Photoshop :: Slow Down On Network With...
Jul 3, 2008
We recently installed the CS3 suite onto our school workstations. The problem we are having is that students are getting slowdowns in Photoshop in terms of waiting for menu drop downs and general unresponsive behavior. The applications are installed locally on the computers but the application data folders for the students are redirected to the main file server. As more students use Photoshop (>16) the slowdowns become more noticeable. Sniffing the network packets we are seeing a large amount of small files being opened and closed back to the application data folder on the server. I guess my question is, is there any way to force photoshop to use a local application data folder for all users? The network & file server they are writing to is quick but I suspect not quick enough for all of these small files.
Workstations: XP Sp2 Core2 Duo 2.33ghz 2Gb RAM
Photoshop 10.0.1 CS3 Extended
View 4 Replies
ADVERTISEMENT
Jun 18, 2005
I'm using windows XP with Photoshop CS.
Whenever the network cable is connected to the computer, Photoshop start-up load time is significantly longer than when I pull the network cable out.
View 4 Replies
View Related
Jul 24, 2012
My render servers slow down after ca. 20min (I don't know the time range, yet.)
They render in mental ray a frame in ca. 2-3Min... after 20min it slows gradually down to a exorbitant render time... The scene complexity do not change very much!
Maybe it depend on the fact that i render on windows 8 "release preview". With the older "Consumer Preview" i have no trouble.
View 1 Replies
View Related
Aug 14, 2013
We're an IT company that installed a new NAS for all the data in a architectural office.They are using AutoCad 2011 / 2012 / 2013LT / Revit 2011
Since we installed the new NAS and copied all the data from the old one, opening and saving files takes too long. Sometimes the files hang while regenerating. Saving can take up to more then 4 minutes.
Other applications, for example photoshop, work fine. Copying files from the local disk to the network drive, even moren than 100MB works fine.All computers have windows 7 and the NAS is from Synologie.We tried reinstalling AutoCad but that doesn't solve the problem.We tried setting the savefidelity to 0 but that doesn't solve the problem.
View 9 Replies
View Related
Jan 24, 2012
I've been having a problem with Draw X5 freezing for a few seconds every minute or so. Quite often when I try to drag an object around the page everything stops (program freezes) and I have to wait a few seconds till it starts again. Also happens sometimes when I drag an object to a new layer. Actually it can happen on any action.
All the .cdr files are located on a network server, but today I've come to the conclusion that Draw is somehow referencing the file every few minutes (usually something like just one minute between pauses). And because it's a bit of a slow connection speed between the network and my pc, the program hangs (like its slower to save and load from the network, than my local drive). I've got the Save Backup set to 30 mins so would have thought I'd only get an odd pause every 30mins (and turning off auto backup).
I thought I'd see what a file was like which was located on a local drive and so far no pauses. While I can obviously save to my local drive to work on, then save back to the network, it's a hassle and not ideal as it's harder to track the up-to-date file versions. This doesn't happen with any other program I use, and they're all saved to a network server.
how I can stop Draw X5 looking at the file location until I save or auto save? My system is Win7 64bit 12GB i7 core, Nvidia GTX 460. The program has all the service packs etc. I've turned off the live text to no avail. There is no added junk (colour spaces etc) in the files. It happens no matter what the file size. And it's not my antivirus, as I turned it off and the odd pauses continue.
View 10 Replies
View Related
Feb 23, 2012
We have 13 machines that are identical hardware and software; Windows 7 and the Autodesk Product Design Suite 2012 as well as the Vault 2012 Client. Two of these machines are exhibiting the following behavior: Connected to our LAN with access to the internet not loading Vault on startup Inventor loads in 68 seconds.Disconnected from our LAN with no access to the internet not loading Vault on startup Inventor loads in <10 seconds. I have tested this with our AV turned on and off with no changes in the above noted behavior. These two machines loaded Inventor 2011 in repsectable times ~<30 seconds.
Now this tells me that when Inventor is loading it is trying to go somewhere when there is a network connection. But where and what can I do to make it stop?
