Revit :: Showing Cut And Fill - Site And Section View
May 22, 2013
I'm working on an assignment at present which needs to depict the site cut, fill and batters on both site and section view.
I'm trying to achieve something like this: [URL] ....
I have toposurface happening in both the existing and new construction phases, and have modified the new construction one.
I can get it to show the existing and new ground levels in section view when I change the phase filter, but I can't seem to be able to change the hatching to represent cut and fill. I even tried detailing it in, however I can't seem to get lines to snap to the section cut toposurface.
View 7 Replies
ADVERTISEMENT
Dec 13, 2012
how to show section view in base view with out projection the component.
View 2 Replies
View Related
Oct 26, 2013
bring back my site plan view!, and the ability to use shadow and realistic material!because when did another site view i am unable to use shadow and realistic view!
View 1 Replies
View Related
Aug 2, 2012
I've got a model and i created a new level as normal, propogated extents etc but when i created as section North to South (Vertical) in the model the level does not show. When i create a section from East to west (horizontal) then the level appears fine. I've tried creating many sections and this is always the case. If i select a level in the section and click on select all instances in entire project the number includes the additional level but i can't see it. It is not hidden in the view, not on a different workset or anything unusual...
View 5 Replies
View Related
Dec 17, 2012
In Section View the material region is filled with a solid hatch, this obscures other objects such as the bounding surfaces and labeling.
For some reason the material hatch is always on top in the display order Manually forcing it to the back in the display order is possible. This is not a reasonable solution due to the time involved and repetition.Transparency allows the objects beneath to be visible but their tool tips are not functioning due to the overlap. The same would apply to using something other than a solid hatch.
The primary concerns are:
Visibility of all objectsSelectibility of objectsTooltip functionality
View 7 Replies
View Related
Jun 27, 2013
I am working on setting up exagerated (10X) section views. I would like to show the horizontal and vertical scale below each section. I have used the code below in the Axis Title Text. The horizontal scale displays correctly (taken from the overall drawing scale)
How would i edit the vertical code below to show the vertical scale 10 times smaller?
SCALE: HORIZONTAL = 1:<[Drawing Scale(P0|RN|AP|GC|UN|OF)]>
VERTERTICAL = 1:<[Drawing Scale(P0|RN|AP|GC|UN|OF)]>
View 5 Replies
View Related
May 7, 2013
I have made my sections cuts through the floor plans, but when I view them, the walls I have cut through are not poched in to show that there is a solid wall there.
View 1 Replies
View Related
Apr 20, 2012
I have sections cut from floor plan that show up on my exterior elevations. I am able to stretch the tag ends using the blue dots. I also have placed section marks on the elevations that reference other section views. With those tags I am unable to stretch them up and down on the elevation views. When I try, they disappear. I am not stretching them outside of the annotation crop.
View 1 Replies
View Related
Mar 23, 2012
2 part question:
1) How do I keep a section line from showing up in two different elevations:....have a section line in east elev.....it shows up in same spot in west elev.....but the view is the east elev....only want to see section line in east elev?
2) While looking at my west elevation, I can see things in the east elev, which is 100' apart.....how do I keep from seeing(and selecting!) things in the east elev while looking at the west elev?
View 1 Replies
View Related
Jul 26, 2013
Revit 2014.
We created floor plans, created actual wall sections. Then we placed countless section markers that Reference Other Views with the SIM text by them. I would expect to go into the roof plan or elevation and see those same section markers. For some reason they do not show in any other view besides the view in which they were placed. The actual wall section markers show up. Just not the ones placed that reference another view.
Same in reverse. Go into elevation, draw a section marker that references other view. I would expect that marker to show in plan. But again no. I have not had this issue in previous versions of Revit. Just so far in 2014 this has been killing me trying to figure it out.
All views are set to Discipline: Coordination, and the original section markers are set to hide on scales courser than 1"=400' so they should show. Visibility graphics has sections turned on. There is nothing that shows with the light bulb.
View 1 Replies
View Related
Oct 11, 2013
I accidently deleted a section marker from a plan view. The section still exists and in shown in other plan views. I feel stupid for asking, but how can I get the section marker to reappear on the original plan view?
