Premiere Pro :: Possible To Loop Preview Between Work-area
Feb 14, 2014is it possible to loop the preview between the workarea (is it work area ?) start and end ? When i activate the loop, its not looping.
View 2 Replies
ADVERTISEMENT
Premiere Pro :: Return Work Area Bar To Automatic After Move It Manually?
Jan 30, 2014Is there a way to return the work area bar to automatic after you move it manually? I know about the alt-click to expand to teh entire work area but that is not returng it to the auto mode.
View 5 Replies View RelatedPremiere Pro :: Inserted Video Is Degraded From Source When Put Into Work Area / Timeline?
Dec 9, 2013I've never experienced this before, but perhaps that's beause I was never dependant on reading type in the videos I've previously produced.
how to keep the video quality of the source video when they insert it into the timeline?
AutoCAD 2010 :: Stuck In Plot Preview Loop
Oct 26, 2009AutoCAD 2010 SP2:
Upon setting up a drawing for plotting (the problem is not printer specific) the "Print Preview" gets stuck in a loop where I am unable to exit if I choose to cancel or alter the settings. I am forced to go ahead and send the plot. If iI immediately go back and run the PLOT command again nothing happens... no dialog box, no error nothing. I must then go to any other open dwg, do a save, and then go back to the original dwg. Then the PLOT command will again work, however, still getting stuck in the preview loop.
Premiere Pro :: How To View A Preview And Video Transition Between 2 Clips In Premiere Pro CS5
Feb 17, 2014How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
Premiere Pro :: Can Preview Video Without FX
Feb 23, 2014If is possible to se all video in preview but without video effects?
In Sony Vegas Software we can decide if we want to watch all our video normally or we can disable all FX by the 1 key and start to see without FX. It's very good if we have poor PC. For example, 1 screen is with FX, 2nd is without it and we select what we want to see:
Is that option in Adobe Premiere?
Premiere Pro :: Yellow Preview Bar With ProRes Clips?
Feb 17, 2014Even though I've made sure that my sequence settings are exactly matching my clip settings (ProRes4444 or 422HQ) I'm getting a yellow bar over my sequence.
I'm working on a 2012 Mac Pro running OS 10.7.5. I downloaded Premiere Pro CC earlier today; I thought I'd play around with it to see how it compares to FCP7. Most of my NLE usage is very simple, just assembling sections of motion graphics and 3D animations rendered out of After Effects in the ProRes 4444 codec.
The "New Sequence from Clip" function isn't behaving as I'd expect. The comparable feature in FCP creates a sequence that matches all aspects of the selected clip (size, framerate, codec, etc.). The Premiere implementation appears to only match the sequence size and framerate to the selected clip.
If I create a new sequence from a ProRes clip, or tell the sequence to match the clip, I'd expect that clip to be sitting in my timeline with no bar of any color. But I get a yellow bar. When I go to Sequence Settings I see that the editing mode is Arri Camera, and the Video Preview is greyed out on an MPEG format. I have to go to Custom and manually select Quicktime, then specifiy the matching ProRes codec. Shouldn't those wrapper and codec settings be matched automatically too when I've specified that function?
That said, if I go in and manually match the codec settings to my clip I still get the yellow bar. If I select another sequence and click back on the new sequence the yellow bar is gone.
I'm assuming that this yellow bar issue is a display error of some sort, because if I export the sequence with "Match Sequence Settings" selected the export happens very quickly as I would expect with a Smart Render-compatible sequence.
Premiere Pro :: Some Videos Clips Stuttering In Preview
Sep 28, 2013I tried reimporting the video and translating it to another format, I've rendered it fully, and deleted temp files and re-rendered it. I rebuilt the video from scratch in a new sequence created from the clip (all clips were screencaptured using Camstudio so they're the same exact format as each other.
But I still have constant problems with videos not playing properly in preview. The last time I had this problem, they rendered that way too. When I hit the spacebar to view the video, it shows a bit of the video, then rewinds and plays the same section over and over, moving a little further forward each time. Basically "rubberbanding".