View 3 Replies
View Related
Apr 23, 2012
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
View 14 Replies
View Related
Dec 7, 2012
I am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).
For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.
The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.
While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?
P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost
"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."
View 9 Replies
View Related
Aug 23, 2013
how to make my photshop application fast few days ago it was working good but now its performance is slow and my computers speed is also slow. How to fix it?
View 1 Replies
View Related
Feb 18, 2008
I have three PC's that have a problem saving files to a Gigabit NAS. All three started having this problem this morning. It has been working like a champ for 3 months. Open a picture in PS and try saving the pic to another format on the network drive.
PC 1 I get " Could not save as pathfilename because of a a program error. PC2 I get " Could not save as pathfilename because of a a disk error. PC 3 I get " Could not save as pathfilename because the file could not be found. Now I created a new Volume on the NAS and I can now save to that new Volume.
I can read from existing files on the NAS and save in every other CS3 app. Funky. I can save the PS file locally and on other PC shared network folders. I did the 3 finger salute for prefs and did the font CMAP Base thing that was suggested. I changed the memory allocation. Removed mapping and remapped. Virus and spyware free Any ideas?
View 3 Replies
View Related
Mar 23, 2004
On my Windows PC, I am having a strange issue when trying to edit a photo ( between 35 and 45 megs) with photoshop over the network. The smae pic works if I download the image onto my dekstop and edit it from there, but if I try to edit it over the network, odd things happen. It has shut down photoshop, and once it even rebooted my computer.
View 1 Replies
View Related
Dec 2, 2008
I'm having technical difficulty when Saving As in Illustrator, Photoshop and InDesign CS2. I can save to my computer but when I attempt to SAVE AS to my server it will take about 5 minutes and give me an I/O error or corrupt the file or the entire program will shut down. Often I will have to restart the entire computer. I've checked the network lines and they are fine. It only does it to my computer and none of the other 4 in my office.
View 2 Replies
View Related
Oct 27, 2008
Opening a 640x480 8 bit .psd file stored on a local machine is taking 30 seconds or more...unless I unplug the network cable. Then it opens instantaneously. It can be any file; I've tested more than one.
While I'm waiting for the file to be opened, I can see short bursts of outbound network activity.
View 1 Replies
View Related
May 10, 2009
Our home network is a Vista PC with an Epson 2880 printer attached to the Vista PC. My wife's XP PC connects through our simple network and prints on the Epson printed by going through my computer. Simple set up, no problems. We both use CS4, set so CS4 manages color, correct Epson paper profile, printer color management off, all the correct settings. Both our monitors are color corrected with Spyder3.When she prints from her computer every picture has a magenta cast. Even more strange is when I copy the same picture onto my PC and open it in my copy of CS4 the picture looks normal but CS4 will not print it. CS4 says I do not have a printer attached. I can open any other picture in the same CS4 session and print with no problems. Every time I try to print a picture that she printed CS4 says there is no printer. This occurs even when I have copied the picture onto my computer and opened it on my computer. I have tried renaming the picture and even changing the format to TIFF or JPEG but CS4 still refuses to print it.I can open a new blank document and use the move tool to move the picture onto the blank document, At this point I can print from CS4 normally AND the picture will not have any color cast?
View 1 Replies
View Related
Aug 11, 2009
I just got a couple of computers linked via Network Magic. I can open images in CS4 Extended Editor but Bridge keeps crashing. Anyone had, or heard of ,
View 1 Replies
View Related
Nov 19, 2012
Is it possible to use a network drive as a scratch disk? I have very little space left on my only internal drive and don't want to have to purchase a drive just to connect to my PC for a couple projects.
View 7 Replies
View Related
Dec 29, 2012
I am using Photoshop Elements 11 on Mac OSX Mountain Lion and want to store my catalog on a local network drive (FreeNAS). I have encountered many problems while attempting to do this. Then I noticed in the Elements Organizer help, under the section "Repair a catalog", the following: "Note: (Mac OS) You cannot access catalogs present on a network drive."
