Now I have the wall with footings showing correctly in my sections, how can I hide the footings in elevations? (or at least have them in hidden linetype below the baseline-floor line)
View 3 RepliesACA2011
So I've got a Construct that is the building model. I also have a View file for my 2D extracted elevations. I've just 'Refreshed' one of the elvations based on some updates I did to the construct model. But when the 2D elevation refreshed, it's surface hatching (roof tiles) scaled itself down considerably. What controls this? I need to have that hatching scale back up and don't know how.
How to get the Axis line on a steel Member (W18) to show when creating 2D Elevation or Section of It. I have been able to create center lines by placing a 3d grid and then changing from No Plot and it creates center lines on the elevation. But all jobs do not require a 3d grid so I would like the axis line form the member to show in the 2d elevation.
View 1 Replies View RelatedHow come i cant see the changes to the 2d section after adding objects to the model. I have refreshed the section and have also change to a different 2d style, however if i create a new section, i am able to see the changes on this new section but not on the old one. Is there any switch to this.
View 7 Replies View Relatedwhat the roof elevation property relates to and why? Actually, I know that it is the initial insertion point of the roof baseline, but why doesn't it update with grip edited changes in the elevation of the baseline? See the attached file. The three x-lines converge on 0,0,0. The roof elevation is stated as 0. Obviously that property is meaningless. Considering the importance of roof elevations and making them meaningful, you'd think there would be some rhyme or reason to that property.
View 4 Replies View RelatedI am receiving the error " the tool cannot be found in the current workspace" when clicking on the elevation call out tool under the annotate ribbon. How do I go about troubleshooting this issue?
View 6 Replies View RelatedI've attached a structural member. Is it possible to tag each end individually and have ACA report if it's the high end or low end of the structural member?
View 1 Replies View RelatedI have a question about footings. I want to fill the top part of the footing with earth. I made a model in place. But this is not a total solution. How can I extend the top pad to the foundation wall?
View 2 Replies View RelatedIn my project navigator, when I want to open an Elevation file it says to Read-only. How can open the file to work in it.
View 2 Replies View RelatedACA 2011
So, I extract elevations from my model. No prob. Works perfectly. I then often edit linework to change some linework colors...works fine. However, What if I want to change/edit a Hatch? When I click on 'Edit Linework', the hatch automatically turns off to allow me to edit the linework... Can one edit the Hatching?
Can I use AEC Dimension in a Section/Elevation View in ACA? So, when an Wall height changes, the AEC will change too after refresh the section/elevation.
View 1 Replies View RelatedIn generating 2D elevations from ADT objects I noticed the muntins didn't match. See attached image for example.
Running AutoCAD Architecture 2012.
I'm running Architecture 2013. When creating an elevation object from a 3D model, the hidden lines are not being removed. I've never seen this before, though I have been using Architecture and ADT for years. I've recently upgreaded from 2009 to 2013, and VOILA!
Hidden lines not removed from elevation and section objects. I've tried various tests, to no avail.....
Is it possible to project an elevation drawn in CAD onto a curved wall in Revit?
The pattern of the cladding is very complicated and varies in both directions (curves) so it was easier to draw in in CAD, but I would like to project it on my curved wall in Revit, co that I could calculate the cladding areas accurately.
ACA 2011
Whenever I want to pan I get the 'hand'. I click and drag...no prob. However, I want to do a controled pan (to fix a moved elevation in a viewport on a sheet). I want to click a point, and then pan, say, 50' orthogonally. Is this possible?
I placed walls at 12'0" elevation as they wereconflicting with walls below (overlap). I can't see them in plan view - In 3D iso view they are visible.
View 4 Replies View RelatedAs I continue my learning of AutoCad on the PC after having been a Mac CAD (non-AutoCad) user for 15+ years, another question has cropped up. My boss wants the circular "heads" of the elevation and sectional callouts to be smaller on the finished drawings. How can I control (or override) the default size of these? Or do I need to override on a case by case basis? I've searched these and other forums and what I am getting a sense of is that AutoCad controls those sizes pretty tightly so they remain annotative and AutoCad sets them at the size it thinks they should be and changing that size is not a simple process.
View 2 Replies View RelatedI went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
ACA 2011. I would like to copy the "standard" wall style add a surface hatch and display that in an elevation (exterior) view. I have played around with this and due to many different places to edit the materials.
I have the elevations created. When I go back into the construct and edit the wall style do I have to re-create the elevations to see the hatch? Or I think I just have something set incorrectly in the style.
I am trying to create a property definition that will display the elevation of a space object. I looked through the automatic properties and did not find anything that looked like the elevation.
I have tried the following but was unable to achieve any success.
RESULT="--"
On Error Resume Next
Set AcadApp = GetObject(, "AutoCAD.Application")
Set Obj = AcadApp.Activedocument.Objectidtoobject("[ObjectID]")
RESULT = Obj.elevation
That formula does work if i swap elevation with say height, width,length or any of the properties found in the automatic property list that are a single word. I know the elevation is there I just don't know how to access it.
I don't know if I am doing something wrong but I made exterior elevations in views for a building and the interior partitions are also displayed. An exterior elevation should only display exterior walls.
View 8 Replies View RelatedI am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies View RelatedWhen I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies View RelatedI updated my computer to windows 7 32 bit and need the file: AdskHwCertificationDatabase.xml - version 17.1.0.4 so that I can find out the correct driver for my OS and my quadrofx 1700 graphics card. Autodesk doesn't support 2008 Architecture and the on;y file I can find is buried in a torrent file with a pirated copy of 2008 and I DO NOT wish to download that.
View 3 Replies View RelatedIm currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies View RelatedThe content browser in AutoCAD Architecture 2013 does not seem to be working on a standard users computer. The profile has been rebuilt alongside a repair/reinstall through the control panel.
Ctrl+4
Tools > Content Browser
and typing content browser in the command do not result in anything.
I do not get why new Archicad Architecture has 3d modeling when Revit architecture already provided for it. What is the different between those two? I really want to know the difference. It bothers me somewhat about them.
View 4 Replies View RelatedI am currently using old school ACAD 2002 and I can't get the x and y axis arrows to go away. How do I do that?
View 1 Replies View Relatedcan hide the help box in top right corner.
i want to hide this:
helphide.JPG
I have 2 viewports. 1 view from the front and another from the side. Is it possible to "hide" the front then hide the other side without it affecting what was just hidden in the other view?
This is going to be for printing purposes only.