It's Premiere Pro CS 5.5.2
Win 7 64
No third party codecs.
I have plenty of hard drive space and 8 gb of ram. I do have browsers open which use a lot of memory, but all the other clips are working so that doesn't seem like it should be an issue.I'm not using any kinds of plugins or third-party things.
Shutting other memory hogging programs and restarting Premiere.Things that seem to hurt: using the time slider to increase or decrease speed of the video.
Paint Shop Pro :: X6 - Picture On Preview Area Does Not Fill The Frame
Oct 26, 2013PSP X6. In the Manage workspace, in preview mode, the picture on the preview area does not fill the frame but about 3/4 of it leaving the right and bottom ends empty. It is the same with the 64b and 32b vertions.
View 4 Replies View RelatedPremiere Pro :: How To Unravel Files In Project Area Not Found
Apr 12, 2014I create 9 Premiere projects, each under a root directory (proj/p1;proj/p2;proj/p3;etc.).
As I was working on my videos I was capturing screen shots of the video and using them on different layers. that is, I would be in proj/p2 and I woud capture screen shots to proj/p2/assets. The problem is that sometimes I would forget to change the capture directory and I would be in proj/p3 and I'd capture the image to proj/p2. I did that a lot.
So, I changed to a different computer that had a different real path to proj and now, all the images I did the "cross capture" incorrectly don't show up. When I try to do a "reattach" the file that is showing not found, it does not actually attach it. I have to re-add it to my project and surgically replace the new file on the time line (very painful and slow).
Premiere Pro :: CS6 Crashes After PC Wakes Up From Sleep / 2nd Monitor Blocked By Preview
Oct 7, 2013When I work on a project in PremierePro CS6 v6.0.5 and put my PC to sleep, Premiere crashes almost every time I boot up Windows again. There is no error number or anything, just a window saying that PP does not work and I only have the option to close PP. So I basically have to quit Premiere every time and load up the project again when I continue working on it, which can take some time if this is a long project.
This also happens with other PC I could test this on. This is happening since the very first version of PP CS6. I had a chance to test PP CS5.5 on this issue and this was not a problem their. I was testing with Win7.
I already submitted this bug quite a while ago, but all the updates did not solve this problem.
There is also another bug I noticed related to the second monitor preview in PP CS6, that also is not getting addressed for quite some time. When using a dual monitor setup the full screen preview on the second monitor does not minimize if I minimize PP by clicking on the PP icon in the taksbar. If I use the minimize button in the PP window (top right) the preview on the second monitor stays in the background as it should. Also if PP is minimized and I am working with another application (reading a PDF or surfing the web fo example) the PP full screen preview appears after a while on its own and blocks the second monitor. So I have to go to the PP window and back the the application I want to work in in order to get rid of the preview monitor being blocked.Here you can see what I mean: [URL]
This issue has also been tested on other machines with Win7 and they all had this problem. This two issues are obviously not related to my setup because I can reproduce them on other machines.
Premiere Pro :: Preview And Render Corruption When Color Correction Added To Clip?
Jan 25, 2014But I've added some color correction and some of my clips seem to be rendering out corrupted once the effects are applied. If I toggle the effects off it goes away, but toggling them on again and it's back. I've restarted the machine several times and the corruption reoccurs in the same spots. Is there a cache that I need to toss? When I rerender or export the the file the corruption remains.The effects I'm using are basic, auto color, fast color corrector, and brightness & contrast. here's what it looks like.
View 2 Replies View RelatedPremiere Pro :: Get A Black Capture Screen (preview) / But Video Captures Fine
Feb 17, 2014I get a black capture screen when capturing with CS6 on a Windows 7 machine. I'm capturing through Fire wire from DV tape, via the VCR function of a Canon XL2 camera. I have tried restarting, etc.; also toggled the "preview video" radio from the Settings button in the capture Window. Nothing works and I need to be able to preview my video as I'm capturing. It is not good enough that the video actually captures fine. Also, I am forced to turn off Device Control in order to capture because it kicks me out of every capture (an immediate message of : "no frames captured") unless I do.