View 5 Replies
View Related
Feb 25, 2014
Or am I going to run into trouble storing the catalog on a network drive?
View 1 Replies
View Related
Jan 8, 2013
I use a Windows 7 64 bit Dell at home and at work. Both have Photoshop CS6 (not extended). This week when I saved files at home using file compatiblity (since co-workers in my office are on CS 5.1) and FTPed them from home to the work network I ran into all sorts of issues.
5.1 users reported getting all sorts of errors including...The document contains unknown data which will be discarded to keep layers editable... and another one about missing "color books"
I read about cross version problems with shapes with the new CS6 vector strokes applied. Sure enough, when I sent CS 5.1 co-workers small test files by email they could open all of them but the one with the shape with CS6 vector stroke. So I went back to the larger PSDs and removed the strokes from any shapes, but the office still could not open the files.
I too, even though on the same CS6 product get an error "There was a problem reading the layer data. Read the composite data instead?" If I click to do so I get another error "Could not complete your request because the file is not compatible with this version of Photoshop" which is simply not true wince both are CS6
View 3 Replies
View Related
Mar 13, 2013
Am seeing an issue with Photoshop7 , cannot save files to a network drive using .psd format..It says Disk space full, though there is more than 1TB of space available on the network drive..This happens when tryingto save file in .psd format using Save as option within photoshop.There is no issue in saving the same file locally and copying it fom local drive to network drive..OS is windows 7.
View 2 Replies
View Related
Jun 12, 2009
The error is the following: "Error 1606. Could not acess network location 0." It happens after the computer specifications process. I've tried to search for solutions, but with no results at all... I've tried to track it down in registry, but also with no results.PC: LG E500OS: Windows Vista Home Edition Help?
View 3 Replies
View Related
Oct 26, 2012
I have a home network with windows 7 on a desktop and laptop. Adobe Elements 9 works fine on the desktop but when i try to print from the laptop a box appears saying 'could not complete your request because an error occured while printing' All other programs print fine from the laptop, Paint, Word, PDFs. Have uninstalled and cleaned registry before reinstalling, But still cant print with Adobe.
View 1 Replies
View Related
Apr 10, 2013
It has been reported and reproduced by Support, an issue whereby Photoshop .PSD files disappear when they’re saved to a network file share. Upon initial investigations Support have observed the following behaviour when saving a Photoshop file.
The document is initially saved as a new file on the file share.The original .PSD file is deleted on the file share.The newly created file is renamed to the same name as the original file.
An issue often arises when steps 1 and 2 complete however step 3 fails. When a file is reported by users as having disappeared, the new file created in step 1 can be renamed from .00_ to the original *.PSD file name on the server as the *.00_ files are normally hidden by the desktop operating system. This allows people to see and open the file from both PC’s and MAC’s using AFP and SMB protocols.
A related issue often reported by users is that they receive an error message “Could not save as” when trying to save a .PSD file. Troubleshooting the issue confirms that the user is able to save the file if they perform a “Save As” operation in Photoshop.
From the reported problems and observations there is clearly an issue with how Photoshop performs a file save operation further exacerbated by the fact the process doesn’t fail safely.
View 2 Replies
View Related
Mar 21, 2013
I'm on a mac and I'm trying to run the photoshop script "Layer Comps to Files" - which works fine .... UNLESS I'm connected to an SMB network drive with "users" in the path.
NOTE: I am not trying to save to the network drive!
NOTE: Each test I'm doing is exactly the same (other than which network drive is connected)
NOTE: Just having the network drive connected with "Users" in the path messes things up!
eg.
Script does NOT run if I have an SMB drive connected with "Users" in the path, e.g.: [URL]...As soon as I disconnect the SMB drive (I don't even have to close photoshop) the script runs perfectly fine.The script also runs FINE with other SMB network drives withOUT "users" in the path, e.g.:[URL]...
