AutoCad 2D :: Can Hide Help Box In Top Right Corner
Aug 23, 2011can hide the help box in top right corner.
i want to hide this:
helphide.JPG
ADVERTISEMENT
Illustrator :: How To Change Path Corner To Round Corner Several Times Over
Jun 6, 2012I have a banner heading that is more or less outlined text. I want to give all the corners a rounded corner and at the moment would just do it all by hand, one at a time. So I want to go from a to b:
But I would like to find an easy way to make all corners the same diameter regardless of the angle too.
Illustrator SDK :: How To Get Smooth Corner Shape Every Corner
Jun 9, 2012I draw square. The 1st point and last points are left-top and finally set 5 points.The direction is clock-wise and made closed path.To get smooth-curved polygon shape, I used API 'PointsToCurves'.But, the first and last points are connected by cornered (not smooth) point. Here's result.
Maybe, I must set that square is closed path, to API, but it seems to be no parameter to set.So, I want to know how to get smooth corner shape every corner.I use SDK CS5.
AutoCad 3D :: How To Get Box Corner Rounded
Jul 18, 2012Modelling a solid in AutoCAD 2008, I am a " good enough " user of AutoCAD in 2D ( at least for what I need ) but almost a beginner at 3D modelling.
I can't get a cube corner rounded. The portion of the corner that is to be subtracted from the box is defined by three arcs, each one at a different face, you can see more clearly what I mean if you see the attached file:
BOX_ROUNDED_CORNER.dwg
AutoCAD 2010 :: Big A In The Left Corner?
Mar 23, 2012This may be a silly question but what is the big A in the upper left corner?
View 6 Replies View RelatedAutoCAD .NET :: How To Select Corner Points
Jul 17, 2011I just want to select corner points and get the coordinates of all the points,and get all the points sorted by their X coordinate.What I am supposed to do?
View 4 Replies View RelatedAutoCAD Inventor :: Create A Hem In A Corner?
Jul 26, 2013How can I create a hem in a corner? The default setup overlaps them and throws an error. A simple "miter" will correct the problem, but I cannot figure out how to do it!
View 4 Replies View RelatedAutoCAD Inventor :: How To Stop Chamfer Before The Corner
Dec 27, 2011I have chamfer going around my part but I need to make it to stop 2mm's before the corner. How is this done?
View 2 Replies View RelatedAutoCAD Inventor :: Add A Radius In A Corner And Its Not Cooperating
Apr 12, 2012Trying to add a radius in a corner and its not cooperating. Take a look at this image. Notice how the one radius curves around the part, but the other one does not? I know these two look different because they are different sizes. I would like to get the 1in radius to go straight across like the R3/4, but it will not do it. I've tried the options under the chevron, but nothing gives me what I want.
View 9 Replies View RelatedAutoCAD Civil 3D :: Get Grading To NOT Radius Out In Corner?
Feb 21, 2012I'm grading this pad site from EL.215 to EL213 at a 2:1 slope. I use "grade to elevation" but I don't want the corner to fillet. I need the grading to fill in to the retaining wall (red line). I tried using infill but I can't get the fill slope display to show up.
View 9 Replies View RelatedAutoCAD Architecture :: Wall Corner's With Timbers
Aug 6, 2012I'm trying to draw a wall in plan that has Wood Timbers in the corner. The problem im having is that if i use a Body Modifier it puts dark heavy lines within the wall. And Plan modifiers don't seem to be working. I tried to use an interference condition and that also did not do the trick.
I tried to force a cleanup and that did not work either.
AutoCad :: Hidden Lines Snapping To A Corner?
Feb 10, 2011I am very new to autocad and i am trying to duplicate a template in my text book. (Yes, i'm an old new student). I have a drawing that i am trying to add a hidden line to and when i pick my start point and then select my second point, the line will snap to the nearest corner instead of staying where i put it.
View 9 Replies View RelatedAutoCAD Inventor :: How To Dimension For Corner Intersection In Drawing
Oct 24, 2013dimension bend parts with corner intersection. Is there any option in Autodesk Invenor Drawing so that i can give dimensions as shown in attached image.
