I have a question about footings. I want to fill the top part of the footing with earth. I made a model in place. But this is not a total solution. How can I extend the top pad to the foundation wall?
View 2 Replies
Now I have the wall with footings showing correctly in my sections, how can I hide the footings in elevations? (or at least have them in hidden linetype below the baseline-floor line)
View 3 Replies View RelatedI want to create sections and plans showing interior finishes. As walls are all of the same structure I used the split face tool. When applying 'paint' to the face it only gives me the options of materials not fill patterns i.e. hatches. How do I get it to apply hatches or is there a visibility setting that i need to change.
View 1 Replies View RelatedCan we align wall cut fill patterns? For instance; some of the wall material fill patterns that we use can cause confusion when other similar patterns are near by. Is there a way to control the begining or to use the align tool? It seems like Revit will only allow Drafting fill paterns to be used in defining materials "Cut Patterns". Is there a way to make them Model Patterns? Can we control the line weights of those fills?
View 2 Replies View RelatedI have an urgent need to calculate the foam fill inbetween two slabs on different planes. Also, the foam will come in 4x8' pieces. I am fairly good at family creation but am a little perplexed as how to start this one.
View 1 Replies View RelatedI have one room on a plan whose color fill will not appear, while all of the others do. I have tried deleting the room and adding a new one to no avail.
View 2 Replies View RelatedI'm a new Revit user and can't seem to get the hang of fill patterns.If I go to Manage>Additional Settings>Fill Patterns Ise a list of a couple of dozen or so fill patterns with the Drafting Button selected.
But when I try to modify the fill region in a family I'm only given a choice of about six of the patterns.how to "load" the other pattern types.
I'm unable to select the fill region. I thought it's the invisible line not checked under VV but it is.
So what's causing the fill region that can be selected and highlighted.
When I select all of my building pads and topo and move them vertically up or down by the SAME amount, the cut and fill volumes change. Apparently the cut/fill is being calculated relative to something that is NOT THE GRADED SURFACE. Maybe the Level line? I don't know. The volumes shouldn't change at all when I move both the topo and pads together! How can I trust these numbers?
View 4 Replies View RelatedWhere I need to go to change the scale of a fill pattern. I have brick walls that the brick facade scales about 1/2 of what it should be.
View 1 Replies View Relatedwhat "Excess Length Fill" setting in railing type properties.
In the sample you will see a setting, but it does not seem to be created.
I am creating wall sections and I want to change the fill pattern from drafting to model so I can minipulate the pattern. I selected a multitude of elements to change from rigid insulation to CMU and all were the same in the fact none could be changed into model pattern. Heres what I did; I slected an element, then went to the Paint Tool selected Surface Patterns, then Pattern, then Fill Patterns but it wont let me choose model.
View 1 Replies View RelatedI'm working on an assignment at present which needs to depict the site cut, fill and batters on both site and section view.
I'm trying to achieve something like this: [URL] ....
I have toposurface happening in both the existing and new construction phases, and have modified the new construction one.
I can get it to show the existing and new ground levels in section view when I change the phase filter, but I can't seem to be able to change the hatching to represent cut and fill. I even tried detailing it in, however I can't seem to get lines to snap to the section cut toposurface.
Is it possible to place the surface area of an annotation fill, into a schedule?
View 1 Replies View RelatedHow can I edit the department names, once rooms have been assigned to them?
View 4 Replies View RelatedI've utilized the Plywood-Section detail component out of the Imperial
Library, and it runs left-to-right, no matter the orientation of the element I drew. Messing with the Fill Pattern settings, it looks identical if I set the Plywood-Align pattern to "Align to Element", or "Orient to View". Nothing changes.
When I rotate a view on a sheet, the fill pattern of a filled region doesn't rotate with it.
View 2 Replies View RelatedHow do I get it so that when I draw a shape it will fill with color? In my options bar there is a rectangle with color where I can choose that, but sometimes that's not up. How do I pull it up?
How do I fill a canvas with color without having to cover it with a large rectangle to fill? I've gotten answers to this but none has solved the problem.
Okay, so it's been a while since I've done one of these, and I haven't done one on 2014 at all yet.
I've got a fairly simple part, it's about 6" long x 3" wide, less than 3/8" thick, without a whole lot of complex geometry to work with. I've built up my whole mold for it, and that went okay, but the fill analysis seems like it's taking forever. Like hours. It gets to the "Fill" stage, gets just a sliver of green on the progress bar, and then sits.
