there any way of copying it into the real version that I can now access and saving it there?
View 2 Replies
View Related
Oct 18, 2012
I downloaded the demo version of lightroom4 for testing. But in the demo there is no option (possibility) to add a watermark. Can that be?
View 1 Replies
View Related
Sep 29, 2013
I am running the SMAC demo (installed 9/13/13 - Friday the 13th !!!) and all has been fine untill today. Now SMAC will not start. I click the icon and it bounces for about 3 minutes and then stops. Clicking on the icon reveals the old Application Not Responding.
My storage volume is mounted. Don't see anything odd in the Service Monitor. A restart of mac gets the same story.
View 4 Replies
View Related
Aug 18, 2013
When starting Xara Designer or Xara Webdesigner, I always get an introduction page (getting started...) and I always have to close this page before starting. Is there an option to disable this display and get a blank page instead.
View 1 Replies
View Related
Sep 23, 2013
When I insert a new window into an exterior wall in the proposed phase, the demo phase drawings shows dashed lines on the faces of the wall, but no dashed lines running through the wall on the left or right of the window. This makes it very hard to tell where the demo opening should be. Attached is a screenshot of this issue.
View 1 Replies
View Related
Jul 20, 2011
I want to create a routine that will place selected objects on a the corresponding demo layer. Here is the outline:
enter command
select object
extract layer name of object (i.e. "CS CURB")
if demo layer exists (i.e. "CS CURB CD")
>put object on demo layer
>else create demo layer, and place object on layer
I could select multiple objects on different layers.is this possible with lisp? any good starting point for lisp programing?
View 9 Replies
View Related
Jan 31, 2011
I have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
View 6 Replies
View Related
Dec 31, 2013
Why new rooms show up in lieu of existing rooms when"show previous and demo" are set for the phase filter? Every single other existing element including doors, walls, windows, etc. show in the "show previous and demo" phase filter with the exception of rooms.
View 5 Replies
View Related
May 10, 2012
I have a fairly new DELL PC that meets all the minimum system requirements. I am running Window 7 and I can't get Autocad 2013 demo to run. It says install successful but when I try to run it it just hangs up and says "First run Initializing" and never loading. This is the first program that won't run I've ever had with this new computer.
View 5 Replies
View Related
Nov 2, 2008
Version: Photoshop CS (1)
Computer: Pentium 2.4 gHz dual core
4 Gigs Ram
Nvidia 7950 video card Win XP Home
I started to get this strange error with my Photoshop when making a new document in Photoshop and got the following error: "cannot initiate Photoshop because Photoshop cannot create any more windows".
I thought the easiest thing to do would be to reinstall (Photoshop needs reinstalling extremely often unfortunately), but now when I try and open the program it just give an alert beep and closes back up. Even though I rarely use ImageReady, I opened that up to check and it does the same behavior.
View 3 Replies
View Related
May 28, 2004
Can anyone tell me what color settings I need to set in photoshop in order to avoid this from happening? It only happens once in a while and I don't know what I've done to fix it or screw it up. What happens is that when I'm in photoshop and I do a "save for web" my document jumps to image ready and when viewing '2 up' for optimization purposes and comparison, I realize that the original view is actually duller in color and does not look like the original in photoshop. The blacks are definitely not as black.
View 1 Replies
View Related
Jun 7, 2004
when I got my first Macintosh IICX and all of my MacPaint clip art. I don't want to get rid of the clip art because since I'm still using a black ink printer and not upgrading to a color one, the clip art looks nice in newsletters and the like.
Up until this time I had been using SuperPaint which had the New Superbits editing plug-in to refine the pictures so they had the smoother and cleaner lines instead of looking jagged. With my new computer and printer, I'm also getting Photoshop CS packaged with Adobe Creative Suite Premium, which I have never used before. Since I have not received my order yet, I was wondering if anyone could tell me whether Photoshop has the capability of improving the older MacPaint clip art like SuperPaint did with the New SuperBits editing plug-in. Over the past two days, I have been trying like crazy to back-up my pictures with SuperPaint and then re-saving them with Graphic Converter. It's been so incredibly slow that I thought I would go ahead and ask you, the experts, if Photoshop can also improve the quality of my older MacPaint clip art or if I should continue to back-up my clip art like I have been doing.
View 2 Replies
View Related
Jun 17, 2008
I have just got back from the Elbow gig and pulled the images off the card. They load up in Bridge but don't have actual picture thumbnails. They are named correctly, ie: IMG_3483.CR2 but they won't open!? Error message says 'Could not complete your request because Photoshop does not recognise this type of file'
I could see them on the back of the camera.
mac users... i did a software update the other day and I noticed that there was an update for ACR. Could it have been something to do with that? And why can't I find ACR in my Applications?