Infrastructure Design Suite Premium 2014
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), Win7Pro64, Quadro K4000
View 3 Replies
View Related
Apr 13, 2013
Is it possible to get the wall fill pattern to show up in plan view but not in a specific section view? I tried the detail levels, Course, medium, fine, and of course the hatch pattern doesn't show up in course, but then the wall components don't show up either.
I am in a section view where i want to show a repeated cmu detail component up the wall as part of a detail, but then the hatch pattern is displayed behind it. I don't want to remove the hatch pattern entirely because I still want it to be displayed in the plan view.
View 2 Replies
View Related
Jan 27, 2014
When I rotate a view on a sheet, the fill pattern of a filled region doesn't rotate with it.
View 2 Replies
View Related
Jan 29, 2014
I am creating a two-storey single-family house. The exterior wall assembly is Core Boundary, 3/8" Stucco (we apply a Stucco material to our Sheathing so in Section we aren't showing a finish material on the exterior), 5 1/2" <By Category> (our studs), Core Boundary, Air Barrier, 1/2" Gypsum Wall Board. We draw the floor system to the face of our studs and extend our walls to the bottom of the floor system, then when we join geometry the floor cuts out the wall leaving only the wall sheathing extending to the face of our floor system.
My problem is when I create a 3D perspective view with the camera my floor system is showing through the walls. It seems to thin out/disappear the larger the perspective view is on the page, but I can only make it so big on C-size page.
Is there a way to hide what Revit shows detailed behind the face of a material?(I tried hiding the floor system in my perspective view but it stills shows the floor outline, I'm assuming because it is being cut out of the assembly).
View 2 Replies
View Related
Apr 24, 2012
I'm trying to find a way of filtering the 'work in progress' section visibilities from a plan by view filters. The filter I use is 'Sheet Name' equal '<None>'. Then turning off visibility. It works when used in the Browser organisation filters but not in the view filter for the sheets.
I don't want to create a check box or dialogue box for the sheet as this will add to the required maintenance.
View 1 Replies
View Related
Feb 17, 2013
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
View 4 Replies
View Related
Dec 20, 2011
I would like the grading of a site to happen only on part of the site; I need the rest of the site to remain unchanged.
I thought I was finished with this project, the volumes seemed about correct, and then I noticed in the comparison surface (showing areas of Cut and areas of Fill) that soil is being taken from parts of the site that need to remain undisturbed. This is a residential site with a conservation easement and other forested areas that we won't be disturbing.
How do I set a boundary or breakline (or what?) to limit the grading/cut/fill to the area I want?
AutoCAD Civil 3D 2010
View 9 Replies
View Related
Apr 12, 2013
Just noticed this at Blackmagic Design's web page for it's Ultrastudio line.It clearly shows Autodesk Smoke in the supported software! Something in the next release maybe?
View 2 Replies
View Related
Jul 17, 2013
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
Sep 24, 2012
The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
View 6 Replies
View Related
Nov 19, 2011
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies
View Related
Oct 12, 2012
I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies
View Related
Nov 3, 2012
So, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us. so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.
View 6 Replies
View Related
Nov 8, 2012
I am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
View 5 Replies
View Related
Oct 16, 2012
My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies
View Related
Jun 30, 2013
i just started working with Revit Architecture 2013 and im doing this tutorial for a basig design but at one point it says go to Massing & Site tab in the ribbon, and it's just not there?
View 5 Replies
View Related
Mar 16, 2011
How to import an engineer's site plan w/ contours so that it displays correctly (i.e., scale, topography, etc.), then use it in elevations, 3d perspective, section?
View 2 Replies
View Related
Oct 21, 2013
Background: infrequent user who is in AutoCAD withdrawal but forcing himself to move to Revit.
I've just started a new project. I've imported a survey done in AutoCAD and converted it to a Topo surface.
The surface appears in two of the Elevations (East and North), but not the other two. I have two empty views. I've turned off Crop View. When I did this and a Z A, I was able to find the East and North elevations and move the views over to them. However, I can't find the elevations in the other views.
View 3 Replies
View Related
Nov 28, 2012
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
View 5 Replies
View Related
Oct 1, 2012
how to create a section view for a pond other than quick view.
View 2 Replies
View Related
May 6, 2013
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies
View Related