Last time I tried this was on my workstation at the office, using 2013. It didn't take nearly this long, and the part was much larger and far more complex, with a significantly slower computer.
Is something broken with this in 2014? I guess I can just let it run overnight, see what happens in the morning ...
Product Design Suite Ultimate 2013, 2014
Autodesk Inventor 2013
Work: Dell Precision T1600 (Xeon E3-1280 / 16GB / 512 GB SSD / 250 GB (Internal) / 1 TB (External) / Quadro 600)
Home: i7-4770k / ASUS Z87-Pro / 16GB / 250 GB SSD / 1 TB HDD / 3 TB USB3 HDD / 2xRadeonHD 4870 in CrossfireX
Laptop: Toshiba Satellite P755-S5269 (i7-2630QM / 8 GB / 250 GB SSD / 750 GB HDD / GT540M)
see xcf attachment...
I used a heart fill pattern of the right 75% of the picture and the left 75% of the picture is selected overlapping the first fill in the background... I want to fill the selected background area with a flame fill pattern where it overlaps the selected portion of the heart pattern as well as the transparent area... 'overlay' looks better but Gimp is FAILING to fill the transparent areas, it ONLY fills the overlapped heart pattern portion of the selected content!!! I even tried filling the transparent area with 'white' then filling the selected area, but it STILL ONLY wants to overlay fill the heart pattern, it STILL leaves the rest alone!!! it doesn't matter if the background is white or transparent, it leaves that alone and ONLY fills the heart pattern area of selected portion of the image!!!
In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
When I use the fill tool to simply 'fill' a selection, it does not completely fill it. There is an ivisible barrier or line that prevents it from filling all the way to the edge. Do you think I have my settings wrong?
View 2 Replies View RelatedI just added a fill/texture to an image and now when I create more objects, the fill is still there. How can I re-set the fill gallery back to no-fill?
View 3 Replies View RelatedI spend 12 hours a day in illustrator and some functionality seems to simplistic and ultimately annoying.I'm using Windows 7 64bit. Adobe Illustrator CS6
1. Please auto switch between Stroke fill and fill when I select text. 99% of my time is spent only using fill on text. I would rather manually switch to Stroke when I want to add a fill to it rather having to switch to fill each time.
2. Same for Stroke, from point 1.
3. Add an auto layer for Guides. When I am using the Scissors tool, the majority of the time I don't want to cut my guides up, I would rather instead cut up the shape below it. Again manually changing the layer to select the guide would be preferable.
4. I personally never use the Eraser tool and I switch to the Scissors Tool. Without fail every time I launch Illustrator I have to switch from the Eraser Tool too the Scissors tool. Please add cookies or something so I don't have to always switch to the Scissors Tool.
5. Move "Align to Pixel" toggle somewhere outside a file menu.
Im making some little buttons with filled backgrounds. Below is an example. Is it possible to adjust the resolution of the fill, lets say smaller, to make it look more crisp on the button?
[URL]
The above looks nice, but the one below, this is suppose to be snow but the resolution is so large you cannot tell what it is.
[URL]
I can do a lot of neat things with PSCS2 but for some reason can not figure out how to fill an object.. i.e. trace the eye and then fill with colour.. when I use shft+F5 it puts a fill in spots no where near my outlined area?
View 3 Replies View RelatedI want to be able to 'paint' people's skin and other things with that pattern. What's the best way to do that? to where the background of the red dots is transparent.
View 7 Replies View Relatedhow to make a ribbon in Illustrator, but I've become confused to the second part of part 7."With the text selected, go to the Appearance Panel and add a White fill, and then a fill in a dark shade of the ribbons main color...".
I've changed one fill to white, but I don't have the option to change a second fill. If I change the Stroke color, it doesn't look like the text shown in the screenshots.
When I am trying to cut sometghing out, a box appears with no fill in it that erases everything inside of it. I'm just trying to use the quick selection tool.
View 3 Replies View RelatedThe geological community has recently standardized fill patterns that we use for geologic maps and illustrations. The U.S. Geological Survey has put out .eps files that can be used to create a swatch library in Adobe Illustrator (see Section 37 at [URL]). find a way to import these .eps patterns so that I can use them to fill objects created in CorelDRAW.
View 6 Replies View Related
