I am using Photoshop Elements 11 on Mac OSX Mountain Lion and want to store my catalog on a local network drive (FreeNAS). I have encountered many problems while attempting to do this. Then I noticed in the Elements Organizer help, under the section "Repair a catalog", the following: "Note: (Mac OS) You cannot access catalogs present on a network drive."
View 5 RepliesOr am I going to run into trouble storing the catalog on a network drive?
View 1 Replies View RelatedI have a catalog of 13k+ photos that I'm trying to clean up. I'm using Elements 7, I have purchased Elements 11, and am planning to install it soon. Part of my photos are physically located on my hard drive, and part are on a network drive mapped as J:. Elements finds these photos on J: but I don't think that the Elements Catalog is aware that J: is a network drive/removable drive. It looks for them every time I open Elements, making the program very slow to start up.
Should I use the "move to removable drive" to move these photos? How will Elements treat these photos that have been sent to a removable disk? Will I still be able to see thumbnails of the photos and search through my tags for them? If I copy my photos to a new drive, but still call that drive J: will Elements be able to find them? And finally, if I perform this "move to removable disk" task, should I do it now with Elements 7 or update to Elements 11 first?
I get the error message Lightroom catalogs can not be opend on network volumes, removable storage or read only volumes.
View 1 Replies View RelatedI have my complete catalog of Lightroom 3.5 currently on my harddisc of my PC (windows 7). I want to move this catalog to a network based RAID disc and work from there. I've exported my catalog to the networkdisc but how do I tell Lightroom to use that catalog instead of the one on my local drive?
View 25 Replies View RelatedI am working on a group of about 20,000 pictures. It is the stored photos of multiple users on a network drive. My job is to organize the pictures in LR. When I am done, several users will be sharing the catalog. The workflow the group wants to use involves downloading the catalog from a shared site on the network to their desktop. The users would then upload the latest catalog back to the network when they are finished. They are used to the communication this involves and share other work this way.
I am working from my home computer. (The VPN was too slow) I have the pictures at home on a portable external drive. The catalog is on my internal drive. When I have a section done, I export it as a catalog onto the external drive. I import it to the latest version of the master catalog on a desktop at work. The work computer security does not allow me to directly work from my portable external drive so I have to copy and past the import catalog on to the desktop before I import it. When I import it to the master catalog, I move the pictures to the network drive.
My main question is can the users back-up the catalog on the network drive? As part of their workflow, they would automatically back-up the catalog to the network. The next users would then download the back-up to their desktop to use. Once a week, we would clear old back-ups.
Also, are we losing information from the catalog when we copy it back and forth?
I am losing print presets (and import presets) as I test this. When I test the process on two computers at home, this does not happen. I wonder if it is the work computer security? Part of my workflow is to create a pdf contact sheet to send to the user. I use the form pdf wizard to make it interactive so the user can fill in whether to discard the picture and identify people/add text. I e-mail them the contact sheet. They e-mail it back completed. The preset can be recreated but it is tempermental. I want something I can leave for the users.
Is it possible to get a Pipe Network Catalog for SUDAS specifications??
View 3 Replies View Relatedcreation of new pipe network catalog, such as creating pipes, structures, rules etc.
can I do it from AutoCAD Civil 3D itself or ?
I have 26,000 images on an external drive (currently designated drive M), almost all tagged and/or rated and indexed in two PSE 11 catalogs on the main PC hard drive. I am just about to replace my PC. I assume that when I connect my external drive to the new PC, it is unlikely to be Drive M. How do I maintain access through the catalogs with all the stored information?
View 2 Replies View RelatedI am using Elements 7 and wish to retrieve photos stored online. How do I do that?
View 1 Replies View Related(Using Windows 7 Professional - 64 Bit; Civil 3D 2013)
No changes have been made to the pressure network catalog (default, as installed and located in the default location on each machine).
I begin by setting the pressure network catalog and choosing any of the sqlite database files in a new blank drawing. In the "Create Pressure Pipe Network" dialog, I try to edit the parts list, but an error shows up and says "This Pressure Parts List references a catalog that cannot be found. As a result, you may be unable to add parts to the network.". Everytime I set the catalog, Civil 3D seems to immediately forget which sqlite file was selected. This problem has been encountered on multiple workstations in our office. Only 2 workstations retain the catalog selection and will allow a pressure network to be created with no issue concerning the selected catalog.
I know I can go into the AeccSetNetworkCatalog command and set the file path but I want to do it pragmatically. Is there any way to do this? If so I don't know where it is located?
View 2 Replies View RelatedWe recently installed C3D2013. We were using our profile from 2012. When we tried to set the Pressure Network Catalog and then edit the Standard Parts List, we get a message that it references a catalog that can't be found. I have seen this on other posts.
I changed the profile to the out-of-the box profile, and now it will let me edit the Standard Parts List. When I drag the parts list in the _AutoCAD Civil 3D (Imperial) NCS into my original drawing, it loses the material.
What element of the profile allows it to set the Pressure Network Catalog and have it work? Does the Parts List in the template play any role in the interactivity between the Catalog and the Parts List?
Also, if I copy the Pressure Network Catalog folder from the C drive to a network drive, I again get the message that it references a catalog that can't be found. Can the catalog not be moved?
We have 11000+ plus photos all carefully cataloged in Photoshop Album 1.0 on my old Windows XP PC. Our new PC is Windows 7 Home Premium with Photoshop Elements 9. How do I import our existing catalog and continue sorting our new photos into our old catalog?