View 2 Replies View RelatedAutoCAD Inventor :: Getting A 45 Degree Corner On Flanges Of 2 Different Sizes
Apr 6, 2012I was just wondering if there is an easier method of getting a 45 degree corner on flanges of 2 different sizes. 1 flange is 1" and the other is .75". I have been cutting the .75" flange down and adding to the face of the 1" flange.
The corner I'm talking about is on the far right of the part.
AutoCAD Civil 3D :: Command Line In Corner And Not Movable
Jun 11, 2012I have the command line in the upper left corner as a floating window which auto hides. Its not clickable, dragable, nothing. If i reduce the C3D window it is still locked to the top left corner of the screen on top of the windows desktop.
COMMANDLINEHIDE doesn´t refresh the situation. I just want my commandline back on the bottom.
AutoCAD .NET :: How To Insert Table By Choosing Bottom-right Corner
Jul 6, 2011I have to make it possible to insert table by choosing any of it's corners. I cannot get it to work with choosing bottom corners - I can't get the exact height of the table.
The sample code of the one-row table is:
acApp.Document doc = acApp.Application.DocumentManager.MdiActiveDocument;Editor ed = doc.Editor;Transaction tr = ed.Document.Database.TransactionManager.StartTransaction();try{ BlockTable bt = (BlockTable)tr.GetObject(doc.Database.BlockTableId, OpenMode.ForRead); Table tb = new Table(); tb.InsertColumns(0, 24, 1); tb.SetRowHeight(4); tb.Columns[0].Width = 24; tb.Columns[1].Width = 24; tb.Cells[0, 0].TextHeight = 2; tb.Cells[0, 0].TextString = "some text"; tb.Cells[0, 0].Alignment = CellAlignment.MiddleRight; tb.Cells[0, 1].TextHeight = 2; tb.Cells[0, 1].TextString = other_text_from_variable; tb.Cells[0, 1].Alignment = CellAlignment.MiddleCenter; tb.HorizontalCellMargin = 0; tb.VerticalCellMargin = 0; tb.GenerateLayout(); tb.Position = // exactly... what should I do here? BlockTableRecord btr = (BlockTableRecord)tr.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite); btr.AppendEntity(tb); tr.AddNewlyCreatedDBObject(tb, true); tr.Commit();}catch (Autodesk.AutoCAD.Runtime.Exception ex){ ed.WriteMessage("
ERR: " + ex.Message);}finally{ tr.Dispose();}
Now... I'm trying to make 1-row table width the height 4. I should set tb.Position by just subtracting 4 from the Y-value of the clicked point... NOT.
tb.Height gives me 4. But I get the table with height 5.667. And I can't just use that value for subtracting, because even then, bottom-right corner is about 0.2 above or below clicked point... (X-value is correct and equals the clicked point's X-value.)
The same thing happens when I insert a table with the number of rows depending on the number of the records selected from DB. The same thing happens, when I use obsolete .NumRows and .NumColumns. What am I missing?
AutoCAD Civil 3D :: Corner Point Label Style
Apr 28, 2012i have a building corner point label style that labels the corner of bldgs with the elev on top of an arrow and the full description of a bdlgc on bottom of arrow...rotated at 45 degrees....
i have 3 components...a block of an autocad leader i call an arrow that i just drew from left to rt on layer 0 and named the component arrow...then i have the elevation and the description
problem is that when i rotate label to move it out of way of obstructions it flips the elev on bottom and the desc on top!!
i have tried a number of combinations of anchor pts and changing the "flip anchor pts with text" to true/false under the general tab of the label style composer...
i cant get it!
AutoCad 2D :: Ctrl+V Origin Not At Bottom Left Corner
Dec 17, 2013Normally, when you select an object or a group of objects and you go to copy it/them with Ctrl+V (NOT Ctrl+Shift+V), AutoCAN'T will use the bottom left extents of the object(s) as the base point for what you are pasting. For whatever reason, when I select+copy+paste an object, the base point/origin/whatever you want to call it, is way off and not even near any of the objects.
How can I reset this?
AutoCAD 2013 :: Increase Height Of One Corner Of The Wall
Mar 24, 2013I created a wall via RECTANGLE/PRESSPULL to a desired height. But I need to be able to increase the height of one corner of the wall. Not quite sure how to do this.
