I got an error message regarding versioncueUI.dll : "this application ran out of virtual memory . please close some windows to free memory."
The problem is that I've enough virtual memory to run photoshop and other applications.
Every time i run CS3 and just click on anything or try to open something(In File>Open...) this exact message pops up:
"The specified module could not be found. C:Program FilesAdobeAdobe Version Cue CS3Client3.1.0VersionCueUI.DLL"
I tried downloading that file VersionCueUI.DLL from sites and pasting it in the folder where it belongs (3.1.0). I've tried reinstalling.
I think I did something with the polyline in my autocad, because it no longer makes lines it makes 4 sided planes. How to change it back?
View 3 Replies View RelatedI have a new Dell Precision M6300 Mobile Workstation with an nvidia Quadro FX 1600M video card. I have the latest video driver from Dell. With a second monitor (Dell 20 inch) attached via either vga or dvi, Photoshop CS4 becomes unusable in both the second monitor and the notebook display. If I remove the second monitor in Display Properties, Photoshop works splendidly on the notebook display.
Here is a typical case. I open an image, zoom in or select a brush and then the image abruptly turns into several large "blocks." The blocks can be filled with areas of cyan, white, transparency, blocks of the image, bits of another open image, and even blocks of images that were previously closed.
The latest Quadro driver from Dell is from May 2008. I checked with nvidia but they send you to the notebook manufacturer to get drivers for mobile cards.
I have Master Collections CS4 installed and have not run into any problems in dual-monitor mode with the any of the other apps. Seems to be isoloated to Photoshop.
iMac, OS 10.8.5 Photoshop CS 6. I have activated the Graphics Display Unit (or whatever it is called) and, with an image in Photoshop and its Layer selected, I do Filters > Render > Lighting Effects. I get the panel on the right called Properties and under it some sliders for Color, Hotspot, etc.
Burt moving the sliders makes no change to the image. Tutorials say that I should get a white elliptical shape with white blobs which should allow me to alter the lighting effects, ("Lighting Controls"?) but nothing appears. The tutorials show a "Menu Bar" should appear just under the three coloured blobs at the top left of the main window. That "Menu Bar" shows, from left to right, something like: a light bulb; Presets-Custom; Lights and three tiny blobs; some thing else; and at the right end, a check; Preview; Cancel; and OK in blue.
I think that "Menu Bar" with Preview checked must appear before I can use the lighting controls on the image.How the heck do I get to see a preview so that I can see and use the lighting controls?
My paragraph ends up asabc abaaacba abaca abacabac abcabac abacabc
Rather than
abc abaaacba abaca
abacabac abcabac
abacabc
used to use photostudio 5 but PS CS3 is supposed to be alot better so i got this and everytime i save it, (in mypictures folder) the preview and everything looks fine, but once i close the folder out and go back, it looks blurry and when i upload it to the web, its really blurry ...
View 1 Replies View RelatedIm looking for a brush that draws a template of a person ... like an outline of a person standing in the upright position.
I want to use this brush as a template for clothing design ... you know what i mean ...
I can use this brush to just paint multiple images of template people to draw clothes on
Software: Adobe Photoshop CS3
OS: XP w/SP3
System: Dell vostro 200, 2.20GHz Duo, 2GB RAM, 160GB HD (mostly free), Intel G33/G31 Express 128.
ERROR:
No error message displayed
ISSUE:
When cropping a photo, the crop tool highlights the photo correctly, but when the crop is activated it resized the photo to about 1 pixel, no matter how large or small the selection crop was.
Actions took:
I fully installed all the updates, when unsuccessful, I repaired the installation, when that was unsuccessful, I completely uninstalled and then reinstalled Photoshop.
So, I take a photograph (Nikon D70s raw format), get the colour balance right and sort out the curves. The picture looks great! Bright, crisp with zingy colours. So what happens when I Save For Web, flat, dull with muted tones. What am I doing wrong? The picture is in RGB 8 bit.
View 4 Replies View RelatedI have been using Photoshop for basic editing for several years, now. For at least the last three years (whether I have used Photoshop CS5 or now, CS6), if I automate a batch of photos, going through the process of selecting the source folder, then the destination folder for the edited pictures, my choice of destination folder is ignored — the edited pictures end up in the source folder.
View 1 Replies View RelatedLasso tool makes two selections at one time
View 9 Replies View RelatedI'm using photoshop CS3. When I use the healing brush like, it makes holes in the image that I'm using it on sort of like it's erasing that spot that I'm using it on instead of fixing that spot. How can I fix my healing brush so it works like it's supposed to - as described in my "Classroom in a book" for Photoshop CS3?
View 4 Replies View RelatedIn my work I use a batch process to run an action that converts EPS files to TIFF files. I have been using this successfully in Photoshop 7 on a Win2000 PC for a number of years. The process is as follows...
Open EPS file
Flatten Image
Save
Close
When I recorded the action I made sure that the resolution was set to 300dpi as we require the TIFF produced at the end to be that resolution.
I am now testing PSCS3 on a WinXP machine as we are upgrading all of our equipment. When I run the action as a batch process the TIFFs that are saved end up being 72dpi - They should be 300dpi. This worked in PS7 on the Win2000 machine and I am using exactly the same process in PSCS3 on the new WinXP machine, but something must be going wrong somewhere for the TIFFs to be saved at 72dpi instead of the required 300dpi. Any ideas?
