Why isn’t my DWG link from one RVT visible when I link it into another? I.E. I link my site dwg into my Arch central and want the Site to be visible when I link the Arch into other files. I want the Arch to hold the Site link but be able to see the site when the arch in linked into other models. I could have sworn I have done this in the past but can’t get it to work now for some reason.
View 2 RepliesWhy Revit 2013 when the walls are installed on some laptops is clearly visible.
View 1 Replies View RelatedFor some reason on certain cad files when linked into revit. when I hit the align button. the linked filed doesnt properly select the lines, it selects an area near the line, which causes it to not properly line up to the revit line work
View 1 Replies View RelatedI could not export the revit data using DB link as nothing is getting highlighted to click on next.
Is there anything extra that I need to install apart from MS Access or should I follow a specific procedure before I go to addins.
I inserted a CAD link "this view only" and I cannot now get it to turn on in any other view. I used this option so I would not have to hide it in every view. Now do I have to delete it and start over inserting it so it shows up everywhere?
View 2 Replies View RelatedI have a structural model linked into my architectural and I cannot seem to cut the link in sections. All I can see is the 'elevation' of the link whilst my architectural cuts. I have the link set as by host view and the view extents correct.
View 4 Replies View RelatedWhen I tag a Revit Link with a multi category tag I can't edit it. I need to give it a number so it can appear in my schedule. I have checked the "include elements in linked files"
View 1 Replies View RelatedSee attachment.
I can't figure out why the bas is visible through the floor :s while the middle part is not. The part where you can see the color of the stairs is cut out of the floor.
The bread shaped object is a structural concrete column with two corners rounded.
Why can I see the new wall's lines ghosted through a structural column?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
When i hide an element in a particular view by rt click .- hide element. It does hide ..How do make it visible when required?
View 7 Replies View RelatedRevit 2012 .I have a topo file linked to the main building file.I am trying to render a 3d exterior view of the building (new construction ).I see the linked topography in black lines in my elevations.but not in the 3d view.
The question/ problem unsolved is how to get the site/ ground to be visible as per the linked topography in the 3d view of the main file . All I see is the building in the air , with a very light greyed site in a block form. I would like to see the site in earth: soil material for me to render the exterior view.
I want to show a linked view from another proyect that has an underlay ceiling plan,I'm using By linked view option to show exactly the same view from the original project but the underlay RFP doesn't appear. I just want to show the outline of some skylight diffusers from the ceiling plan.
View 1 Replies View RelatedAn architect sent me his revit file, it contains the full model and all the floor plan views and drawing sheets. He has floor plan views set up for each floor and some enlarged views as well. On each floor plan view each room has a tag that contains room name and room number and every door has a tag that contains the door number.
When I create a new file and link in his file so I can then start working, doing what we need to do, adding devices, etc. The problem is, the architect's room tags and door tags dont link in, and if they do I cant see them. I've gone through every possible combination in the visibility/graphics options to no avail.
Room and door info linking in should be a basic function of revit; how could autodesk expect mech, elec, plumbing engineers to create drawings that have zero room and door info?
If it matters, I'm working in Revit 2010.
ive recently started to work with DBLink and access 2013 to make take offs mainly. Today i made a small project to test some ideas and found an inconsistency between the material areas and the area of the element, a wall in this case, to which the material is apllied. I think they should be the same, or at least very close, but that´s not the case when i export to access. I've attached a image with a material takeoff schedule from revit and the correspondent query from access (element type name, element area, material name, material area, material volume, material area/element area). The revit one seems correct, but in access the material area values are very different. Initially i thought it would be due to units difference, like the material area were in sq cm and the element area in sq m, but the relationship between them isn´t 10, as you can see in the calculated value. Then i added the material volume to the schedule and query and the results on access are even more strange, i can´t even imagine where this values came from.
I´m using revit architecture 2012
I am having trouble placing a wall foundation under a curtain wall in my project. Revit says that a foundation has been added but it is not visible in any view. I've tried editing the visiblity properties but that didn't fix the probelm.