I found this thread from 2010 (which has never been resolved but is inconveniently read-only now) has the same issue with CS4 and it still isn't fixed in CS6:[URL]...
View 2 Replies
View Related
Oct 8, 2012
We were using Photoshop CS3 and decided to upgrade to version CS6. However, several times, to save images and if they are in network storage or servers, the message that you can not save them, because of a program error.
View 37 Replies
View Related
Aug 31, 2012
I was trying to import my photos into the Organizer (PSE10) and noticed that it didn't accept a network drive as a watched folder.
My family stores all photos on a shares NAS drive and I would like to use it with PSE10.
Currently, I can only use PSE10 with the photos I import on my local machine, but I cant organize the rest of the pictures.
Is there a way to trick PSE to add a network drive to the organizer ?
View 8 Replies
View Related
Oct 17, 2012
I have a fairly large catalog with about 20 album categories, each with between 5 and 15 albums, totalling about 20,000 photos, all currently residing on my laptop. I need to move everything to a networked drive but can't find how in the Elements help system.
View 3 Replies
View Related
May 8, 2013
I have a catalog of 13k+ photos that I'm trying to clean up. I'm using Elements 7, I have purchased Elements 11, and am planning to install it soon. Part of my photos are physically located on my hard drive, and part are on a network drive mapped as J:. Elements finds these photos on J: but I don't think that the Elements Catalog is aware that J: is a network drive/removable drive. It looks for them every time I open Elements, making the program very slow to start up.
Should I use the "move to removable drive" to move these photos? How will Elements treat these photos that have been sent to a removable disk? Will I still be able to see thumbnails of the photos and search through my tags for them? If I copy my photos to a new drive, but still call that drive J: will Elements be able to find them? And finally, if I perform this "move to removable disk" task, should I do it now with Elements 7 or update to Elements 11 first?
View 2 Replies
View Related
Oct 27, 2012
I have recently re-installed Photoshop CS3 in my new Windows 7 (64-bit) computer and fell foul of the Bonjour Service problem that trashed my Internet connection by installing an "unknown network". I have remedied this by disablng the Bonjour Service in Windows Services Manager.
As I plan to upgrade to PS CS6 on this computer:
1. Does CS6 use Bonjour?
2. If it does, and I have to disable it for the reasons above, will I be able to register and activate CS6 online, and will I be able to get updates?
View 1 Replies
View Related
Oct 2, 2012
I want to move my entire photo collection from the 'C' Drive to a network drive that I recently installed. As a followup, I also want to access (add, enhance etc.) the same collection then with a laptop that also has Photoshop Elements V10 installed.
View 1 Replies
View Related
Oct 23, 2008
I am getting lots of problems with CS4, some of which have been covered in separate topics on this forum. In the main, it seems to me that there is a real problem with CS4 processing relatively small amounts of data. The difficulties I am experiencing are:
1. Text tool very slow. Just typing a few letters sees my CPU usage shoot to 50%. There is a lag of about a second between typing the letters and their appearance on the screen.
2. Pen tool very slow with significant lag when using the mouse and CPU again shoots to 50%, even for a short line. If I use the tablet (Trust) it sometimes works, but suffers the same lag as the mouse when it does. Most of the time, though, I just get a faint straight line between the start and end point. This morning I got the same straight line symptom on the mouse!
3. Screen redraw can be painfully slow and blocky, but this fault is really sporadic
4. There is no apparent difference whether I have GPU active or not. However, I have just had a strange message. When GPU was disabled I restarted CS4 and got the message that there was a problem with the display driver, and PS was therefore disabling GPU enhancements! After that, the pen worked fine, and the mouse too, but then the mouse started losing curves.
I experience none of these problems when I run CS.
My video card driver is up to date. The trust tablet driver is the latest, but I really do not think this is the issue, as the drawing problem also affects the mouse.
System spec - XP with SP3, AMD Athlon 64 X2 4800+, 2GB RAM, nVidia Geforce 7600GT, Program on Raptor 70GB, Scratch on separate 70GB Raptor
View 6 Replies
View Related