View 1 Replies View RelatedHow do I prevent my files from being stored on multiple storage drives?
View 3 Replies View RelatedMy latest battle with PSE11 is trying to access my catalog in PSE11 via the Catalog Manager but it doesn't show up in the list.
The catalog is named My Catalog 2 is located at C:ProgramDataAdobeElements OrganizerCatalogsMy Catalog 2. It is the only catalog I use and is the one that opens up when I launch Organizer. But, for the life of me, I can't get it to show up in the Catalog Manager. The only catalog that shows up is the original catalog which is at a different location and was created when I installed PSE11 on my new computer (Thinkpad W530, Windows 8). I've tried the Custom Location option and browsing to the location, but still no dice. This catalog has thousands of pictures and was converted from my previous PSE6 catalog. How do I get the Catalog Manager to find my current active catalog?
How do tags and catalogs transfer with photos stored on a portable hard drive? I use PSE 9 on two different computers.
View 4 Replies View RelatedI have a home network with windows 7 on a desktop and laptop. Adobe Elements 9 works fine on the desktop but when i try to print from the laptop a box appears saying 'could not complete your request because an error occured while printing' All other programs print fine from the laptop, Paint, Word, PDFs. Have uninstalled and cleaned registry before reinstalling, But still cant print with Adobe.
View 1 Replies View RelatedI was trying to import my photos into the Organizer (PSE10) and noticed that it didn't accept a network drive as a watched folder.
My family stores all photos on a shares NAS drive and I would like to use it with PSE10.
Currently, I can only use PSE10 with the photos I import on my local machine, but I cant organize the rest of the pictures.
Is there a way to trick PSE to add a network drive to the organizer ?
I have a fairly large catalog with about 20 album categories, each with between 5 and 15 albums, totalling about 20,000 photos, all currently residing on my laptop. I need to move everything to a networked drive but can't find how in the Elements help system.
View 3 Replies View RelatedI want to move my entire photo collection from the 'C' Drive to a network drive that I recently installed. As a followup, I also want to access (add, enhance etc.) the same collection then with a laptop that also has Photoshop Elements V10 installed.
View 1 Replies View RelatedI am using Civil 3D 2013. I work in an office where we have a few different flavors of Autocad (LT, MEP, regular vanilla AutoCAD etc...) and versions (2010 LT, 2011, 2012, 2013).
For the most part there isn't much inter-office drawing coordinate that has to happen, but there is the occasional project where multiple disciplines (Structural, Mechanical and Civil Site) have to share drawings.
The specific problem I am having is when I share my 2013 Civil 3D drawing with a user using 2011 MEP. He gets the typical rectangle for the proxy objects (in my case, my pipe networks for sanitary and storm drain). We've tried downloading and installing various object enablers, but there doesn't seem to be one for a 2013 to 2011 scenario. So I setup my parts to be on layers that he can just turn off. HOWEVER... the actual pipe network (not the structures, parts, labels etc... the network itself) ends up on layer 0. For this specific project, I do the old (ssget "x" '((8 . "0")) search to select all objects on layer 0, add those objects to a selection set (pselect), then in my modify objects dialog I filter for pipe networks, then change the layer to something other then 0.
While this is a workaround that works for me, what I really want to know is if there is a way that I can change the default layer that the network (again, not pipes, structures or text, the actual network) so I don't have to use the workaround. Any thoughts?
P.S. It's killing me that I had to create a new Autodesk login and now all my AutoCAD "street cred" is lost
"The source of expertise is not in the memorization of the minute details of a subject but in the thorough understanding of the fundamental concepts on which it is based."
How do I get my photos from Elements 10 to Elements 12. When I installed Elements 12 I didnt get aprompt to do so.
View 1 Replies View RelatedI recently bought a new computer and with I ordered photoshop cs2. This would be an upgrade from elements for me. My question is can you move the catalog from elements with all the tags etc. and put it into photoshop cs2 with adobe bridge. I need to know because I plan to reformat my old computer before photoshop arrives and if I should back it up.
View 1 Replies View RelatedWhen I try to backup catalog, elements orgainizer says it requires about 400 terabytes, (photos really take up 26 gb) What gives?
View 3 Replies View RelatedI have a new computer and have installed Photoshop Elements 10. Can I transfer my PSE 3 catalog to the new computer?
View 5 Replies View RelatedWhen I try to backup the catalog, it starts to calculate space; at 24% through the process photoshop appears to freeze and no further progress occurs. How can I get past this problem?
View 9 Replies View RelatedI have pse11 and i've lost the catalog with all my photos. I was in "manage" catalogs and somehow set up a new catalog. It contains no picshow do I restore?
View 7 Replies View RelatedI use different catalogs in my PSE10 for different purposes.The file name of the catalogs is always the same: catalog.pse10db.Ok, they are in different directories. And have have only one open at the same time.But could it be a problem in a specific constellation? So would it be wise to renamethe file names of the catalogs - like catalog_tim.pse10db ?
View 1 Replies View RelatedIt stalls during the "Calculating Total Media Size" operation. All else seems OK. I am able to "Save Metadata to Files" and "Prepare Files". I'm running Windows 7 64bit w/ latest updates.
View 4 Replies View RelatedHow do i move my catalog from Elements 10 to Elements 11?
View 2 Replies View Related