View 4 Replies View RelatedPremiere Pro :: Rendered Preview Files Not Loading After Mavericks Software Update
Feb 19, 2014Once I render and save a project, exit out, and come back in, the rendered files that I "saved" are not rendered. This all happened after the mavericks software update
View 1 Replies View RelatedPremiere Pro :: CS6 Just Won't Work?
Mar 5, 2014It's been months since I've been able to edit because Premiere CS6 won't load any footage. It hangs up for hours simply trying to open project folders to import footage. I've been using Premiere for more than eight years, and I've never had it behave this way...everything was perfectly fine under CS5.5; but, once I upgraded to CS6, the program became useless.
I've uninstalled and reinstalled the Master Collection suite and Premiere Pro individually more than once and nothing works. Short of taking the software and external hard drive home, I have no other Macs with which to edit.
iMac 12.2
OS X Mavericks
Core i7 3.4GHz
32GB RAM
Photoshop :: Photo Displaying In Work Area
May 15, 2013I cannot see my photo in my display/work area when I open one, what could be causing this? It displays that a photo is open in my layers panel, but I can see nothing on my screen.
View 1 Replies View RelatedMaya :: How To Undo Dark Work Area(s)
Jul 19, 2010I was going through an exercise and tried to use one of the listed shortcuts to viewing (Alt+LMB+click) and it made the Maya workarea screens dark grey. My attempted efforts to find out how to undo this failed.
Not sure if I mis-typed the above or what. Only the work areas are dark gray.
Illustrator :: Some Of Work Area Become Rasterized After Saved?
Aug 5, 2013Sometimes when I work on a complex design project, I've notice that after I save and re-open my file, some of my work area was rasterize and uneditable.
View 2 Replies View RelatedPhotoshop Elements :: Work Area Layers
Jan 9, 2014I recently upgraded from PSE9 to PSE12. I've noticed that once I'm deep into a many layered project that I can't click on a specific layer in the work area but need to click on the layer I want to work on in the layers palette. Is this something new in PSE12 or do I need to change something in Preferences?
View 1 Replies View RelatedPhotoshop :: Clone Stamp (preview) Does Not Work
Jan 18, 2013I use PShop CS5 + Bridge on a Mac “All in one”, all options works fine.Some time ago I changed some option (don’t remember which) to try new way of using the clone stamp.That is ok, but after that the “preview” of the clone stamp does not appear, as I was moved the the previous version of PS.
Some details:
I activate the clone stampset dimension, etc.I see the pointer, okMove the pointer to the source and clickThen simply move the pointer to the target areaBefore the problem without pressing any key I saw the “preview” of the effect. Now, I see the correct effect but only AFTER having clicked the mouse Reading previous thread, I reset the tool options, then reset all tools option, then checked the dimension of the pointer (in the general option section).Nothing changed.
I read that reinstall PShop is useless, since reinstall does not remove corrupted files if any (but which file?).Since every other feature is working properly, it looks like a strange setting I set without being aware of that …
Paint Shop Pro :: Can't Put Multiple Photos In The Work Area
Jun 13, 2011I just downloaded PSP 13...I can't put a few photos on the work space....I only see one photo at a time and when I move a photo I see the checkered area and not the other photos...at the top left I see the photo names and i can click on them and the photo appears but only one at a time...around each photo I always had an area where I could see the X at the top right , click on it and the photo would leave...but now it's hard to see where the X is...
View 2 Replies View RelatedRevit :: How To Work Out A Total Gross Internal Area
Jun 2, 2013Is there a way to report the total internal area for a building ? As in - the total area of a building up to the internal face of the external wall (including all internal partitions and walls).
We can use the Gross Building Area - but this includes the external walls - and doesn't update as the external wall envelope is added to. Ideally we would like a like reporting on the total internal area as the design / model is progressed.
AutoCAD 2010 :: Lines Not Smooth On Work Area?