View 3 Replies View RelatedI am already using autocad and Covadis (because I'm road-design, etc. ...-); I'm new building and I use Revit Architecture 2011
Already I do not understand why my isolated foundations are not visible in plan view when the footings are beautiful and well visible in the plan view,...
i want to create a schedule that will show which views are visible within a Revit 2012-2013 plan view. Any way to do this or a work around?
View 7 Replies View RelatedJust upgraded to REVIT 2013 and now many types of lines are not visible on screen- randomly it seems. Also, sometimes they don't print, either. I've tried increasing the fineness of the view, changing the material definitions, etc. Most often this is happenning when I have opened an old file and had it automatically update the file. Also, it seems to happen within asurface texture, but it is not limited to that circumstance.
View 1 Replies View RelatedMade a family with two family types, a red and a blue. when i load it into my project it comes up gray..Another component family the color comes in fine
View 1 Replies View RelatedWe are new to Revit, and have done a couple of projects in Revit. We have separate models for arch, mech and elect (no struct, this is done outside our office). We currently link models to each other as needed, the architect will link mech and elec. The mech eng. will link arch and elec and so on. Mention the use of a blank model onto which you link all models. I never got a chance to ask the individual how they use it or how it would benefit the process.
View 1 Replies View RelatedHow to get the Globe link extension to work with 2013. I keep getting the error
"You must turn off Google Earths Terrain before acquirement"
I get this even after turning off the terrain feature.
I have installed the latest version of Google Earth.
Is it possible link one view into multiple sheets? I would like one key plan to appear in all of the plan sheets.
View 6 Replies View RelatedI have had numerous problems trying to print from 2014 using the setting "Visible portion of current window". This feature was never that good, anyway, but now it seems to be WAY worse. I'm spending 5-10 minutes to just send something to the printer that should only take 5 seconds.
See the attached images of what I see on screen, the print dialog boxes and then what I actually get. The "Center" option doesn't function properly and now I must manually adjust the margins to print what I see on the screen.
I drew a structural wall with the 'rectangle' function, but this error appears and the wall is not visible in the floor plan 'level 1' ?
"Warning: None of the created elements are visible in Floor Plan: Level 1 View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings."
I'm trying to import one Revit file into another. When I try to link the file I get a dialogue box that says:
"The import geometry will not be visible in the view using current settings. The Oringin of the import will be centered on the origin of the model instead. You can view the import in any view where its geometry is within the extents."
For this it sounds like the imported model is way off to the side or way up high or low but even in a view that I increase the extents to maximum i can't see the object.
I've tried "center to centre" and "origin to origin". I've check in the visual graphic and can't see anything turned off.
The file i am imported ia a structural model export from Tekla that I imported into a Revit and cleaned up. Everything looks fine when i open the file on it's own.
I am trying to put a URL link to a file in a components instance parameter, to show up in the properties palette, I can put the URL in there, but no link is established. How would I get this to link to the file?
View 1 Replies View RelatedI assigned my students to create lighting fixture family. I wanted them to create a drop-down list of materials within the family to allow a user to select from the list of materials. This is accomplished by using a nested family - the inserted family has the materials defined. The drop-down list appears just fine in the properties, but we aren't able to apply it to the extrusion. I have tried inserting each family type and using the Label parameter, but Revit won't allow the link.
View 5 Replies View RelatedI am trying to place a receptacle on a wall and I keep getting this message "None of the created elements are visible in Floor Plan: Basement Demo. Plan - Electrical View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings." I have everything turned on in my visibility graphics.
View 2 Replies View RelatedI'm trying to make a Wall Types Legend using the Legend function in 2011. I did the first wall type just fine, placed it in section, tagged the material, etc. Now when I go to place another wall in a section view, it tells me the component is not visible in selected view. They are both new construction phase, stacked walls.
View 3 Replies View RelatedIs it possible to create a non-plottable line style that is only visible in a plan view? I want to use something other than the invisible line.
View 3 Replies View RelatedAm getting warning "None of the created elements are visible in Floor Plan: 00 GF View. You may want to check the active view, its Parameters, and Visibility settings, as well as any Plan Regions and their settings". Phase settings are correct, no hidden elements etc. Cannot add anything by create similar, build panel. Its Revit 2013 - I have been getting a lot of cannot continue crashes but is this a forthcoming fix issue?
View 2 Replies View Related