View 3 Replies
View Related
Apr 29, 2013
I use Photoshop Elements 11. I am trying to upload photos to a website and the browse only goes to Windows/Pictures. How do I navigate to photoshop to upload pictures there?
View 3 Replies
View Related
Oct 30, 2012
of Adobe Photoshop v6.0.1 (quite old, I know, but it do all I want and on my old HW I did not plan/want to use any more recent version, because they are HUGE and with just a little preferences trick, I did not need to reinstall my PS - ever ), yet as Czech user, I need my software to type some special characters as well. These are looking like this:
[URL]...
Now the only problem is, that some of them PS just refuse to type. Seven small and seven caps are just wrong. See the line "for PS:"...
I battled the problem even by editing the fonts itsels, because that seems to work with Adobe Illustrator, yet this also cause the edited fonts to be useless in another programs. So I looked deeply and in the Adobe settings in directory Fonts / Reqrd are directory CMaps and perhaps editing the character map used will be better and usable solution? how to do it or even determine with file from the 96 files in the CMaps directory are right now used by Adobe Photoshop?
View 3 Replies
View Related
Aug 21, 2012
Everytime I open my CS6, it always show " Could not initialize Photoshop because the preferences file was invalid (it has been deleted)" I reinstalled it but it is still popping out.
View 10 Replies
View Related
Mar 8, 2004
when I try to save a tagra file with a alpha channel in photoshop 7 the box for the alpha channel is greyed out, with an warning sign next to it, and the line below stating "file must be saved as a copy with this selection" When I examine the saved file the alpha channel is not there!
Has anybody got any idea why?
My old version of photoshop 6, allows you to save alpha channels!
View 4 Replies
View Related
Mar 21, 2007
the soft edge feature of the eraser and the brush no longer work. I can go into the pallet and choose a soft edge eraser or brush, but it comes up hard edge. When I try to use the marquee box with a feather to get a soft edge, I again get a hard edge. I've used this technique a lot, so I think I'm doing the method properly. I have removed the preference files a number of times and have trashed the old Photoshop and reinstalled Photoshop 3 or 4 times,
View 2 Replies
View Related
Dec 29, 2008
I am working on someone elses computer and the Software settings are different. The old owner does not use this computer anymore. The swatches are set and I would like it to function how it usually does, etc. I mean, even the transparent swatch on the tool bar is not there anymore, so when I use the pen path tool, I get these white and black fills which makes it difficult for me to see the path I am meant to be following.
How do I reset Photoshop so that I can customise it the way I want it? Reinstalling the softwares is not an option.
I would like to reset Illustrator, Indesign, Dreamweaver, etc.
View 1 Replies
View Related
Aug 24, 2006
I'm having trouble with my zoom tool. If I have multiple Photoshop windows open, when I go to either zoom in or out of the top window... ALL the other windows mirror what's happening to the top window.
View 5 Replies
View Related
Feb 19, 2008
I am having in Photoshop CS2. I have had CS2 for over 2 years and have never had this problem. I am not able to open Photoshop CS2. I am getting a message that reads "Could not initialize Photoshop because a required resources text file is missing. It goes through a series of " could not load default contours, styles, custom shaphes because the file could not be found" before getting to the "initialize" window.
View 3 Replies
View Related
Aug 24, 2002
I scanned a picture on Microtek scanner and was tranfering it to photoshop when I saw photoshop embeded profile mismatch that has use the emdeed profile or covert document's color
in the working space or discard the emdeed profile. which embeded profile do you use for the photos? I attached the shot of the embeed profile from photoshop.
View 1 Replies
View Related
Jan 2, 2008
After scanning and opening a paper doc in Photoshop the image is distorted- ie its because i usually scan photographs for manipulation, i know this is due to scanner settings but i don't know how to change them there.
View 2 Replies
View Related
Jul 4, 2007
I have to build a website named Hollywood Movie Wallpaper . I've already gotten the pages done using adobe photoshop. This means that I know exactly what I want on each page and I've done the whole page by adobe photoshop. However, most website host needs the file to be in html in order for it to appear on the web. Is there any way to change an adobe photoshop image into a html file without changing the layout or anything? Coz it was hard work designing the layout and inserting the content into adobe photoshop image.
View 4 Replies
View Related
Mar 17, 2014
A co-worker needs to be able to access certain files that I have created in Photoshop CC. These files are saved as TIFFs, and as part of my workflow, I have just about everything in Groups. She currently has Elements 10 on her system, but that absolutely does not permit access to the Groups and the components within. Because of her job duties, I cannot necessarily justify adding her to the CC account since she does not need PS, AI, ID, or any of the other applications as I do. However, I can easily justify upgrading her to Elements 12...provided it does what we need it to.
View 1 Replies
View Related