Nov 21, 2012while tracing a plan on Autocad 2010, by accident I clicked on something, or performed some unknown commands. My lines, that were smooth just seconds before, suddenly became really pixelated, as if made of many small segments. And when rendering the plan on pdf, it is still the same, and the lines are really thick. I have checked, the line thickness is on default (0.25mm), but compared to renderings I've done before, this time the drawing has really awful lines.
View 3 Replies View RelatedPhotoshop Elements :: Change The Color Of The Work Area?
May 25, 2013Is it possible to change the color of the work area, in PhotoShop Elements 10, from dark grey to light grey. And....maybe do a contrasting Font color for the Toolbar ?
View 1 Replies View RelatedPhotoshop Elements :: Changing Colors Of Work Area
Mar 31, 2013I upgraded to elements 11, and am having a great deal of difficulty seeing the icons, with the 3 different colors of gray and light blue icons.it is all running together and taking a long time to find things. PSE9 did not have this issue. I was able to change the background area only.can we custom the colors, or is their a app that will let us.
View 2 Replies View RelatedCorelDRAW X4 :: Preview Pane And Thumbnails Don't Work Under Windows 7
May 9, 2010last week I purchased and installed CorelDraw X4. After I had watched the video tutorials I wanted to try out the preview function in the Windows Explorer which should work with Vista and Windows 7. A double click starts Corel X4 properly, but the preview or the thumbnail function doesn't work (message "no preview available"). Curiously the Corel paint Fotos work in the preview pane. Only cdr-files aren't previewed.
In the scrapbook the cdr files are displayed correctly.
how to activate this preview function?
AutoCAD Map 3D :: Print Preview And Plot Doesn't Work
Sep 27, 2011I'm using AutoCAD Map 3D 2009.
I've created a simple drawing in CAD that contains a cropped JPEG, a two toned hatched polygon in behind it two MTexts overlaying all.
I cannot view them in either normal plotting, pdf format, jpeg format and even dwf.
I've increased the ram used in the "Raster Extension Options" (2000 MB), I've set the plotting in the "Process Document" to "...In computer", I've saved it in older formats (2000/2004/2007), I've placed the drawing on both our public drives as well as the local, I've adjusted the "Raster and Shaded/Rendered Viewports" & "OLE" settings in the "Device and Document Settings" (None to Best). Not to mention the other variations in the plot menu.
I've tried everything I can think of and have read through several threads here and nothing works.
What drives me nuts about this, is that I'm able to print from a layout with no problems a 3D drawing, with 2D hatching, an extensive title block with hatching and a secondary overall viewport (minimal detail) in the main viewport area.
Illustrator :: Unchecking Preview Effects Doesn't Work
Nov 1, 2012I have a problem with previewing effects in Illustrator. When I do this:
- create or select object
- go to appearance panel
- choose FX -> Stylize -> Drop shadow...
- check Preview in the effects window (it works as expected)
- now uncheck the Preview checkbox (when unchecked, the fx is still visible)
So, unchecking this Preview checkbox doesn't work right. It is very annoying. It is broken for most of the effect in illustrator. Strangly, it works fine with rounded corners effect. But other effects... not.
Premiere Pro :: All Of Sudden Horizontal Flip Does Not Work?
Apr 18, 2014all of a sudden Hortizontal Flip does not work in Premiere Pro but verticla flip does - how can I fix this? has worked just fine in prior edits of the same project - just happening today...
View 3 Replies View RelatedPremiere Pro :: Gaussian Blur Does Not Work On JPEG
Jan 11, 2014Using Premier Pro CS6, I have placed a JPEG file on the timeline and have tried to blur it via Gaussian Blur. The instant I move the "Blurriness" number above 0.0, the Program monitor turns black. I have tried some of the other blur functions with similar results (i.e., no blurring). The blur functions do work on my videos. Do the various blur functions only work on videos and not still, e.g., JPEG? If so, is there a workaround to blur a JPEG file?
View 1 Replies View RelatedPaint Shop Pro :: Making Work Area Look Like Older Versions?
Aug 23, 2012Is there a way to make PS X4 open up images the way it did in older versions... i.e. each image opens up as a stand alone floating box so I can have them side by side? (See attached image)
View 2 Replies View Related