On the attached picture, corner A needs to remain where it is, while corner B needs to be 3' higher.
AutoCad :: How To Get 0,0 At Bottom Left Corner Of The Paper In Paperspace
Feb 2, 2009Trying to draw a titleblock for a college assignment and its supposed to start at 5,5 but that is in the middle of the paper (A3 setup). 0,0 is somewhere in the middle too - how do i get 0,0 to be the bottom left corner of the paper in paperspace??
View 9 Replies View RelatedAutoCad 3D :: Find Shortcut To Be Able To Slice Off Corner Of Object?
Mar 30, 2013I want to find a shortcut to be able to slice off the corner of an object (see picture below). Is there some sort of build in function to do so?
Compare.jpg
I have been manually doing this by (1) creating a square surface (2) re-positioning it over the corner and (3) using the slice command to ultimately slice off the piece and delete the excess.
As you can surmise, step (2) [re-positioning that damn surface over the corner], takes FOREVER.
AutoCAD Inventor :: Sheet Metal Corner Joint
Jan 13, 2013How to joint this corner together for becoming 45 degree corner shape?
View 9 Replies View RelatedAutoCAD Inventor :: How To Round Flanges Inside Corner
Mar 6, 2013I have couple of problems that I haven't managed yet on my own.
1. How I can get "smooth" bends without those "steps"? See part: Smooth Bend
2. How I can round that Flange's "inside" corner? Just smooth Corner Round like those other corners have. See part: Corner Round
AutoCAD Inventor :: Sheet Metal Corner Chamfer
Dec 18, 2013Been toying with sheet metal stuff here lately. Going from solid modeling to this feels kind of backwards to how you design.
Anyways, I have part (attached). 300° round. So far checks out to how I want. Please look at chamfer #2. It is in the correct location, but it is not letting me do what I want...maybe I havent started this simple peice in the correct fashion.. What I need is the chamfer in the same 'wall' where it is, but I need it 4.97° x 23" long AROUND the part.
Inventor 2014 PDS
AutoCAD Civil 3D :: Display Elevation At Bottom Left Corner?
Nov 21, 2013Is there a way for the elevation of surface to be shown in the bottom left corner along with the easting and northing as the cursor tracks over the surface? currently only the easting and northing track with the cursor the elevation remains 0.00
View 4 Replies View RelatedAutoCAD Architecture :: Get Rid Of UCS Icon / View Cube Thing In Top Right Corner?
Mar 23, 2011is there a way to get rid of the ucs icon/view cube thing in the top right corner?
I open up an old drawing with multiple viewports and half of them have this symbol. So I assume that there is a way to turn it off. Again, trying to make computer faster and not have a graphic symbol in all of my viewports.
AutoCAD Inventor :: Corner Snaps In Sketch Mode Will Turn Off?
Mar 8, 2012Sometimes corner snaps in sketch mode will turn off. why does this happen and how do I fix it?
View 1 Replies View RelatedAutoCAD Civil 3D :: Offset Start Corner Of Cross Sections?
Mar 11, 2013How do you Offset the START CORNER of Cross Sections. I see where you can chose, Bottom Left, Top Left, etc...
I need to move the START CORNER Down and Left. See Attached.
AutoCAD Inventor :: Sheet Metal - Extra Material In Corner
Oct 28, 2011I am attempting to model an existing part as it is currently being manufactured a simple hopper, and am having an issue with a corner.
Look at the converging corner of the attached file.
How could this be done to avoid the problem? Or can it? 2010 Suite-SP4 64bit
AutoCAD Inventor :: Getting Green Recycle Arrows And Corner Indicators In IDW File?
Oct 14, 2012why i am getting green recyle arrows in browser and green corner incidicator in .idw file.
What does it represent? if it comes because of design error then where to look for the mistake.
AutoCAD Inventor :: Control Corner Seam In Sheet Metal Styles
Dec 7, 2012I want to control the Corner Seam in the sheet metal styles but it seems not possible to do that.Now i wondering if this can controled in iLogic.
I want to control the settings which you can make in the Corner Seam.In the attachment are two drawings white different corners, overlap.Those i want to control in different sheet metal styles.Your drawings are only as good as the symbols that complete them...