I have found that the filter makes automatic changes to images. For example, if I correct a vignette with no sturctural sliders touched, then save the setting, the image appears in my editing window signifcantly altered with altered barrel configurations. So, I have to redo and compensate or just forget about it. This is not a problem with an image I want to correct--architectural, for instance. But, who wants to start fixing issues that the software is creating? I would like to disable this but have not found a setting yet.
View 5 Replies View RelatedCropping and saving makes my images disappear in CS5 Extended
View 4 Replies View RelatedI make a rounded rectangle, rasterize it, use the wand to select the inside of the shape, use the gradient tool to change the solid color inside to my desired gradient color, and (here's the problem) when it fills the rounded rectangle with the grandient, the rounded corners of the rectangle become not so round. How do I keep them nice and round and fill with my desired gradient?
View 3 Replies View RelatedIn CS2&CS3 when expanding current selection the final one has rounded corners - with more pixels the expansion is, the more rounded effect is visible.
View 8 Replies View RelatedAdobe Photoshop Elements 10 for MAC.
When I select content using the crop tool then hit enter (or the green checkmark) the picture just disappears. This happened all of a sudden a few days ago. I can do COMMAND Z to undo and the picture reappears. But every time I crop the picture disappears and the layer thumbnail just turns brown.
I just put in a new Radeon 5770 card (PCI slot 1) into my Mac Pro 2008 Quad Core which is running Photoshop CS3. Now, the cursor (on all tools) disappears when mousing over any open PDS document. In Indesign, the cursor for all tools shows and works - as well as other pragrams.
View 5 Replies View RelatedWhen I try to select areas in PS CS6 my whole document turns black. As soon as I deselect it comes back in view.Is there something wrong with my setting?
View 1 Replies View RelatedIn CS6 I created a clipping mask with an image above a type layer, and when I lower the opacity of the image layer, it starts turning the color of the text green? Why is this?
1. How could I lower the opacity of the image inside the text?
2. The same thing happens when I try to change the blending of the clipping mask with the text layer beneath it. Why is turning green?
I recently started having this problem in Photoshop CS6 where using the transform or selection tools makes all the layers other than my background layer disappear so I can't see what I'm selection or transforming. This happens randomly out of nowhere. I can be using those tools all day with no problem, and then out of nowhere it starts making things invisible.
There doesn't seem to be any other programs running that would cause it (not that that should be an issue, my computer could easily run all my Adobe programs at once if I wanted it to), and the only thing that seems to fix it so far is restarting Photoshop. But that gets old really fast when I have to do it over and over again. I tried calling Adobe, but somehow they're always closed, even during their supposed hours of operation.
'm using a Mac with the latest version of the Creative Cloud. I've been stuck with the sillest problem ever with the Character Tool.It started with the size tool. If I set it to 200px and press enter, it will suddently jump to 11443.91 px. It does the same thing if I use the slider (clicking the tT and sliding up and down), it will show me the right number, but the second I let it go, it jumps to a complete random number. If I put it at 300 px, it goes to 11443.91px ... again.Now, all the other character tools are doing the exact same thing. The line-height, the tracking, everything.
Here's all my system info if you need it:
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Mac OS 10.8.4
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
[code]...
Just installed CS3 and all my photographs on my monitor look dark and overly contrasted when compared to simply opening the image on the Microsoft viewer. I thought it was a color management thing but it does it even when turing it off.
View 5 Replies View RelatedWhat give that waddle and shake to skin. Which tools do I use.
View 7 Replies View Relatedusing LR5.2, iMac, OS10.8.5
Suddenly LR no longer makes a copy when I select "edit a copy", for example "edit a copy with LR adjustments", in PSCC.
Instead, it sends the MASTER to PSCC.
In the case where I have done no editing in PSCC and simply try to close the PS edit window, I always have to click "Don't Save", whereas before this GLITCH in LR, PSCC would simply close the image since I had done no editing.
Don't know if these two things are related but I have used both for many years and this is the first time I have seen this problem.
I used an online txt to jpg converter and it generated a jpg of the txt file as if it was screencapped because it was too large to manually screencap it... but there is tons of speckles around the lettering and when I use despeckle it makes the speckles SO MUCH WORSE, you cannot ever read the text!!! I don't know why despeckle is doing the EXACT OPPOSITE!!!
View 1 Replies View RelatedWhen Vegas Video is up, 2012 starts to beep when I scrub an animation, when I change some numerical values, when I click some buttons, when a file is saved. Beep beep beep. I shut Vegas down and max is back to normal. I can take Vegas to a different monitor and it still beeps. Only thing that will stop it is shutting down Vegas, which is unfortunate because I use it all the time.
View 4 Replies View RelatedHaving problems with my 3d viewMy pc video card crashed yesterday and restored it as well but all of a sudden my 3d got screwed... zooming in and out makes all the lines dotted....
I already restarted my pc yet the problem still there, now i dont know if my cad is the problem or the pc, but i tried to render and its ok, only the views im having problems with.Another is when i edit block, zooming in and out... i see multiple lines... ?
Is there a plug-in that makes lightning lines? I know how to make them glow, but making the lines never seems natural to me.
View 3 Replies View Related